How can i get out the bits of paper left inside my hp laserjet p1606dn printer from a serious jam?

This printer got a jam last spring, and ever since it continues to get jammed. There is quite a bit of paper that I could not get out using the instructions in the manual. How can I get to it?

I understand you are getting a repeated paper jam message. This document may help you in regards to cleaning the paper from your printer.

Similar Messages

How can i get out the reading list???

how can i get out the reading list?

This really needs to be posted in the Safari forum but I will answer it here.
What do you mean by get out? You want to see the list? Clicking on the pair of glasses controls the display of the list. The glasses are in the gray bookmark bar. Click once to open and click again to close the reading list.

How can I tell when the IP address was changed on my HP Laserjet 2055dn printer?

I have an HP2055DN printer that someone changed the IP address on. It is connected to a print server ( Windows 2003 server ) on our network. I have not found an entry in the logs of the printer or in the event logs on the Print Server. Does anyone know where to look or what event id or message I would be looking for?
Any help would be appreciated.
Thanks

Since this is a 2 line display model, you should be able to go to the control panel of the printer and print a config page.
Control panel - right arrow - reports - config page.
The IP address should be in the left hand column on the config page.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?, I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?

I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,

Try starting in safe mode:
Ciao.

Every time I hit the app store I get the message "loading". How can I get out of this and get the app "qrreader" that I want to load???

I'm getting a little frustrated trying to get the "APP " "qrreader". Everytime I tap on the APP icon it is "loading". How can I get out of this and start over with the
APP I want???

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

How can I get out of the flashing Apple screen on Iphone 3 ?

How can I get out of the flashing Apple screen on Iphone 3 ?

Turn it off. While pressing and holding the Home button, connect it to your computer with iTunes open. Hopefully you will be able to restore it after that. If not, it requires service.

Trying to purchase music, it sends me to verify my acct info, I do that hit done, it asks if I still want the purchase, I select Yes and it sends me back to verify billing information. How can I get out of this darn loop and make my purchase?

In itunes Store. Trying to purchase music, it sends me to verify my acct info, I do that, hit done, it asks if I still want the purchase, I select Yes and it sends me back to verify billing information. How can I get out of this darn loop and make my purchase?

Hi itunes for windows,
If you are being repeatedly prompted to authorize iTunes, even after you have already done so, you may find the following article helpful:
Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
- Brenden

My ipad has frozen screen white the notification saying Not Enought Storege. How can I get out off it?

My ipad has frozen screen white the notification saying Not Enought Storege. How can I get out off it?

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use it again.
You need at least 50 MB of free space to back up onto iCloud. Open Settings > General > Usage, and remove applications that you do not need

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

My hard drive crashed and I have lost my Itunes library. How can I get my the music that I loaded from my own CDs back on my PC from my iPod?

My hard drived crashed in my HP Pavilion desktop and I have installed a new one. I have Windows 2007. My Itunes library is gone. How can I get all the music that I loaded onto my iPod from my own CD's back into an Itunes library?

The loading of audio files to iPod is designed to go one way only: computer to iPod. There are some third-party applications available which will rescue an audio library and write the files back to a PC HDD. The playlists might not copy, nor the album art work, nor videos but you might be able to recover all audio files. Some apps are open source and available for free download, for example: Senuti, Onyx. There are others which are Windows-based; do a Google search to find out.

How can I find out the list of users who has the access to IT 0008

All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.

combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS

I've received a message that says my message can't be sent. Unfortunately, the list of recipients is so long I can't see the bottom to click "try another server". The message won't scroll. How can I get to the options at the bottom?

I've received an error messagae that says my message can't be sent. Unfortunately, the recipient list is so long I can't see the bottom of the error message to click "Try again" or another option. The message won't scroll. How can I get to the bottom of the message?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

How can i get out the bits of paper left inside my hp laserjet p1606dn printer from a serious jam?

Similar Messages

Maybe you are looking for