How can i get past the low ink screen?

ok i know there is a way to make your printer "get past" where it tells you that you need to replace the ink cartridge, and it just might not show the right ink levels. i know this because i have gotten past it before, I just do not remember how. to all of you out there reading this that know...PLEASE help!! look, i am a single mom working 2 jobs and hardley have enough money to feed my kids and put gas in my car with what i make no i dont need sympathy i just need to know how to get past this issue. I refilled my ink cartridge because i can not afford to spend $125.00 on new ink cartridges. the last time i did, they leaked out of my printer and almost ruined the printer AND the table i had it on! And YES THEY WERE HP CARTRIDGES!!! if anyone knows how to get past this issue PLEASE let me know!!! I am trying to print out my resume and it wont let me past this screen. the issue of it being under warranty does not matter because that is long past and yes i will take the chance of it being ruined because if i dont get past this the printer is going out the window and yes then it be solved.PLEASE HELP!!!!!!!!!!!!

Hello , Welcome to the HP Support Forums!
I understand that you're getting a 'Low Ink' message on the front panel of your HP Officejet Pro 8500 Wireless All-in-One Printer and would like to bypass this message. The ink system in your specific model of printer requires ink to be in the cartridges for the printer to function. Ink is required for printing, but also for regular maintenance on your printer. The Semi-Permanent Printheads within your product control ink for going on the page. If your printer is not able to perform regular maintenance because it has empty ink cartridges installed, damage may be caused to the Printheads. Should the Printheads become clogged or defective they will also need to be replaced. For additional ink usage information please click here. When printing from your computer, colour ink may be used to print black, depending on the program that you're printing from. If you prefer to print in only black ink and save your colour cartridges you can set your print driver to 'Black Ink Only'. However, your printer cannot be in an error state for these changes to take affect. Therefore, if you would like to adjust your print driver setting to use only Black ink when printing black only documents, you will need to replace your depleted cartridges first. I am happy to provide additional assistance with adjusting your print driver setting once you have replaced the depleted cartridges. I look forward to hearing from you!

Similar Messages

Apple ID. My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?

My newly updated iPad 2 wants an email for the apple ID. My apple ID is not an email address. How can I get past the set-up screen?
I can't change my Apple ID. It would mess all my stuff up.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can i get past the ipad activation screen

Hi
my mum bought an iPad on contract 2 years ago with vodaphone. my mums never had much use for it so when i no longer had an iphone i used the ipad pretty much 24/7 with my own email address etc
problem is, i needed to desperately reset it as there was so much crap on there, withtout thinking ive reset it and now im stuck at the activation screen.
its asking for my mums original icloud account but me nor her can remember it and it wont allow me to do anything as we had the 'find my iphone' switched on, on the device
1. is there anything i can do?
2. if not, do i contact vodaphone or apple?
thanks

Take your iPad and purchase receipt to an Apple store. They can assist you.
 Cheers, Tom

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

How can I get past the error messages that keep popping up when I try to download Flash player?

How can I get past the error messages that keep popping up every time I try to download anything?

Hi
Could you please let us know more about the error messages that you got?
The following page has information on the error messages: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html
Thanks,
Sunil

How can I get past the questions, to change password

How can I get past the questions, to change password

Hello Cocoscafe
If you have a rescue email address setup in your Apple ID profile, then you can reset the security questions. You would need to know those answers to get passed the screen to log in and verify.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
Regards,
-Norm G.

MD G4 can't get past the log in screen

Trying to diagnose what's wrong with the trusty mirrored doors G4. The light goes on when I press the power button, the chime sounds, but can't get past the log in screen, and the mouse arrow is stuck on the left top of the screen; I can't get the mirrored door to open, to try starting with the original cd; can't get to how to start it from an external drive.
At this point I'm not going to spend much $ to save this computer which has served as a backup device for the past 3 years, but would like to get in one more time to make sure I have everything I want to save. Suggestions?

If you have enabled remote log in and know how to ssh into the Mac from another computer - reply and I'll walk you through the commands to look at the logs before you log in from the keyboard.
If not - you should boot from a CD and try to repair the disk and possibly look at the logs using the console utility.
Please advise if you want to look at the logs to see what the problem is or if you can fix it from using the CD's to repair the disk.

HT4623 I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen. I entered emails as well as opted out. I have gone back, but Apple ID Security insists I add security questions and mail. HELP!

I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen. I entered emails as well as opted out. I have gone back, but Apple ID Security insists I add security questions and mail. HELP!

Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.

After restoring my ipad from itunes, I can't get past the set up screen

How do I get past the set up screen after restoring a new iPad 2 from an iTunes backup. I'd like to sync my apps on my iTunes to my iPad.

What setup screen? I have restored from a backup several times and the iPad always syncs when the process is complete. What are you seeing on the setup screen?

My wireless mouse and KB are in discovery mode, but I can't get past the "enter password" screen because my Mouse and KB will not work...batteries have been changed.

My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.

Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred

How do I get past the Emergency call screen iphone 5 ios 6

I upgraded my iphone 5 to ios 6.1 and now I can't get past the Emergency call screen.
I try to hook it into my computer with iTunes but it says I need to unlock the phone with my password but I can't find anywhere to do that.
I tried the reset but that didn't help.

There should be a Black Button with a White Arrow pointing left at the Bottom of the screen.

I want to use this phone w/o a verizon account or number, but I can't get past the set-up screen. Can I use this phone to surf there web only and get past setup

I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?

I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy

I can't get past the grey apple screen using mavericks

I can't get past the grey apple screen trying to boot up with Mavericks. I had been using Mavericks for about a month (only had issues of freezing occasionally). I read in one of the posts here that I should try holding command R down when booting. I did now I just get a grey screen without the apple. Any advise?
I have a Mac Mini

Hello ther cnickers,
It sounds like the initial install of Mavericks went ok, and you have been using it for a while, but now cannot boot to your desktop and are stuck at a gray screen with an Apple logo. I would recommend a couple of things here:
First, try performing a Safe Boot to see if that will load up for you. If so then leave Safe Boot and restart from the Apple menu to try and get to your deskop:
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
From: Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If that works fine, I would next also verify and repair your disk if needed.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How can I get past the white screen?

When I start my iMac I see a message that my start up disk is full and that I need to delete files. After I type in my user name and password, all I see if a white screen. This problem started today. The error message about the start up disk started two days ago, and when I looked at the disk, I saw that over half of it has files described as "other". The hard drive is 250 GB. I have Time Machine backups but I don't know how to get to them to help me. So, I guess that I have two questions: how do I get past the white screen, and what are the files that are catogoraized as other? Thanks.

I did not put the OS info in my question because I am not sure what I have. I upgraded to Lion so that I could use the cloud between my devices, however I do not know the number.
Apple menu item->About this Mac and the version is listed there. Click on that and get the build number. Click again and get the machine's serial number.
I am stuck on the white screen. Any other advice?
Start with a google search for white screen mac. This one might do the trick: http://www.mac-forums.com/forums/apple-desktops/138137-imac-wont-get-passed-whit e-screen.html

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

How can i get past the low ink screen?

Similar Messages

Maybe you are looking for