How can I get Photoshop to run?

I have a brand new MAC. I installed the latest Photoshop. It said I needed to install Java Runtime. I did.
When Java was finished, it said it couldn't be installed. Does anyone know what I'm doing wrong?

What couldn't be installed Photoshop or Java? Could you please provide the exact error message? Also what version of Mac OS are you using?

Similar Messages

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

How can I get photoshop elements to open my nef images?

How can I get photoshop elements to open my nef images?

The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

How can I get Firefox to run KIOSK mode on Android phone? I am trying to use rKiosk but have not been successfull. I'm running 10.0.3 on the phone.

How can I get Firefox to run KIOSK mode on Android phone? I am trying to use rKiosk but have not been successfull. I'm running 10.0.3 on the phone.

Found an app to lock down the phone. SUREFOX!!!

IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
B-rock

How can i get VMware to run to lion?

vmware will not open on lion! how can i get the to run?

You contact the VMware vendor and get their support.

How can I get Photoshop Elements 13 to recognize my Epson WF-3520 multi-purpose scanner?

How can I get Photoshop Elements 13 to recognize my Epson WF-3520 scanner?

Can you try renaming the %APPDATA%\Adobe\Photoshop Elements\13.0 folder and see if it helps.
Thanks,
Anwesha

Exchange 2013 remote session running as PowerShell version 2.0. How can I get it to run version 3.0?

I'm trying to use the newer Powershell 3.0 features, particularly the ability to disconnect/reconnect a remote session, for our Exchange 2013 administration tools. I have 3.0 on my workstation, and am connecting to a remote session on an Exchange 2013
server (on Server 2012).   Even LOCALLY on the Exchange 2013 server Exchange Management Shell I get the same behavior:
Exchange Command Shell on an Exchange 2013 server (running Windows Server 2012)
[PS] >$PSVersionTable
Name                           Value
PSVersion                      3.0
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
CLRVersion                     4.0.30319.19117
BuildVersion                   6.2.9200.16628
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
[PS] C:\Windows\system32>Get-PSSession
Id Name            ComputerName    State         ConfigurationName
1 Session1        mercmbx35r.n... Opened        Microsoft.Exchange
[PS] C:\Windows\system32>$session = Get-PSSession
[PS] C:\Windows\system32>$session.ApplicationPrivateData.PSVersionTable
Name                           Value
PSVersion                      2.0
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
BuildVersion                   6.2.9200.16628
CLRVersion                     4.0.30319.19117
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
How/where can I force the Exchange session to run version 3.0?
Thanks in advance,
Rick Tatem

I still can't get it to work that way. I changed my cfexecute to:
<cfexecute name="C:\windows\system32\cmd.exe" arguments="/c C:\Inetpub\wwwroot\captcha\#cmd_filename#" outputFile="C:\testoutput.txt" timeout = "90"></cfexecute>
And I changed my bat file to have:
<cfsavecontent variable="cmd_content">
cd\
TSC.exe /s "#newString#" C:\Inetpub\wwwroot\captcha\#FileName# Mary (for Telephone)
</cfsavecontent>
The output file is showing:
C:\ColdFusion9\runtime\bin>cd\
C:\>TSC.exe /s "3.....P.....4.....Z.....8.....U.....7.....X....." C:\Inetpub\wwwroot\captcha\3P4Z8U7X-105724.wav Mary (for Telephone)
I still can't get it to run the exe. I have watched the process list while running this and the exe doesn't show up. I tried cfexecute on the exe directly before trying the bat method, with hard coded arguments, and it still didn't work. I am so lost right now this makes no sense to me.

You can't buy photoshop in the shop anymore but we can't purchase it online because we are in a country that it isn't available to (Cook Islands) - how can we get photoshop?

Unable to purchase photoshop online but I thought they had stopped making it available to buy online so how do we get photoshop in the Cook Islands if we can't purchase online?

The Adobe New Zealand office might be the best bet.
See if they can arrange something.
New Zealand office
171 Featherston Street
Wellington, 6011
New Zealand
Tel: +64 4 894 8538
Gene

How can i get photoshop again on my computer after I throw it away?

