How can I get my wireless printer to join my wifi network?

Since HP Setup Assistant doesn't work with Mavericks, is there another way to get my wireless printer connected to my new wifi network? This printer (HP Officejet Pro 8000 A809) worked just fine with Mavericks on my old wifi network. But my DSL provider recently installed a new router, so I have a new wifi network, which  works just fine with everything else.
I was able to get my two Airport Expresses to join my new network, using Airport Utility, but I'm stumped as to how to get my printer to join the new network without the aid of HP Setup Assistant.
Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of wifi networks under Devices, as hpsetup. But that's as far as I got. Any help would be most approeciated.
This question was solved.
View Solution.

Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
Bruce's  instructions, for anyone else having the same issue:
- delete any previously set up printers
- scrub old hp software and update software to get the hp 2.8 drivers
- remove the usb cable from the printer if you have one connected
- reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
- print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
- got to sys prefs > network and change the mac wireless network to hpsetup
- go to the sys pref > print scan
- add the HP 8000 printer
- click on the options and supplies button and click on the Show Printer Webpage
- click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
- finish (this page may freeze up.  close the browser)
- go back to the sys prefs and change the wireless network back to your networt
- go to the printer and print out the wireless network test report (press network button and update button 2x).  Check that the SSID is your network
- go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
- try printing something to your printer.  It might take a little time the first print.

Similar Messages

  • How can i get my wireless to work on my printer hp officejet pro 8600

    how can i get my wireless to work on my printer hp officejet pro 8600

    You'll get faster help w/this question by posting it in the Wireless forum...here:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
    I am an HP employee.

  • Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

    I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

  • How can i add a wireless printer HP officejet 6310 all in one? is it possible

    How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

    Hi @millep 
    To answer your question, no the Officejet 2620 is not a wireless printer;
     - Source: Printer specifications
    As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
    I hope this answers your inquiry.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How can I get it to print output of inputstream?

    Please forgive me for running two similar thread but the other thread ahs strayed from primal concern of coding.
    Some help with the code please???
    I have set up an inputstream and outputstream to the "ftp process" of java.lang.Runtime I have sent the command "dir" to ftp.
    But How can I get it to print all the files etc of the "dir" sent to ftp process?
    Also I have just read that it is perhaps better to buffer the STREAMS.
    How do I do this for outputsteam? I think I have some clue to do for inputstream with bufferedreader?
    import java.lang.*;
    import java.io.*;
    public class RuntimeFTP{
    public static void main(String[] arg){
    Runtime rt = Runtime.getRuntime();
    String[] callAndArgs = { "ftp.exe", "jaguar.wmin.ac.uk" };
    Process process = null;
    OutputStream os = null;
    InputStream is = null;
    String login = "w0109699";
    String password = "11041976";
    String dircommand = "dir";
    byte[] barraylogin = login.getBytes();
    byte[] barraypassword = password.getBytes();
    byte[] barraydircommand = dircommand.getBytes();
    try
    process = rt.exec(callAndArgs);
    process.waitFor();
    System.out.println("Process exit code is: " + process.exitValue() );
    catch(IOException e)
    System.err.println("IOException starting process!");
    catch(InterruptedException e)
    System.out.println("Interrupted waiting for process!");
    try
    os = process.getOutputStream();
    os.write(barraylogin);
    os.write(barraypassword);
    os.write(barraydircommand);
    catch(IOException io)
    System.out.println("io exception write to outputstream");
    try
    is = process.getInputStream();
    while (is.read() != -1)
    How can I print the data to the user
    i.e all the data obtained from the "dir" command sent to ftp?????????
    catch(IOException io)
    System.out.println("io exception read fron inputstream");

    the above code does not work so I have abondaned it.
    I want to integrate an ftp program into a program I am working on. I have scoured the net for reuse able code and come across a "t or Linlyn ftp program" which claims is easily integrate able into larger applications.
    The problem is did does not seem to work and gives me errors. I would be grateful if someone could tell me why I am getting the error, here is the error:
    C:\My_DL_Dap\ftp in java>appletviewer t.java
    Warning: <applet> tag requires width attribute.
    java.security.AccessControlException: access denied (java.net.SocketPermission j
    aguar.wmin.ac.uk resolve)
    at java.security.AccessControlContext.checkPermission(AccessControlConte
    xt.java:270)
    at java.security.AccessController.checkPermission(AccessController.java:
    401)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
    at java.lang.SecurityManager.checkConnect(SecurityManager.java:1042)
    at java.net.InetAddress.getAllByName0(InetAddress.java:909)
    at java.net.InetAddress.getAllByName0(InetAddress.java:890)
    at java.net.InetAddress.getAllByName(InetAddress.java:884)
    at java.net.InetAddress.getByName(InetAddress.java:814)
    at java.net.InetSocketAddress.<init>(InetSocketAddress.java:109)
    at java.net.Socket.<init>(Socket.java:118)
    at Linlyn.ftpConnect(t.java:326)
    at Linlyn.<init>(t.java:236)
    at t.init(t.java:83)
    at sun.applet.AppletPanel.run(AppletPanel.java:341)
    at java.lang.Thread.run(Thread.java:536)
    I would also be grateful if someone could try out the program and tell me if it works for them, then I could determine if it is because ftp clients are being blocked by my server. The ftp program is very small, here is the url:
    http://www.afu.com/jdownload.html
    1) compile the code
    2) fill in everywhere it requests "your-server" "username" and "password"
    3) to run appletviewer t.java

  • PDF's print two sided.  How can I get them to print on single pages?

