How can i get my tablet to print things

Can anyone walk me through getting my printer to print things from my tablet

The page here indicates the Deskjet 3050a is compatible with Airprint.  The page here may help in configuring the printer.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

    I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

    in the iPhoto preferences  change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
    LN

  • How can I get another phone to print on my printer

    how can I get another phone to print on my printer

    Which printer?
    Which Phone?
    What connection type?
    Please add some more details and then we will be able to assist you.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can i get my ipad to print to my HP deskjet f4580

    How can i get my ipad to print to a HP deskjet F4580

    Hi there, probably the easiest way is to install the HP ePrint mobile print app on the iPad. Take a look at the information here to find out more about how this solution works and to find a download link to the App store in iTunes http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?ap...
    Feel free to post back if you're having any problems. All the best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

    How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

    Im not exactly sure what you mean by color profile..can you specify? So i have a dslr canon and take great portraits and tune them to exactly how I want them to look, they dont print at all like the colors presented on my screen. If i antique them then they print yellowish. Ive even tried printing them at walgreens because i thought it was my new printer. Hp hasnt let me doown til now. Is ot a printer setting? Ive never had this kind of printing issue.

  • How can I get my Epson NX625 printer back on line?

    How can I get my Epson NX625 printer back on line?

    The solution to your issue is in this thread:https://discussions.apple.com/thread/5233149
    Specifically this post:
    "astonishingly as it may seem, epson support sent me this 6 hours after i contacted them-
    Subject
    when attempting to print the epson print program shows "stopped - 'filter' faile
    Discussion Thread
    Response (Rodolfo M)
    08/16/2013 03:21 PM
    Dear Robert,
    Thank you for contacting Epson.
    I am sorry to hear that you are experiencing difficulties with your Epson Artisan 710 because of rastertoescpII error. To resolve this issue, please try the following steps below:
    Power off the printer.
    From the , select System Preferences.
    Choose Sharing.
    Check if "Computer Name" field is empty or not.
    If the "Computer Name" is empty enter a name for the computer.
    Restart the Computer.
    Test if you are able to print.
    We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
    If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. Support Site and we will respond in a timely manner.
    Thank you again for contacting Epson.
    Jun M."

  • How can I get apple to email me things like updates and stuff like that on email?

    How can I get apple to email me things like updates and stuff like that on email?

    You can't.

  • How can I get my 5524 to print 7x5 instead of 6x4 on 7x5 photo paper?

    How can I get my photosmart 5524 to print proper size on 7x5 photo paper.  It always comes out 6x4?

    newbynorm,
    According to the print spec:
    http://goo.gl/50mSJ
    5x7 is supported. The steps vary somewhat based on your operating system; what operating system are you running?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How can I get my ipad to print to my printer on the network

    I can not get my Ipad to print to my network printer.  The printer is an HP6500a plus officejet

    You can use HP ePrint, Apple's AirPrint, or HP ePrint Home & Biz mobile app when it comes to the 6500A Plus eAIO.
    Here are some articles pertaining to usage of these apps/methods of wireless printing that may help!
    General how to for all methods:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
    ePrint mobile driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ds-104730- 1&cc=us&dlc=en&lc=en&product=4083977&tmp_track_link=ot_search
    Getting started with eprint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641663&cc=us&dlc=en&lc=en &product=4083977&tmp_track_link=ot_search
    You want to make sure your printer has the latest firmware installed to support airprint. You can find that software by navigating your control panel on the printer to updates.
    Once this has been performed it should be viewable as an Airprint compatible device through the ipad.
    You can also download the ePrint Home & Biz app for free from the apple catalogue and use that method as well with much the same result, as well as online management capabilities on the printer.
    Hope this helps!
    I work with HP.

  • How Can I Get my HP1115 to Print with One Cartridge?

    I have an HP Photosmart 1115.
    The color cartridge ran out so I tossed it in hopes of getting a new one. Then I saw the prices. I CANNOT CANNOT CANNOT pay $40 freaking bucks for a cartridge. That is ridiculous. I do not, in any way, shape or form have that kind of money. I just need to print resumes, which require only black ink.
    How do I get my stupid printer to work? I'm about ready to fling it out the window and just write things down old school with a pen and notebook paper. I can afford that.
    -Signed, Broke and Irritated.
    PS. If anyone knows where I can find an HP 78 cartridge for around $20 or less that would work too.

    The short answer is that you cannot print on the Photosmart 1115 without both a color and black cartridge installed.  You do not need ink in the #78 cartridge, but it does need to pass an electrical check.  You may be able to find expired #78 cartridges on eBay or some similar.  Old cartridges will still work in the printer, althoug depending on how they were stored they may not print one or more colors, usually cyan or yellow fail first.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How can I get Test Stand to print failues only?

    Rather than getting a large report file with hundreds of passes and only one failure, how do I configure Test Stand to only print the failures to the report?