Hey there, I am Loes from the Netherlands and I have a question, I tried a lot but it does not work. Hope you can help me..
I wanted to reset the settings of my photoshop, but this didn't work, so I though maybe if I delete photoshop and then install it again I can start over.
So I did. But now I cannot find photoshop anymore. I installed creative cloud again and again but creative cloud says photoshop is "up to date". and there is no way to click on it to download it again. Does anyone know were I can get photoshop again?? Hope you can help me. I just started to try 30 days for free but now i cannot use it.
then if I will have photoshop again I also like to know how I can reset the settings of my brushes.
Thank you very much!

CC desktop lists applications as "Up to Date" when not installed

How can I get Snow Leopard running

I have a 13'' Macbook that was running perfectly fine - I haven't had one issue since I bought it. I bought the iphone 5 and needed to upgrade my itunes to version 7. I was running Leopard 10.5.8 and needed to upgrade my OS to Snow Leopard in order to get itunes. I ordered the software (10.6.3) and installed it on my computer. The installation said it was successful. I restarted my computer but I received a blinking folder with a question mark on it so I googled some solutions to see what could have gone wrong because the installation was successful.
I have tried holding c, option, resetting the pram, disconnecting my battery and pressing the power button for 5 seconds, erasing my HD drive, restoring the HD drive with a Time Machine Backup, and everything else I was told to do but I can not get my computer up and running. If I restart it, I keep receiving the blinking folder with the question mark. I'm not sure how it can not recognize a OS when I go to Startup Disk, it lists my OS being 10.6.3. When I boot the computer from the dvd, it just continues to ask me to install the software each time and I'm going in circles.
Can someone please tell me what to do? It seems that Apple doesn't know what to do, my hard drive was repaired (it wasn't broken), and the installation is going through sucessfully, why can't I get my computer running?
HELP! I'm a photographer and graphic designer and can't afford to be out of commission. All I did was install a software, this shouldn't be this difficult.
Thanks!

Does your MacBook meet the minimum requirements for Snow Leopard?

How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can I get Photoshop Elements 13 to start up in Expert Mode?

I just upgraded to Photoshop Elements 13 for Windows (I was using Photoshop Elements 12 for Windows), and I can't get it to start up in Expert mode. When I exit in Expert mode and restart, it starts in Expert mode and then after a few seconds it reverts to Quick mode.
Note that I have tried the recommendation from previous versions of "Reset preferences on next launch" and that didn't help.
I'm running 64-bit Windows 8.1 and Photoshop Elements version 13.0 (20140831.m.62014) x64, and I've set it to start in the image editor, not in the launch window.
Thanks for your help.

Can you try renaming the %APPDATA%\Adobe\Photoshop Elements\13.0 folder and see if it helps.
Thanks,
Anwesha

How Can I get mod_rewrite to run on 10.6.4?