    PDF's print two sided.  There is no option shown.  How can I get thelm to print on single pages?

    1: Go into iTunes.
    2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
    3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
    4: Check that the disk number and track number is correct.  It should be automatic.
    4: Press OK.
    You should see it go into the album now.

  • How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open?

    How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open? Tried the coin...nope.  Tried a screw driver...nope! Even tried WD-40 - nope! Or does this mean it's now in the boat anchor pile!

    They are designed for coins... is this your first time changing the battery? Make sure you are twisting in the right direction and make sure you are pushing down on it and applying pressure at the same time you turn.

  • My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

    I have a current iMac with the latest OS update.
    My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits).  My  Airport Express, an early model, only requires a password of less than 10 characters.
    When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.”  That’s what got me here.
    My earlier MacBook runs OS 10.6.8. Its version of  Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion  what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
    I’m afraid of changing those settings for fear that I’l mess up the whole thing.
    How can I get my smart TV to connect to my network, ?

    Please check out the following AirPort User Tip on how to recover AirPort passwords.

  • How can I get all the print on my screen to be larger?

    How can I get all of the print on my screen to be larger?

    Thank you for helping me with the size of the print on my screen. The suggestion you made works well with the email font. I really wanted all the print on my computer to be larger. (Some of the print seems to be way too small.) Someone suggested I change the resolution settings. I did this, and changed it to 1024 X 640. That changed the size of the font on the toolbar at the top of the page, and that is what I really wanted, as well as all the other print on my screen. Nonetheless, I would like to thank you for your very helpful and prompt reply to my question.
    Sincerely,
    Wayne10

  • How can I get my wireless keyboard and my new magic mouse to enter info into a Christmas list app on iphone 3GS? Do I have to move to another room? I have bluetooth on in my iPhone.

    I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.

    You cannot connect the mouse.  This is not a feature of iphone
    You can learn about connecting a keyboard in the manual:
    iPhone User Guide (For iOS 5.0 Software)

  • How can I get my Hp printer to download?

    How can I get my HP F380 printer to download?

    Ok, let's try this first...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.
    Then try installing the driver again, I think with the printer plugged in is OK.

  • How can I get gridlines to print on my template that I created in Numbers?

    I am trying to create a template in Numbers and I want the gridlines to print.  The drop downs for x-axis and y-axis under Chart inspector are shaded gray and are not able to be clicked on.  How can I get those gridlines to print?

    Suzy1107 wrote:
    Its a spreadsheet that looks like excel, has two columns at the top and 49 rows at the left side
    You seem to be looking in the Chart Inspector for formatting options for the table. Use the Table Inspector, or the Format Bar for Table Cell Border format options.
    I have circled the border format controls in the Format Bar in the attached screen shot:
    Regards,
    Jerry

  • How can I get the wireless hardware fixed on my HP photosmart C7250 all in one printer?

    I did the test by holding down the # 6 and it said that the wireless hardware needed service.  Any advice on where to get it serviced?  Thank you! 

    Hi,
    Please use the following link (under "Manage Print Apps" to cancel/remove it:
      http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp​...
    You may also get this:
    My Print Apps
    To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
    Please also try this (if the above mothod did not help):
      http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll​=false&destPage=document&cc=us&dlc=en&docname=c031​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I use a wireless printer and the internet at the same time?

    Hi there, I just installed a wireless printer but to use it I have to click on the Airport icon and select the printer in the 'devices' list. This deselects my connection to my wireless modem. Is there any way I can print and look at the internet at the same time? This does not seem right to me, I print a lot of info from the net and don't want to spend time selecting and waiting for connection back and forth all the time.
    Bo

    I have a Linksys WAG54G2 wireless G router. This router has a Wireless Protected Setup button which I understood would initiate a search for wireless devices and aid setup but it seems to do nothing. I made the mistake of tryig to use the linksys installation disk to access a setup wizard and that just reset my entire network back to factory settings and it took me 4 hours to reconfig my system. Won't be touching that again. It all seems odd, the printer is compatible with the router as far as I can see but I don't know how to get the router to recognise the printer.
    bo

  • I have an iPad 3 and when trying to print Pages documents from EpsoniPrint there is a border, how can I get it to print normal without sending it to my Mac?

    I have both quickoffice and pages on my iPad, and when I try to print from either of those through EpsoniPrint they don't print "normal".  And pages prints with a border around it.  How can I adjust that or is there a better app for printing via wireless?  I have an epson 510, so it's wireless capable but not AirPrint.

    If you have a Mac I would recommend that your install Printopia. Here is a link to it:
    http://www.ecamm.com/mac/printopia/
    With Printopia, any printer that you can connect to your Mac will appear on your iPad as long as they are on the same wi-fi network. Try Printopia to see if that border goes away. Good luck!

Maybe you are looking for