How can I get PPro CS6 timeline to correctly show clip stretched in AE?

I have a 2 second clip in my timeline in PPro CS6 that I want to stretch to roughly 18 seconds. I did the following steps:
1. right clicked on the clip in the timeline and chose Replace with AE composition
2. when AE opened, I clicked on stretch in the composition and stretched it to 1000%
3. I changed the composition settings to reflect the new duration of 18 seconds so I could view the entire clip in the timeline
4. With the footage highlighted, I went to layer/frame blending and picked frame mix
5. on the composition timeline, I toggled the frame blending on
6. saved the AE composition
7. Back in PPro, the clip is now pink and shows that it's a linked AE composition, but the length of the clip has not changed and therefore only plays the 1st 2 seconds of the clip
In order to see the entire AE linked clip, I have to either click on the AE linked clip that shows in the project panel, down to the timeline or right click on the clip already in the timeline and choose speed/duration. Unlock the link between duration & speed and change the duration to the length of the AE stretched clip, leaving the speed at 100%.
My question, how can I make the AE linked clip automatically show correctly in PPro?
Also a related question, since the composition is a linked compostion in AE, the frame blending box isn't available on the composition timeline so I have to go to Layer/Frame blending to turn frame blending on. Is this correct? If so, how can you set the quality to draft or best? Also should I pick frame mix or pixel motion to get the smoothest frame blending?

Fuzzy and Ann are correct in my opinion. Premiere Pro thinks that the duration on the timeline is just the first part of a clip that has been given a rather long handle, so to speak.
Just drag it out as far as it goes. Premiere Pro will not let you drag it out farther than the end of the comp under these particular circumstances.
Why not do that automagically for you? Too dangerous. What would it do with anything on the sequence out to the right of the clip? Overwrite it or push it?
Now, I suppose that a good way to do that would be to alert you about the problem when you return to Premiere Pro and ask you how you want it handled, but that would take a Feature Request. And I am not sure what would need to happen if you had made a bunch of changes to other links other than that one before returning to Premiere Pro.
Before I suggest that you do that, I have to ask why you didn't just use the Time Remapping feature of Premiere Pro do do the same job. That way Premiere Pro would have known what you wanted to do. I understand that Timewarp and Time Remapping both have different strong and weak points, I am just curious if you tested both and decided on using After Effects for a particular reason.

Similar Messages

HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps.

I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

I have much fewer pics on my pc photo stream than my ipad and iphone. how can i get my pc photo stream to show all my pics?

This is all just a partial answer since details will depend upon how you want to do it.
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that. iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
I guess you could also look into getting iTunes Match.

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

I have my ipod backed up on multiple computers but only one recognizes all my playlists. How can I get all my play lists to show up on multiple computers?

I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?

If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it.

How can I get Encore CS6 back after CC Cleaner tool removed it?

I was working on a project on my home computer using CC and now that I'm back at the office, the CS6 and CC stuff doesn't play nice. I was going to upgrade the Creative Cloud but it kept popping up the A12E1 error. So I followed Adobe's 4-step fix which removed all the CS6 products from my system. I'm fine with just having CC, but I need Encore which is not available through CC. How can I get it back? Please don't suggest I use another DVD program. I prefer to stay in the Adobe family for the dynamic linking, among other reasons.

You can download all CS6 programs by manually selecting a different version from the CC web page. Encore is bundled with Premiere CS6. Alternatively you can try this:
CS6 product downloads
Mylenium

How can I get the scrubber software to correct a driver installation error?

I am currently on Windows 8.1. When I try to install the printer driver for my OfficeJet Pro L7650 I get the following error message: "System cannot find file specified".
I have read that there is a scrubber software that will solve this issue. How can I get this software?
This question was solved.
View Solution.

You can get that HP program here.
Restart your computer.
Next run the HP Printer Install Wizard program found here.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy

I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
Thank you for any help you can provide.

http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there.

How can I get Tex-Edit + to operate correctly again?

In June of this year I got help in this forum on how to use Tex-Edit+ to italicize some text in parentheses. HD came up with a script that worked with Tex-Edit + and was shown in the Thread "How can I get Applescript to work correctly again."
I tried to apply the same script to another document but I can't get it to work this time. The procedure requires copying the document to a Tex-Edit + window. I get this window by opening Tex-Edit + and selecting "New". When I copy the document to this window, the type becomes larger and is colored blue. When I try to run the Tex-Edit + script, it returns "Cannot open document 1". I am making some kind of mistake but I don't know what it is.
Would appreciate comments.

