How can i get my Nano to play through all albums/playlists automatically?

I like to walk for an hour/ hour and a half each day, and would love to know if somehow i can start playing 1 album or playlist, and have the Nano automatically play through the remaining albums/playlists so i don't have to manually start playing an album again each time one finishes???
I have only had my Nano 3 days, so forgive me if this is a simple question.
Thanks!!
iBook G3   Mac OS X (10.4.3)  

Found my answer in a previous post.
Thanks.

Similar Messages

  • I can't get my shuffle to play through all my playlists. Once I pick a playlist, it will play that one all  the way through and start over instead of playing the next one.

    How do I get my shuffle to play all my playlists through their entirety?  I will select one and it will play all the way through and start over.  I want it to finish that one and move to the next playlist, and so on.

    I think that's the way it's supposed to work. 
    You should just create another "merged" playlist that has ALL the songs from those playlists, with songs in the order you want them played, then use the play in order setting on the shuffle.
    It won't take up any more space on the shuffle, because all of the songs will already be on the shuffle due to the separate playlists.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • How can I get my iPod to play through the 30 pin connector?

    I bought an 30 pin to 8 pin adapter. I plugged it into my iPod and plugged it into the sound system (new Yamaha MCR -049). The scene says "unknown iPod" and will not play music (it comtinues to play through the iPod's speaker) and it does not indicate that the iPod is charging. What am I doing wrong?

    Is a lightning adapter the same as 8 pin ? The manufacurer says this stereo says this only works with iPod 5 (mine is) and the only way to connect is an adapter. I bought an after market brand instead of Apple branded.  I think I have a bad adapter. I'll buy a 39 pin to lightning adapter. I think that's the only way I can figure put if the dock works.

  • How can i get my iphone to play through the speaker in my car

    i have a wire that go's into the headphonething on the iphone
    then the other end go's into the car put it plays through the iphone speaker do i need to buy a different wire or something plz help
    by the way it work with my ipod

    Is the jack not fitting into the top of the iPhone?
    If so then you would need this adapter for it to fit properly.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=3DB 4EB78&fnode=home/shopiphone/iphone_accessories/cablesdocks&nplm=TN546LL/A

  • How can I get my iPod to play noise when it says my headphones are in but they arnt and I can't get it to play music with out my headphones in ?

    How can I get my sound to play my iPod says my headphones are in all the time and they arnt so it will only play sound when my headphones are in

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem..
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • How can you get 2 videos to play simutenously together?

    How can you get 2 videos to play simutenously together so both are playing side by side on screen at the same time? 

    Welcome to the forum.
    As Steve observes, what you are talking about is called "PiP," or Picture in Picture.
    He has given you the basics of creating a "split-screen" PiP, and that should be exactly what you wish to do.
    For more detail, plus more ways to do PiP, I strongly recommend his book, Cool Tricks & Hot Tips for Adobe Premiere Elements 11, from Muvipix. He has an entire chapter (Chapter 10) on PiP, and many of its uses, with detailed instructions on the settings to accomplish it. Just that one chapter is worth the price of the book.
    Good luck, and happy editing,
    Hunt

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • I downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?

    i downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?

    hi philly, thanks for getting back to me, especially on such a busy day.
    I don't think that's quite the issue though. I bought an album and it appears in 'my purchases' within the itunes app. Yet, in order to listen to the music, i must use the 'music' app and in this application, there are only three tracks displayed at any one time from my downloaded album.
    I can 'download all' from the 'my purchases' section but that still doesn't help, it just keeps the last three tracks downloaded in the music app.
    I have the 'icloud' enabled and wondered if it had anything to do with that.
    i have successfully downloaded another full album totally into the music app, but this first album is causing me problems.

  • How can I get the Airport Express to handle all the PPPoE stuff?

    Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
    We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
    What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
    I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
    How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
    Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

    Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
    Direct ethernet cable connection to my Macbook works fine.
    When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
    But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
    thanks
    Paul

  • How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

    How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

    Setup iCloud on all the devices and computers as described here: http://www.apple.com/icloud/setup/

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • How can I get the digital booklet included with the albums I am purchasing from iTunes directly on my iPad?

    How can I get the digital booklet included with the albums I am purchasing from iTunes directly on my iPad?  My MacBook died about 6 months ago, so now I just have an iPhone and iPad.  I would like to be able to see the Digital Booklet in my iPad when I download the album.  I do not have any other computer to download the booklet to and sync to my iPad.

    Apparently, you have to download the booklet to iTunes on a computer first, fiddle with the file type, then sync it as a book to your iPad. See http://support.apple.com/kb/HT4194 for details.

  • HT4124 How do I get my volume to play through the tv, when the Hdmi is plugged in?

    How do I get the volume to play through the TV and not my MacBook Pro, when a HDMI cable is being used?

    I don't think the Mac routes sound through HDMI, or else it's a TV issue.
    Use a stereo mini to RCA breakout cable.

Maybe you are looking for

  • How do I assign the play button on my remote control

    I made a simple menu with two buttons and it activates the buttons when I select using arrows and push enter, but not when I push play. I would like to be able to start the movie by pushing play as well. Thank you to anyone who can help me! Juli Kang

  • Screen Saver not working & Phone Restarting unexpe...

    Hi,      Never expected this problem on my Nokia 701 after updating to nokia belle fp1. My phone restarts unexpectedly even though i m not using it and also while using some applications. Also my screen saver does not work whatever i do the screen sa

  • Setting Icon Image in JDialog

    The following code sets the top-left icon of a JDialog box.But when I uncomment the line 'setResizable(false)' the Icon is not seen. So how do run the code if I want the JDialog box not Resizable ? Code is as follows..................................

  • Activity Types for a Work Center

    Dear Experts, I have done KL01 and KP26 transactions. That is I ahve defined the activity and assignes a cost conter to it. Still, when I am trying to enter the activity type in costing tab while creating the work center, the system throws an error a

  • Previously downloaded albums and playlists wont play

    Previously downloaded albums and playlists wont play.  The only music that will play are those listed as "Recently Added".  When I attempt to play any other music, I get the error message "The song could not be used because the original file could no