How can i get my ipod toout of the white screen

how can i get my ipod off the white screen

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar                              

Similar Messages

  • How can I get my ipod to list the "album artist" instead of "artist" in the music menu, but still show the artist with the featured artist when a song plays?

    For example, I am putting Kanye West's album "808's & Heartbreak" on my ipod. The track "Amazing" features Young Jeezy. So in iTunes, I list the track name as "Amazing", the artist as "Kanye West ft. Young Jeezy",  the album artist as "Kanye West", and the album as "808's & Heartbreak". What I want is for my iPod to have a list of album artists instead of artists, so that I can find the song "Amazing" under "Kanye West" instead of "Kanye West ft. Young Jeezy" or "808's & Heartbreak".
    And when the song plays, it should say:
    Amazing
    Kanye West ft. Young Jeezy
    808's & Heartbreak
    Is there a way I can do that? I tried using the "album artist" field thinking it would do what I wanted to do, but it didnt. I also tried using the "sort artist" field and typed "Kanye West" in there, but that didnt work either. I wish iTunes was simpler and easier or atleast CAME WITH A MANUAL. Any help would be greatly appreciated THanks

    Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones?  You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack.  Lastly, check the headphone jack for any signs of debris or damage.  You may need to have the headphone jack replaced either by Apple or a third party repair company.
    I assume this static is present on any track you listen to versus only particular ones?
    B-rock

  • My old computer crashed, so I bought a new computer. How can I get my IPOD music in the new computer

    my old computer crashed. I bought a new one. I installed Itunes, with a new account. I cannot get my music from my ipod touch to the new computer. It is all music I had downloaded from cd's I have purchased through the years. Every time I try to authorize the new computer, it wants a credit card number for the ITunes store. I don't want to buy more music now, I just want to be able to get my songs in my new computer. This is driving me crazy. any help, since the phone support is not available when I am. Thanks.

    The music sync is one wa - copmputer to ipod.  The only exception is itunes purchases.
    It has always been very basic to always maintain a backup copy of your comptuer.  Use your backup to  put everything back

  • How can I get my iMac to be the primary screen again?

    Hi everyone!!
    A couple days ago I was watching a movie on my tv, which is my ''external monitor" for my iMac. I used VLC and it was full screen on my tv, I never had any problems with it. After the movie ended, I couldn't get my iMac screen to work. I restarted, and it flashes a white screen and it does make the apple startup sound. Also everything seems to be working just fine. When I hook it up to my TV, I can use my tv as the ''main monitor" but my iMacs screen remains black. (I have it in mirroring mode now) When I restart by pressing the on and off switch, I do get a flash of my current screen, but it fades to black quite soon after. Even if I wake my iMac up, it shows me the log in screen for about half a secodn and also fades to black. So it's not the screen itself that has any issues.
    I think I accidentally clicked something in the display settings, but I have no idea how I can get my iMacs screen to work again. Does anybody know how to get my iMac back to functioning as a primary monitor? When I unplug the thunderbolt cable, it doesn't switch back either.
    I already tried dragging the apple top bar from one screen to another, but it doesn't work. When I reset the PRAM, it does restart, but right after I hear the second chime the screen still remains black and it boots like it did before, still no functioning iMac screen.
    Thanks in advance!

    The screen is all black, so it's not the backlight. It's weird because when I get the computer off of sleep mode, it shows the log in screen really quickly. So my LCD isn't broken either. It just switches back to the wrong resolution I guess. Which makes the screen black again.

  • How can i get Firefox to show on the whole screen/ it just uses the middle of the screen and not the whole screen Thank you

    Certain web sites only use the middle of the monitor screen and do not show all their content on the right

    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • How can I get my iPod to shuffle the songs far more?

    Hi there,
    On my mate's PC where she has an older version of iTunes, she has the option under 'Preferences' where she can set the shuffle to less likely, normal or more likely. As a result, she's now hearing tunes that she hasn't heard in ages.
    I tried this when I got back, but my iTunes (version 8.1 odd) doesn't have this option, only the ability to mess around with cross-fading and volume limit etc.
    Any help would be much appreciated as it seems like I'm always listening to the same songs!
    Thanks a lot.

