How can I get perfect synch on exported animation video?

I use CS4 on Windows 7. I have a lot of RAM and a big CPU. And yet, I am having trouble getting the exported video from my animated cartoon FLA to match the good motion/synch on the SWF. The FLA is sized 1920x1080. I have been exporting it down to 640x480 with various export settings for video and sound. The product slows down the motion at early moments like a scene shift tween, while the sound moves along as scheduled. Simply put, I want my MOV file's animation to perfectly match that of the SWF.

I tried that with the first sound file. When I did, all the other sound files began playing prematurely on the SWF. Should change all of them to stream, then playback?

Similar Messages

  • How can I get rid of shimmer effect in videos that I create in iMovie?

    How can I get rid of shimmer effect in videos that I create from photos in iMovie?

    Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
    But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
    As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
    Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

  • My ipad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

    My iPad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

    It is most likely a size issue. I have a 3 minute video that's almost 200 megs. If you're just trying to show it, you might consider youtube. if you're wanting to upload/share it then you can try things like Dropbox or other onlilne file sharing programs.

  • How can I get my stereo to play music videos from my Ipod Nano?  It comes up with the message "This device not supported".  Strangely my Iphone IS recognised.  The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

    How do I get my Ipod to play music videos through my theatre system?  I keep getting the message "This device not supported".  My theatre system WILL recognise my Iphone however.  The theatre system, Ipod, and Iphone are all less than 4 months old.  Any suggestions welcome!

    Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

  • How can I get a .jpeg image from my video image?

    I want to take an image I captured on film, and turn one frame into a .jpeg file so I can use it in Photoshop. I've created a freeze frame by hitting SHIFT+N .... but now how can I use this image elsewhere? Or is there another way?

    What I always do is go to File> Export Using Quicktime Conversion> then on the bottom change the "Format" option to "Still Image" and change the "Use" option to whatever you like. (JPG, BMP, etc.)
    Just make sure your on the frame you would like to export.
    There might be a better way but this hopefully helps.

  • How can I get an AIR application to a video output via DeckLink card with alpha channel?

    Hi there!
    Anybody knows how to get an AIR application to a video output via DeckLink card with alpha channel?
    The reason is because we want to develope tv show games with air.
    Thanks.

    See if these have iMac Nvidia drivers:
    http://www.laptopvideo2go.com/drivers/

  • How can I get my aperture library exported to iphoto?

    Can anyone specifically tell me how to move pictures from aperture to iphoto? Thanks!

    You can't import an entire actual Aperture library file into iPhoto.
    But you can always create an album with all the images you want to export, select File>Export Versions and then export them to a folder where you can then import them from within iPhoto. You'll be making duplicates (just so you'll know that it will take up some additional disk space.)
    If you have some sort of structure you want, you could do this with multiple albums so that iPhoto imports them as individual rolls.

  • How can I get a higher quality export from Imovie - QT & iDVD came out bad

    The playback on my imovie came out corrupted but it transferred ok to Quick Time and I also burned a DVD but the quality is not very good. Any suggestions on how to get a better version. Please keep in mind that the imovie file is huge - 29Gig and the QT file compressed it down to 350Megs. The whole movie is running around 43 minutes. Any suggesstions are appreciated.
    iMac   Mac OS X (10.4.6)  

    sorry, dogma, but you compressed your project by a
    factor of 1:100, and complain quality... ? did you
    use a preset of iM, or did you select any "Expert
    Options"?
    and hopefully, you didn't try to use that crunched
    file for usage in iDVD??
    store/save you project in your Movies Folder, launch
    iDVD, select from the media bin your project - done.
    last questions: is your project set as "mpeg4" or
    "dv/NTSC"; did you import from miniDV (what iM is
    made for...) or did you use any.. other formats?
    happy holidays
    Hi - Yep I did use the crunched version for the dvd and have tossed it. I am now transferring a new version from imovie to QT under the pre set of high quality. Since this is the first time I have done a movie I am not sure what settings I would use under expert options - suggestions? I would love to tranfer the imovie right to idvd but at the moment I only have 8G left on my Mac so this would likely be a problem. The movie was exported from a mini DV.

  • How can i get Presenter 7, to export my linked videos that are in my Powerpoint?

    When i publish from Presenter 7, all my videos that i have linked in my Powerpoint 2010 get left out, is there a way round this?
    My videos are in wmvs, do they need to be another format, or is this a feature Presenter 7 can't do?

    Digiking,
    If you convert the original WMV files to FLV you should be able to get them to work.  I used both Format Factory (a free video convertor) and Adobe Media Encoder to change some WMVs into FLVs.  I then imported them into PowerPoint 2010 (32bit version) with the Presenter Plugin.  I the published the PowerPoint (again using Presenter plugin) to our Adobe Connect Server and the videos played back fine.
    (I did get an error message when importing the FLVs into the PowerPoint, but they still imported and played back fine.)
    Hope this helps!

  • How can I get surround sound to export through the correct speakers?

    Hello there!
    I am experienced with Soundtrack Pro and can successfully export 5.1 surround.
    I'm moving over to Logic Pro to try out 7.1 surround, but I can't even export 5.1 surround successfully since dialogue for example comes out of all speakers, yet I've panned it to the front centre speaker. Please note I do not have surround speakers set up with my computer as whenever I do connect to my amplifier it just does everything through all speakers (whether using Soundtrack Pro or Logic Pro). I am using the visual surround panner as my guide. Either way the surround export in Logic Pro is not what I'm doing within the pogram.
    I believe I've got everything set up properly:
    In Preferences-Audio-Devices-Core Audio I have device Sunflower (16ch)
    In Preferences-Audio-Output- I have 5.1 (ITU 775) or 7.1 (3/4.1)
    All tracks are set with the surround panner and I can use just like in Soundtrack Pro.
    I can bounce the individual stems properly.
    It's just not in proper surround sound.
    Where am I going wrong?
    Thanks in advance.

