How can i get my wifi to turn on when it's greyed out?

My iPhone has been playing up since the iOS5.1.1 update, my wifi has greyed out and wont let me turn my wifi on or off, i updated to iOS6 thinking it will cure it and its exactly the same, anybody know what to do?

You could be having a problem with the radio for WiFi. I'd suggest that you start by rebooting the phone.
Hold both the SLEEP button for about 5 seconds until a red SWIPE TO SHUT DOWN comes up. Go ahead and do so. After it powers off, wait about 5 seconds then hold the SLEEP button again to power on the phone.
If this doesn't help I would recommend you make an appointment with a Genius at your local Apple store.
If this helped at all please consider marking the problem solved or "like" my posts so that I may get more points for my profile.
Thank you,
Fred

Similar Messages

How can I get my wifi to turn on. It remains greyed out

How do I get my wifi to turn on? It remains greyed out. I have tried Network reset. Can anybody help please?

Hello POLLYMER,
Thanks for the question. I understand that your Wi-Fi option on an iPhone 4S is greyed out. The following article explains this issue and potential resolution:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Follow these steps to resolve the issue:
1. Verify that airplane mode is off by tapping Settings > Airplane Mode.
2. Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
3. Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
4. If your issue is still unresolved, perform a software restore in iTunes.
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
Thanks,
Matt M.

HOW CAN I GET MY WIFI TO WORK

HOW CAN I GET MY WIFI ACTIVE AND WORKING

Try reading this: Wi-Fi common issues
and this: iOS: Troubleshooting Wi-Fi networks and connections

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

How can I get a small window to open when a link is clicked (AS2)

Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
I havnt done this before
Thanks
Manoj

HELLO NED,
I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
THIS IS MY QUESTION....."ABOUT DATAGRID AS3
Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
var url: String = "xmls/rests.xml";
var req:URLRequest = new URLRequest(url);
var myLoader:URLLoader = new URLLoader();
myLoader.addEventListener(Event.COMPLETE, completeHandler);
myLoader.load(req);
function completHandler(event:Event):void {
       var myLoader:URLLoader = event.currentTarget as URLLoader;
       var xmlDP:XML = new XML (myLoader.data);
       XML.ignoreWhitespace = true;
       dp = new DataProvider(xmlDP);
       dp = sortOn("name", Array.CASEINSENSITIVE);
       dDg.dataProvider = dp;
       aDg.addEventListener(Event.CHANGE, changeHandler);
       function changeHandler(event:Event): void {
            var thisItem:Object = eve.target.selectedItem;
            descripTa.text = thisItem.description;
            aUI.source = (thisItem.image);
            preloader_mc.visible = true;
My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
Thanks in advance Ned
Joselyn             .................."
THANKS AGAIN NED
REGARDS
JOSELYN
Date: Thu, 13 Oct 2011 07:49:02 -0600
From: [email protected]
To: [email protected]
Subject: How can I get a small window to open when a link is clicked (AS2)
Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
Look at the Methods section and choose whichever suits your needs, the first one listed does not.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I get the cd that was provided when I bought the book dummies for bass guitar to play on my ipad thanks

How can I get the cd that was provided when I bought the book bass guitar for dummies from iTunes to play on my ipad.probably someone should provide me with a file or download?thanks

You need to import the CD into iTunes on your computer and then sync the tracks to your iPad.
Regards.

How can I get firefox to shut down automatically when not in use for an hour

How can I get firefox to shut down automatically when not in use for an hour

Sorry, there is no feature for that built into Firefox, and I haven't seen an add-on to add that feature to Firefox.

How can I get rid of a 1202 error when downloading products from itunes

How can I get rid of an 1202 error when downloading products from itunes?

You have probably downloaded the Norton program which is one of the least desirable helpmates you can invite in.
Read this thread and follow the suggestions by Thomas R, one of our gurus in this field.
https://discussions.apple.com/message/20005609#20005609

How can I get my LT monitor to sleep when I have an external display connected, If I close the lid both displays go out

How can I get my LT display to sleep when I am using another external display, right now if I close the lid both of them go to sleep?

This is called Clamshell mode, to operate with the lid closed you need:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
Here are the details:
http://support.apple.com/kb/ht3131
Regards,
Captfred

How can I get my instructional text to display when I open the pdf?

I have some fields which I have set up which have help/instructions for completing the information required. This is a questionnaire. When I save it as a pdf, the instsructional text does not display. I would really appreciate if someone can tell me how to fix this.

Thanks for taking the time to respond to my query. The text does not display when I hover my mouse over it.
cheers Deborah Frow
From: Ajlan huda <[email protected]>
To: Deborah Frow <[email protected]>
Sent: Monday, 12 January 2015, 5:24
Subject: Reply marked as helpful on How can I get my instructional text to display when I open the pdf?
|
How can I get my instructional text to display when I open the pdf?
Ajlan huda marked SumitV's reply on How can I get my instructional text to display when I open the pdf? as helpful. View the full replyMarked as helpful:Hi Pacific Immigration, In Adobe Acrobat/ Adobe Reader there is no “?” shown for help, but if you mouse over the field for 1-2 seconds the Help text is shown.
Following How can I get my instructional text to display when I open the pdf? in these streams: Inbox
|

I can't get my Mac to turn on? Our power went out and it is now unresponsive.

I can't get my Mac to turn on? Our power went out and it is now unresponsive. I have tried the usual way to power it up but am not getting anything. Does it need to be reset?

Which Mac model?
When you say not getting anything - do you mean no sounds, beeps, etc?
It is possible that your Mac's motherboard or power supply are damaged.
Check this (read through the symptoms first):
http://support.apple.com/kb/HT3964

How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Cannu help me plz

How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz

Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self.

How can I get my editing changes to stay when uploading to Facebook?

How can I get my editing changes to stay when uploading to Facebook? For example, I have a picture that I have adjusted the sharpness,highlights and I De-noise it,however,when uploaded it to Facebook, the changes I made are not reflected in the picture.

exactly how are you uploading?
LN

How can I get roaming wifi on my ipad

How can I get my ipad to connect to wifi networks automatically when I'm out and about without having to put in a password to connect

That's not possible. Most wifi networks you can find are private and as such require a password to connect to them.
There's no such thing as roaming wifi.
If you need Internet you need to find a free wifi network, like those in coffee shops or libraries, you can use and even then some of those still require a password the first time you connect.
After the first connection the iPad will remember the network and its password, so it will attempt to connect automatically the next time it finds that particular network.

My ipod touch g2 was fulling charged last night and this morning the screen is completely black and I cant get it open and when I charge it nothing changes.how can i get my ipod to turn back on

my ipod touch g2 was fully charged last night and on. I think i fell asleep on it and this morning the screen is blank and I cant get it to power up. charged it again and still nothing. How can i get it to power back up

have you tried holding the power button and the home button for 30sec till you see the apple logo?

How can i get my wifi to turn on when it's greyed out?

Similar Messages

Maybe you are looking for