    There's no way to change the shuffle settings on the iPod. However, you can create a Smart Playlist where one of the parameters would be Last Played not in the last 7 days (or whatever duration you choose). Be certain to check "Live Updating". When you sync your iPod, the new playlist will be added. As songs are played, the "Last Played" is updated and you should not hear that song again for at least 7-days (or whatever duration you choose). Each time you resync your iPod, the playlist will be updated automatically (songs that have "aged" will be added, songs you have played will be removed).
    Now all you need to do is turn shuffle on, choose the new playlist, and you are good to go.
    A side note, I may be wrong, but I believe the shuffle setting you are referring to only applies to iTunes and to the iPod.

  • HOW CAN I GET FIREFOX TO OPEN TO THE FIREFOX SCREEN WHEN I CLICK ON THE ICON WITHOUT HAVING TO ENTER MY NAME AND PASSWORD EACH TIME ON MY MAC.

    CLEAR ABOVE

    Third item in the table marked identified with <url>
    * Command line arguments - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Command_line_arguments
    which is essentially the same as if you just change your home page
    * How to set the home page | How to | Firefox Help<br>https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page
    You might want to consider using a simpler home page, ideally one that is on your local drive, so you know Firefox is working even if you don't have a connection.
    But your choice is much better than choosing a home page that just interfaces with a search site, when there is a builtin toolbar that can bring up any search that you care to add an engine for.

  • How can you get your ipod touch serial number from apple beacause my ipod was stolen

    how can i get my ipod serial number from apple

    http://support.apple.com/kb/HT2526?viewlocale=en_US
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

    I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

    Most Windows users don't.
    Purchase an external hard drive and use the backup software that comes with it to backup files from your computer.
    Buy TouchCopy and install it on your new computer, connect your old iPod and transfer your songs to your computer.

  • One laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    My first laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • When I try to download anything from iTunes or the app store on my iPod touch, my sister's Apple ID comes up instead of my Apple ID. How can I get my iPod touch to ask for the password for my Apple ID rather that of my sister's.

    When I try to download anything from iTunes or the App Store on my iPod Touch, my sister's Apple ID pops up instead of mine. How can I get my iPod Touch to display my Apple ID and ask for my password rather than display my sister's Apple ID?

    You can try to tell the iPod to use yours:
    1. Tap Settings
    2. Navigate to "iTunes & App Store"
    3. Tap Apple ID:
    4. Tap "Sign Out"
    5. Sign in to your account.

  • How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    Start Here:
    http://www.apple.com/support/ipodtouch/assistant/itunes/
    And See Here:
    http://www.apple.com/support/ipodtouch/

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How can I get my Ipod to play on someone elses computer?

    How can I get my Ipod classic to play on someone elses computer.  Not my home computer where my library is stored?

    The simplest -- and safest way for both sides -- is to use the same sort of cable you use for the AUX port on your car -- an min-jack to min-jack cable. Plug it into the headphone plug on your iPod, and connect it to the Line-In on the friends computer. This eliminates any risk of your iPod being detected by iTunes on your friends computer and getting corrupted, and also elimates any risk of malware attempting to corrupt the iPod. If you are worried about battery, simply connect your iPod to an external charger when you do this.
    When I'm at work, I never connect my iPod to my work computer. I just use an external speaker. The iPod is only connected to its primary iTunes, and then I only update that iTunes when it is absolutely necessary.

Maybe you are looking for

  • How to stop concurrent programs from appearing in the SRS window ?

    Hi All, We have hundreds of custom concurrent programs registered under a custom application. Except for 3 hidden programs (which will be submitted internally from another concurrent program), all the others should appear in the SRS window. Therefore

  • DW crashes when editing PHP

    Any time I try to edit my dynamic pages, Dreamweaver keeps shutting down with the following error sig: Error Signature: AppName: dreamweaver.exe AppVer: 9.0.0.3481 ModName: dreamweaver.exe ModVer: 9.0.0.3481 Offset: 002dab57

  • Use of innerclasses

    pls let me know, exactly what is the use of inner classes. In which scenarios we need to implement innerclass.

  • The thing on the Sawtooth switchbox?

    Having trouble starting up a used Sawtooth I bought unless I press the PMU button first. New battery, good power supply I had the battery out for almost a day from the unpluged computer, put the battery back, pressed the PMU button and still nothing

  • PXI 7966 with NI 5752 digitizer overflow issue

    Hello, I am using NI 5752 with NI 7966 to write samples in FIFO from 16 channels at the speed of 50MHz by using timed loop. I am using 4 FIFOs each size 65355 and writing 4 samples into each FIFO at every loop execution and write the total of 2000000