How can I get my printer to work in FireFox?

my printer will not work in Firefox. I have it listed as my default printer, but it still will not print.

I am not sure I understand ''it still will not print. ''
If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Similar Messages

How can I get my printer to work after a Yosemite update?

How can I get my printer to work after a Yosemite update?

Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W.

How can I get interactive websites to work with Firefox?

In the last week many of the interactive websites I've been using for years suddenly stopped working properly. However they do work with Internet Explorer. How can I get them to work again with Firefox?

In what way are those websites not working?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I get Netflix instant watch working in Firefox 6.0?

Recently updated to Firefox 6 and Netflix instant watch won't work ... I re-installed silverlight but that didn't help. I can't find a way to rollback to Firefox 5.0, how can i fix this issue?

'''SOLUTION'''
The problem with Netflix streaming with the FireFox 6.0 version is that the Netflix service '''refuses '''version 6.0 because they are A) unwilling to license it '''''or''''' B) too lazy or stupid to add the new version to their User Agent acceptance scheme. C) under contract to MICROSOFT to use Silverlight and part of Silverlight's DRM is what Browser versions are acceptable and Microsoft is taking their sweet time updating Silverlight to push I.E. on people and if you have Beta 5 Silverlight forget that -------Until Netflix accepts Firefox 6.0 as a legitimate Netflix browser '''you may do what I have done to get Firefox 6.0 streaming at Netflix.'''
1) Open Firefox 6.0 and enter "www.whatsmyua.com" without quotations in the address bar and highlight and copy your present User Agent string from the top of that page when you get there.
2) Type "ABOUT:CONFIG" without quotations in the Firefox address bar and hit enter then answer the You might destroy the world question with Alright I'm ready.
3) Right click on the background of the Config screen and then highlight to click on the "New String" choice... When the box comes up enter "general.useragent.override" without quotations and hit return
4) When another box appears paste in your current User Agent string you copied in step 1) BEFORE hitting enter place your cursor on your paste and right arrow to the end of the line. EDIT/REPLACE "6.0" with "5.0.1" without the quotations. Enter your change and close out the Config page.
5) Repeat step 1) to make sure the User Agent string is now spoofing your browser as version 5.0.1
6) Go to Netflix and watch movies (Make sure Silverlight and the Firefox Java are on). If it was working before the upgrade, everything should now work again streaming Netflix with Firefox 6.0.
7) Call Netflix and tell them Dave sent you to see if they're stupid or just lazy and to quit spreading the B.S. that Firefox 6.0 ain't workin when we know it's Netflix (1-866-636-3076)

How can i get my wireless to work on my printer hp officejet pro 8600

how can i get my wireless to work on my printer hp officejet pro 8600

You'll get faster help w/this question by posting it in the Wireless forum...here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
I am an HP employee.

HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter. How do I resolve this?

I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
The phone gets WIFI from AT&T. My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router.
That must be the problem. How do I resolve that?

For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
Can you connect your iPhone to the Netgear router WiFi?

Can't get my printer to work

Hi, I have just bought an apple iMac and I can't get my printer to work. It is a Sansung ML laser 4500. I tried to download a driver on thee Samsung website but can't get a driver. Please advise how I can get this printer to work as I don't want to buy another printer.
Please help.
Michael

Samsung does not have an OS X driver for their 4500 series printers. You can check in Print & Fax to see if a driver is provided in OS X, but if Samsung doesn't make a driver for OS X then it's unlikely you will find one that works. Of course you can try the Generic driver, but no guarantee it will work. If it does only some printer functions will be supported, if any.

How can I get my iMac to work with scanners?

How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

My Epson is able to do scans using Image Capture without any problems at all.
Allan

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. How can I get my scanner to work?

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1. How can I get my scanner to work?

Check here to see if there is an updated driver available for it:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I recently transferred my ipnone service from at&t to another carrier the phone worked fine until i tried to up it with itunes i now have a frozen itunes logo and a plug on the screens my phone is a iphone 3g how can i get my phone to work again?

my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?

As AT&T has not officially unlocked your phone it must have been hacked to use another carrier. So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

You did install the latest iTunes (10.5) right? If the problem was that iTunes does not see the iPod try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Hi I have just upgraded my computer to Mac OSX 10.6.7 now I cant open my FCE 4. Message reads, Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Thanks, just so I know we are talking about the same items please let me know - When you say "run Prokit" do you mean downloaded? Which I did. I dont have Prokit 4.0.1 if you are referring to that, do I need this first? Please explain what application name I am looking for if other than Prokit which is sitting in my "download folder" do I need to manually put it into the apps folder? Sorry if the questions are layman but this area is not a very strong point for me. Thanks for your help so far.

HT1338 How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

Hello, Cubby21.
Thank you for using Apple Support Communities.
Here are the best resources for troubleshooting issues with Message.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Jason H.

How can I get my printer to work in FireFox?

Similar Messages

Maybe you are looking for