How can i get my phone numbers
i lost my phone device and i want to get my phone numbers
Do you mean you want to recover your Contacts? The only way to do that would be if you have them saved somewhere - do you use iCloud sync, or do you regularly sync them to your computer? If not, they are gone.
Similar Messages
-
How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.
-
How do I get my phone numbers from my IPhone 4 to IPhone 4S
how do I get my phone numbers from my IPhone 4 to my new IPhone 4S?
Contacts are designed to be synced with a supported address book app on your computer, or over the air with an email account that supports it. Not a good idea to depend on an iPhone or any cell phone alone for contacts which can be lost or stolen or damaged beyond repair by being dropped, etc.
If you are syncing contacts with a supported address book app on your computer, you select the same under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
If you are syncing contacts over the air with an email account that supports it, create the account with the Mail app on your new iPhone and turn Contacts on for over the air syncing with the account settings on the iPhone.
Contacts are included with the iPhone's backup. If your iPhone is being backed up with iTunes on your computer, the first time you connect a new iPhone to iTunes on a computer being synced with another iPhone, you are prompted to transfer the backup for the other iPhone or set up the new iPhone as a new iPhone. -
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?
As AT&T has not officially unlocked your phone it must have been hacked to use another carrier. So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.
-
How can I get another phone to print on my printer
how can I get another phone to print on my printer
Which printer?
Which Phone?
What connection type?
Please add some more details and then we will be able to assist you.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How can I get my phone back on - Its showing disabled owing to putting in wrong passcode. I recently upgraded to 7 software - before that I didnt have a locked password. Can I disable 7 software.
Hi chilli01,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Cheers,
- Judy -
How do i get my phone numbers back after i restored phone back to new?
how do i get my phone numbers back after i restored phone back to new?
Where were you syncing the contacts to, iCloud, the computer and Outlook, an email account? That is where you get them back from.
-
Hi all, I have bought a second hand iphone 5s and have found it is still activated to the last user... i can't get hold of them anymore, how can i get the phone activated in my name?
If iOs 7 is installed on that iPhone, you will not be able to activate it without
the requested information. It is called Activation Lock and is a security
feature built into iOS 7. There is no workaround. -
How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon? The Apple OS X Mavericks blue & green desktop is totally gone. HELP!
Here's a screenshot of my desktop, as of a few minutes ago: http://lewgoodman.com/desktop.tiff
-
How can I get the phone to recognize mini SD Card?
I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported. I purchased another SD Card and installed it however the phone does not recognize that I have an SD card. When I try and save music or pics to the card the phone says I have removed the storage. How can I get the phone to recognize the card storage?
First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it. If you pull the card out of the phone select Unmount first. You can also try formatting the card from the same settings menu. If these two things do not work, then either the card is defective or the card hardware slot is defective.
-
How can i get my phone passcode
how can i get my phone pass code
You mean the passcode that you selected to protect your iphone?
You would get it from your head.
If you have forgotten it, then you will have to restore. -
How can I get two missing numbers on a iTunes card
How can I get two missing numbers on a iTunes card
"Get help",just below the form space where I entered the code. Once I clicked "Get Help", it added another line to the form where I could enter THE NUMBER ON THE BOTTOM LEFT CORNER on the back of the card. I entered as much of the I scratch-off code I could read, along with the serial number.
-
ok i was re storing my i 4 something went wrong on the process now i have my phone showing the usb cable icon with an arrow pinting to i tuns icon ! how can i get my phone to go back to normal ???
Put the device in DFU mode (Google it) and restore.
-
How can I get contacts into Numbers spreadsheet
How can I get my contacts into a Numbers spreadsheet, please help since the OS X mavericks upgrade I cant drag them and I dont know how to get them into the spreadsheet now can anyone help
And here's a way to get some actual information from Contacts into Numbers 3.0.
1. Copy/paste the script below into AppleScript Editor.
2. Select the cards in Contacts that you want.
3. Click the green run button in AppleScript Editor.
4. Click a cell in Numbers and command-v to paste the data in.
That should result in something like this:
Here is the script:
--Places tab-separated Contacts data on the system clipboard for pasting into a table
--usage: select one or more contacts in Contacts, run, select a cell in a table and paste
tell application "Contacts"
set {tsvData, contacts} to {"", selection}
if selection is not {} then
set tsvData to "Name" & tab & "Phones" & tab & "Street" & tab & "City" & tab & "Zip" & tab & "Emails" & return --header row
repeat with thisPerson in contacts
set {thisPhone, thisEmail} to {"", ""}
set {thisName, thisID} to {name, id} of thisPerson
set {thisStreet, thisCity, thisZip} to {street, city, zip} of the first address of thisPerson
set phoneProperties to properties of phones of thisPerson
repeat with j from 1 to (count of phoneProperties)
set thisPhone to thisPhone & value of item j of phoneProperties & " "
end repeat
set emailProperties to properties of emails of thisPerson
repeat with j from 1 to (count of emailProperties)
set thisEmail to thisEmail & value of item j of emailProperties & " "
end repeat
set tsvData to tsvData & thisName & tab & thisPhone & tab & thisStreet & tab & thisCity & tab & thisZip & tab & thisEmail & return
end repeat
set the clipboard to text 1 thru -2 of tsvData -- remove trailing return
tell application "System Events" to display dialog "Click in cell and <command-v>" buttons {"OK"} default button 1
else
tell application "System Events" to display dialog "Select at least one card in Contacts and run again" buttons {"OK"} default button 1
end if
end tell
This is not as nice as the old vcard drag and drop import. It's a simple example and probably needs some customizing because there are so many different ways people store information in Contacts. But this approach can meet most needs, if it's not convenient to leave the data in Contacts and link to it.
SG
Maybe you are looking for
-
I just got a new mac mini and want to put my own SSD, but it came with no cd's. How do i upgrade to my new HD>?
-
Trailing space issue in Unix File
Hi All, I am facing an issue with the trailing space in Unix file content. When the file is being created in Unix server the trailing space is getting trimmed automatically. As per the requirement,this space should be retained in the Unix file as it
-
Copy / Paste Styles between objects?
Can you copy/paste styles between different objects in Motion 5? I know I can save a Style as a name and then select it from the style list. It would be great to just copy a style and then select another object and paste. Can you do this? Thanks! Sco
-
Urgent ! problem with ADT or OCI mode
Hi to all I'm working with Oracle developer 9i. Developing a report I tried to compile a trigger (in section 'before report') in which I declare an array that is a type returned by a function pl/sql that is into a package on server oracle 8.1.7. I ca
-
i am trying to purchase something from itunes store and am getting an error has occured (-1202) try again later what do i do?