How can I get my Panasonic 3D TV and BluRay Player to go online using Time Capsule?

So I've extended my home network using my Time Capsule so that I have a stronger signal in different parts of my home. My Time Capsule isn't hard wired to the modem, but I'm now getting a stronger signal in parts of my house that never had good signal strength. That being said, I've set up my Time Capsule in my living room right next to my home theater system. I thought since Time Capsule is connected to the internet, I would be able to connect my 3D TV and BluRay player (both Panasonic) to it. I did wire connect the tv and BD player to the Time Capsule, but no connection is happening between the tv and BD player and net. Can anyone help me out a bit? Does the Time Capsule need to be hard wired to the modem for this to work?

Let's check your settings first on the Time Capsule.
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
What setting do you see for Wireless Mode?
What type of router (make / model number) is providing the "main" wireless network that the Time Capsule is trying to "extend"?

Similar Messages

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

My apple tv 2 says I can't stream music from my iTunes library on my iMac without settng up iTunes Match. I don't want to set up iTunes match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to A

When I click on the Music tab on my Apple TV 2, a message tells me I have to set up iTunes Match to stream music from my iTunes library on my iMac. I don't want to set up and pay for iTunes Match. How can I get back to the pre-Match system which let me just use home sharing to stream music from computer to Aple TV

Ditto.
You need to look for your itunes library under Computers and select it, then music.
Music column is for web based content not local content, just to confuse everyone.
AC

My ipod reset itself it would not let me log into my old itunes account so I made a new one how can I get to all my music and stuff.

My ipod reset itself it would not let me log into my old itunes account so I made a new one how can I get to all my music and stuff.

To recovery yoyr existing account:
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

I have an ipod nano 4th generation. I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano. How can I get rid of his shuffle and re-add my nano

have an ipod nano 4th generation. I let my grandson, who has a shuffle, connect his shuffle to my computer and now my itunes recognizes his shuffle and not my nano. How can I get rid of his shuffle and re-add my nano?

Hi lundjj,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful if your iPod nano does not appear in iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
This information can also help if you are using multiple devices with a computer:
iPod for Windows: Connecting multiple iPod devices to iTunes
http://support.apple.com/kb/ht3622
Although FireWire and USB connections will allow multiple iPod devices to be connected to the computer at the same time, iTunes for Windows works best with only one iPod connected at a time. If you plan to connect multiple iPod devices to the same computer, eject any iPod devices that you are not using from iTunes.
All the best,
Jeremy

How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
Read this article before you do anything else
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

How can i get best practice for SD and MM

Please, can any body tell me how can i get best practices for SD and MM for functional approach?
Thanks
Utpal

Hello Utpal,
I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
You will not find readymade document, you need to add this as per your requirement.
btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
New to Materials Management / Warehouse Management?
Hope this helps.
Regards
Arif Mansuri

Mac platform. I have the Creative Suite. I need to reinstall the app. How can I get rid of the app and it's extensions to reinstall it?

Mac platform. I have the Creative Suite. I need to reinstall the app. How can I get rid of the app and it's extensions to reinstall it?

Are you SURE you need to reinstall? Often people believe this but it rarely solves anything. Does a message say you must?

How can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

how can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

Plug the phone and iPad into your computer and sync them.

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

How can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?

how can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?
I liked to turn off running programs without a window that I was no longer using
thanks.
Best I can do now is to open the "force quit" window and click on programs I want to stop and then send each one a "command-Q" and then repeat as necessary
Jeff

Command + Tab is what you are after i think

How can i get difference in base plan and actual/current plan for a project

Hi PS Experts,
How can i get difference in base plan and actual plan .
For example-
Project1 is created for 10 days (start and end date difference).
Now in between -project is extended/changed for 12 days .
What is the way to get 2 days as a difference in base plan and current plan.
Thanks
Suraj prakash

Hi Suraj,
You can follow a convention that -
(1) Forecast Start/Finish dates: Used only for Primary planning, once initial planning is done you should not change these dates.
Now, you will copy the same dates in Basic Start/Finish dates also.
(2) Basic Start/Finish dates: Whatever changes are done after the initial planning, you will make the changes only in Basic Start/Finish dates.
So, in Project Planning board, if you enable Forecast and Basic dates with different color coding, you can clearly see the variation in the Project schedule.
Hope this helps.

How can I get my graph to plot vs. my data points instead of vs. time?

how can I get my graph to plot vs. my data points instead of vs. time?

Maybe you could exaplin in a few more words what "my data" is. Are the values equally or randomly spaced?
If they are equally spaced, just adjust offset and multiplier, and axis label.
If they are randomly spaced you are probably looking for an X-Y graph. Check the shipping examples.
LabVIEW Champion . Do more with less code and in less time .

How can I get my Panasonic 3D TV and BluRay Player to go online using Time Capsule?

Similar Messages

Maybe you are looking for