    Hi,
    the engine callbacks are simply a sequence that gets called when a particular thing happens (i.e. Post Step).
    There's three types
    SequenceFile (for steps that execute in that sequence file whether it's a client sequence file or a process model)
    ProcessModel (for steps that execute in the client sequence file run under this process model, but NOT the steps in the ProcessModel)
    Station (for all steps on that installation - found in the StationCallbacks.seq sequencefile)
    If the engine callback appears in more than one of the three places, then the lowest one (seq file->proc model->station listed lowest to highest)is used.
    In your case, you could use any of them depending on your architecture.
    Personally, r
    emoving from the resultlist is easier than working out whether to add to it, but that gets tricky when you have steps which loop.
    If you decide to make up your own add, then the PostStepFailure is the callback sequence to use (go to edit->sequencefilecallbacks). You'll have to add a new element to the resultlist, and start fleshing it out with the result container of the step (which you still have access to as a parameter) plus the TS container.
    This would go into the Runstate.Caller.Locals.ResultList[x]
    Also, don't forget to disable the result collection on all the steps in the test sequence, plus all the ones in your poststepfailure callback, since you're doing your own.
    I'm attaching what I've done so far as an example - not quite finished, but it's done the TS container. Just now need to do the actual result container.
    I'll keep working on it but for now you can see what I'm getting at.
    Hope that gives you a kick start with the callbacks bit
    Sacha Emery
    National Instrumen
    ts (UK)
    // it takes almost no time to rate an answer
    Attachments:
    collect_only_failures.seq ‏31 KB

  • How can I get my email to print 8"x11"? it now prints 4"x6". other documents print 8"x11"

    My documents and on-line documents print correctly at 8"x11". My email prints 4"x6". How do I get email to print to the correct size?

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

  • How can I get my files to print? when i go to the print page they show up a black page .

    I seem to be having trouble getting downlaoded pdfs to print off. I can view them and they look ok but then i go to the print setup and all that shows is a black page. If i try to open the saved file from the desktop it say the file is damaged or corrupt . this doesnt always happen. sometimes it's fine, so idont know what is wrong, the file , my printer , adobe reader?? can anyone help?

    HI thanks for that Pat, but doesn't seemed to have fixed it . I dont have that option on my print set up.
    this is message i get when i try to open the file.     Adobe Reader could not open 'calleen-2014-a4-form.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    when i am viewing the document online i dont have any access to adobe reader menus or bar at the top, then i go to print from safari browser and then the page in the print box is black , no image. Any other suggestions . thanks

  • How can I get PSE 13 to print correct size and center photo?

    I have MAC, Artisan 1430 printer, PSE 13.  Recently upgraded from PSE 10 (never had a problem printing).  I input the size paper, size image, paper type, etc. (as I would with PSE 10) and the same parameters for printer, but image does not print correct size and is not centered.

    Hello Surendra,
    Thank you for the clear explanation of the duplicate detection and how adding Metadata affects duplicate detection. But I am still wondering if there isn't a more useful way to handle this. If I am setting a metadata template for the APD, I want all my images to contain that information. And that makes duplicate detection non-functional for me. How can I workaround that?
    It seems the duplicate detection process should take the metadata template into consideration before determining if the image is duplicate. Of course that may be other undesired side effects, such as a performance hit, etc.
    Also, I have seen behaviors that seems to not follow this logic and seem to indicate that the duplicate process might not be operating as I would expect.
    1. If I rotate an image in the Organizer, and set the Rotate JPEGs Using Orientation Metadata is unchecked (to rotate the image on disk), the import process still recognizes the image as a duplicate. It would be nice for me if there was some documentation on what triggers an image to be non-duplicate.
    2. If I select two images and in the information pane, click Edit IPTC information and add IPTC data, the APD import process still is able to determine the images are a duplicate. From my perspective, there is no difference in the data displayed if I add the IPTC data via the metadata template or Edit ITPC information cmd. Why does duplicate detection work in one case and not the other?
    3. If all the images are duplicates, then APD displays ALL images on the media, but unselected. I guess it's saying no new images found, which do you want to import again.

  • How can i get my computer to print with a wireless HP envy4502 using an ATT sierra hotspot

    I have a HP envy 4502 wireless printer that works find printing from my iphone. I use an ATT Sierra hotspot that is connected via usp to my computer to access the internet form it. My problem is I would like to print from my computer without having to connect the hotspot via usb and connect wireless via the hotspot. How do I connect the printer. Do i need a cable to connect it to computer or do I need a router to connect the computer to the printer wireless. I am confused as to what needs to be done so my hotspot doesnot have to be physically connected to print.

    Hi kragan,
    I understand you would like to print from your computer to your Envy 4502.
    I can help you with this. You should be able to run the wireless wizard on the front screen of the printer and connect it to your Hotspot wirelessly. If you put your computer on the same network, both devices can communicate withe one another. HP Printers are designed to work with 802.11 WiFi networks, thus connecting to the Hotspot may not work.
    This particular model does have the feature called Wireless Direct (WD). HP wireless direct is a new feature that allows your Wi-Fi capable devices (for example: smart phones, tablets, or computers) to make a wireless network connection directly to your printer without using a wireless router or access point. You connect to your printer's HP wireless direct signal the same way you connect your Wi-Fi capable device to a new wireless network or hotspot. - Source
    Please use the instructions in the link I sourced to set the printer up using wireless direct. Simply open the link and click on 'How to connect to HP wireless direct'. 
    Once the WD is enabled, open your network settings on your computer and choose the printer network, it will look like a variation of the printer name.
    If you would like clarification or have any questions I would be happy to help.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for