    EMB -
    What is the function of Sunflower in your work flow? Usually its used to route audio between programs. In the case of Logic, you simply need to route to the outputs for things to work right.
    I guess we should start with your interface - do you have 6 actual separate outputs that you can use to monitor your surround sound?
    (NOTE: I no longer do surround, but used to). In my case, I used a RME Fireface 800 which had a bunch of analog outs. I used outputs 1&2 as L&R, 3&4 as Center/Sub, and 5&6 as Rs/Ls. Each of these outputs was connected to a monitor so that I could mix in surround.
    When you say you are bouncing 5.1 successfully, do you mean it is creating 6 separate files?
    BTW - what mechanism are you using to playback your surround files? I used to use a PC program to burn DVDA's, which I then played back on a DVDA-capable disk player.
    If you are looking to encode the files so that they will playback on a traditional surround sound system, you would need to put them through a Dolby Digital encoder. If you have had Logic for a few years, you MAY have Compressor which can do this. Otherwise, Dolby Digital encoder software can be somewhat expensive.

  • How can I get iTunes 11 to play a video's audio over airplay on my Denon?

    It still shows AppleTV, but on the previous iTunes version it would play a video's audio on the Denon through Airplay.

    If the Denon shows in airplay mirroring you can just turn on mirroring and get the sound.  Otherwise try System Preferences -> Sound -> Output and choose the Denon there. Any system sound will play through the airplay device.  I don't know why apple doesn't just give an airplay option from the menu bar sound icon to make this easier.... seems like they are pushing people to mirror

  • How can I get back all of my family videos from the iTunes monster?

    So here's the thing.
    Over the past few years I have accumulated a whole heap of home videos as well as movies, TV episodes etc. etc. which has grown and grown to the point where there was no more space on my 60GB hard drive.
    So I go out and buy an 80GB video iPod so that I can store the videos on that.
    I go through the extremely lengthy (3 days) and frustrating process of converting all my files to mp4 using Videora converter and load them onto iTunes and then onto my new iPod. I then click 'Manually manage songs' in my iPod options so that I could delete the videos from my computer, and have them still on my iPod. This was about a week ago and since then everything has been fine.
    When updating my iPod this morning, I manually ejected the ipod once my new music was added, only to find that the ipod now contained NO VIDEOS! As it turns out, the iPod automaticaaly reverted to 'automatcally manage files' without my prompt.
    So now whilst I have the files on iTunes, they cannot be found as they have been deleted and they are no longer on my iPod. Is there ANY way that I can get them back? Anything at all? System restore or something?
    Any help would be greatly appreciated.
    Dell Inspiron 8600   Windows XP  

    if you mean restore an backup from an earlier iphone then it ask you or you can manually choose restore
    if you mean apps located in your itunes library then you check the apps you want on the iphoen in the apps tab when you have it connected to computers itunes

  • Also how can you get an image preview in the video section

    The music videos you buy in iTunes come with a preview that is displayed. I tried capturing an image with VLC, then converting it to a JPEG. But the when I "get info" and try and drop or paste the image it won't allow me. Any Tips?

    The music videos you buy in iTunes come with a
    preview that is displayed. I tried capturing an
    image with VLC, then converting it to a JPEG. But
    the when I "get info" and try and drop or paste the
    image it won't allow me. Any Tips?
    To set "poster frame"
    -Play video in iTunes
    -Click on video so it brings up a 2nd window (its own window)
    -Locate the "frozen picture" by pausing. You can manually shift through the whole video by using slider.
    -When you have your picture, right click, and choose "set poster frame".

  • How can I get flash player to show full video using Firefox (23.0.1) on MAC (OSX 10.8.4)

    On Youtube and other sites, I only see the top left quadrant of the video.  I tried uninstalling and re-installing the latest flash player and that did not solve the problem.

    Actually, that was my fault - I saw "Tab" and thought of the full settings display and way I'd normally get to the proper place.  Anyway, I tried taing the number fo time you mentioned but it did not work. Pressing the Tab key 6 tims and pressing enter did get me to the right place. Pressing Tab once highlights the full box (note yellow outline in 1st pic below:
    From there, if I "press Enter again. Press Tab 5 (five) more times, press Enter and close the box." the box does not close and I get to:
    If, on the other hand, when I get to the Display page a press tab twice, it highlights the item I need to uncheck as shown below:
    If from there I Press enter, it does nto uncheck the box, which is what I think needs to be done. Neither does the space bar. And if I follow out the instructions from there I get to"
    So, I'm guesing we may have different items on the setting pages.  My version of flash is 11.8.800.94.

  • How can I get rid of a greyed out video title on my iPhone 4?

    I deleted the video from the phone then trashed it in iTunes. I can't find the video anywhere but it shows up, greyed out, in the list of videos.
    Can anybody help? Thanks in advance.

    Try checking "Manually manage music and videos on the Summary tab of your iTunes sync settings, click Apply, open the folder on your iPhone on the left sidebar by clicking on the triangle to the left of its name, click on the Movies folder and see if you can click on the video and delete it from there.

Maybe you are looking for