Hi there,
I've carried over a local wordpress install for some debug/dev purposes on to my local comp and encountered a few issues in getting permalink/mod_rewrite functions to run cleanly.
I've noticed there's a number of posts in this forum about this but none of them appear to give a solution so far.
My setup is as follows:
/private/etc/apache2/httpd.conf
/*Module section*/
*LoadModule rewrite_module libexec/apache2/mod_rewrite.so*
/* didn't know we needed this but read it on a blog post so gave it a shot*/
*AccessFilename .htaccess*
/* in <Directory> sections */
*Options FollowSymLinks*
*AllowOverride All*
/* in <Directory "/Library/WebServer/Documents"> sections */
*Options Indexes FollowSymLinks MultiViews*
*AllowOverride All*
I realise that the AllowOverride All at the <Directory> and <Directory "parent site"> are potentially overkill given that I only want to run the mod_rewrite for a particular user's directory. This then brings me to the specific users conf file (verbose here):
/Private/etc/Apache2/users/[username].conf
*<Directory "/Users/[username]/Sites">*
*Options Indexes MultiViews FollowSymLinks*
*AllowOverride All*
*Order allow,deny*
*Allow from all*
</Directory>
I then created a .htaccess in the user's site directory to call-up the mod_rewrite:
*<IfModule mod_rewrite.c>*
*Options +FollowSymlinks*
*RewriteEngine On*
*RewriteBase /~tariqscherer/*
*RewriteRule ^index\.php$ - [L]*
*RewriteCond %{REQUEST_FILENAME} !-f*
*RewriteCond %{REQUEST_FILENAME} !-d*
*RewriteRule . /~tariqscherer/index.php [L]*
</IfModule>
This code above was the rewrite recommended by WordPress, so I assumed that it would work. However, I do not get any rewrite action occurring whatsoever.
The Apache error log (/var/log/apache2/error_log) gives me a File does not exist result:
Mon Sep 06 16:03:55 2010 error client 192.168.1.18 File does not exist: /Users/[username]/Sites/about, referer: http://dasein-im-welt/~*[username]*/
This error links back to the access log's GET 404 error (/var/log/apache2/access_log):
192.168.1.18 06/Sep/2010:16:03:55 0200 "GET /~[username]/about/ HTTP/1.1" 404 218
I've then tried to debug this process a little bit by starting a rewrite log over in the httpd.conf file with the following syntax:
*RewriteLog /var/log/apache2/rewrite_log*
*RewriteLogLevel 3*
And then retrying hoping to trace some of the errors. Much to my surprise the log remains empty so I can only assume that the rewrite is simply not operating at all.
I then thought I should try a simple rewrite test to ensure that the error wasn't from the wordpress .htaccess cod: and put through the following in my .htaccess file:
*<IfModule mod_rewrite.c>*
*Options +FollowSymlinks*
*RewriteEngine On*
*#RewriteBase /~tariqscherer/*
*RewriteRule ^alice\.html$ index.php*
*#RewriteRule ^index\.php$ - [L]*
*#RewriteCond %{REQUEST_FILENAME} !-f*
*#RewriteCond %{REQUEST_FILENAME} !-d*
*#RewriteRule . /~tariqscherer/index.php [L]*
</IfModule>
I expected this rewrite to give me a rewrite over to index.php for an address entry of alice.html. However, no difference in terms of the end result - browser gives me a fail and logs are as follows:
Access_Log:
192.168.1.18 06/Sep/2010:16:19:15 0200 "GET /~[username]/alice.html HTTP/1.1" 404 222
Error_Log:
Mon Sep 06 16:19:15 2010 error client 192.168.1.18 File does not exist: /Users/[username]/Sites/alice.html
Oh and the rewrite_log, though created, remains blank.
I can therefore only assume that the mod_rewrite is simply not being called at any point and not rewriting the http GET requests in any form whatsoever to correct directory.
My Question therefore is.
Has anybody managed to get the mod_rewrite running under Mac OS X 10.6.4? Taking into account that:
1. .htaccess is set by the AccessFile in httpd.conf
2. AllowOverride All is set in the httpd.conf root <Directory> and <Directory "location"> sections, as well as in the [username].conf file.
3. FollowSymLinks is also set under all options
4. +FollowSymLinks is also set as an added precautionary measure in the .htaccess file
I would be greatful for any help on this whatsoever.
Tariq Scherer
PS: the username used on my comp was substituted by [username] above, I hope this can help for anybody else to just substitute the entries out on their own local config or to provide a comparison entry.

HI All,
This isn't a solution per se, but in order to overcome the .htaccess rewrite calls limitations I had to:
1. Rebuild Apache (up to 2.2.16) and explicitly specifying a rebuild with enable-rewrite
2. Rebuild PHP in order to get a native module going.
This solution works, I event went as far as just carrying over the exact same config files over to the new Apache install. There seems to be a block in the native Apache binary build that prevents usage of .htaccess (security reasons I presume?).
The catch, however, is you will get pid locks over the two installs unless you explicit a separate lock file and you won't be able to call up the new Apache install from the preference panel in OS X fashion - need to be a bit patient with the terminal is all.
For the apache install, you have to make sure you set a prefix location that suits you (and remember the put that prefix then over for the module load in your config as it won't be able to access your old .so modules):
sudo ./configure --prefix=/usr/local/apache2 --enable-rewrite
Also note, that when recompiling php with mysql support, a few config options need to be set to disable the cgi build options (not sure why, but it does the trick). The command for the PHP rebuild is as follows:
./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=/usr/local/mysql --disable-cgi
Kind Regards,
Tariq Scherer
http://twentyfoursomething.wordpress.com/

How can I get Photoshop to run?

Similar Messages

Maybe you are looking for