Yvan-- Good idea. Here's the script:
"I don't know why this is happening. But I would recommend that if you have a large document to process, you get Tex-Edit Plus (not TextEdit), copy and paste the contents of your original document AppleWorks document into a new Tex-Edit Plus window, and use the following script instead:
tell application "Tex-Edit Plus"
tell document 1
replace looking for "^c" replacing with "rrparmarkrr"
replace looking for "(" replacing with "^cxxbeginitalsxx("
replace looking for ")" replacing with "^cxxenditalsxx)"
set parcount to count paragraphs
repeat with x from 1 to parcount
if paragraph x begins with "xxbeginitals" then set style of paragraph x to italic
end repeat
replace looking for "^cxxenditalsxx" replacing with ""
replace looking for "^cxxbeginitalsxx" replacing with ""
replace looking for "rrparmarkrr" replacing with "^c"
end tell
end tell
Almost instantaneous..."
H
As noted, this script worked fine on the first document I tried. (I pasted it into a Script Editor window.) With the second document, it doesn't work properly, as I explained in the first post above.
I don't know what I'm doing wrong.

How can I get my CS6 to work in Mavericks?

Hello all,
I'm coming into my second week of desperate attempts to make my After Effects CS6 (Volume License) work in the cursed Mac OS 10.9 : (
I'm back to using CS5.5 which works, but my clients are getting irritated by having to down-save all documents to CS5.5 for me.
I've been in contact with several Adobe advisors without luck, so I'm trying to reach out again, hoping someone has been able to solve this problem, it seems I'm not the only one suffering from this.
– I've installed CS6 OK.
– I'm trying to patch it to 11.0.4, message keeps saying "Adobe Application Manager is damaged or missing, please reinstall"
– I've tried loads of ways to remedy this; CC cleaner, surgical removal and reinstallation of all Adobe files in various order, silent installs, all kinds of permissions repairs and adjustments, reinstalling AAM, installing AAM for volume licensing, studying the PDApp.log, install and crash logs,
I've considered wiping my entire system and trying to downgrade to Mac OS 10.8 in order to get my CS6 back up and running but I worry this will lead to new problems.
Grateful for any tips or help.
many thanks,
Fredrik

Hi Rick,
do you mean I could get a direct download link to After Effects 11.0.4? So I don't have to run this patch that never seems to work?
Hard to believe all the Adobe tech support guys I've spoken to wouldn't have mentioned that, I've spent hours and hours on the phone already....
I will try!
thank you

Can't get Canvas and Timeline Windows to Show

Not sure what happened but Canvas and Timeline windows won't show. Pls help!

I'm completely new to Final Cut Pro (I just got Studio), and I've been having the same exact problem: I open up Final Cut Pro, open a new project, and I only get the Browser and Viewer windows. I go to Window/Arrange, and I still can't open up the Timeline or the Canvas. I would just double click on a Sequence, but I don't know what the difference is between a sequence and a clip.
Just to help you guys out, I'm working on the "Into the Blue" thing from the Training DVD; I had started working on it, but quit Final cut, and when I double clicked on the Project (I Saved it to Mac HD) to open it, I only get the Browser and Viewer. Please forgive my ignorance, but help! I'm panicking because I don't know what to do!
17-inch Powerbook G4 Mac OS X (10.4.5)

How can I get my icloud videos not to show on my iphone

Before I downloaded the new iOS 7.02 on my iPhone 4s, only the videos I actually downloaded on my phone would show. Now all of the videos I have on icloud show. How do I get only the videos that I specifically put on my phone to show? I only want to see the ones I put on my phone not all of them. What can I do to stop them all from showing?

Settings | Video | Show All Videos

How can I get past Google answers to stop showing up in new searches?

Every time I type 'weather' in my Google search place, I get back, among other things, 'weatherford hotel' (in Flagstaff AZ, which I searched for ONCE). I don't want to see that result any more. Ever. How can I make that happen? There are tons of other examples.

Thanks. The box you indicate was never checked. So THAT wasn't 'it.' But I did find The Weatherford Hotel still in some very old History and removed it. Seems to have worked. Who knew?
Thanks again. Good-bye.

How can I get the client IP address correctly?

Hi,
I am having a problem with getting the client ip address correctly using jsp. I am currently using the method request.getRemoteAddr() (JSP)to get the remote client IP. This method works fine with intranet addresses.
However, when I am using a dial-up connection through a ISP (internet service provider), it could not detect the actual IP that is assigned to my client PC, but instead got another IP address.
Could anyone advise me on that? And could anyone advise me on how to obtain the correct client ip address correctly using any of the java technologies?
Thanks,
Damien

>
I don't believe so. You can't establish aconnection
over the internet using a private IP. As far as I
know most, if not all routers, block them so itwon't
even move over the backbone.Well with port-mapping it is definately possible to
allow an external ip to "connect" to an internal ip, i
have done this very thing myself...Not the same.
You are addressing the external server with a public IP address. That is then translated into the internal connection.
That is not the same as using a private IP on the internet.
As I said, the backbone will not let a private IP through.
>
>
Yes, but my point is that at any given time, in the
world, many boxes might have one address. Even ifit
is a private IP is it still that IP for aparticular
box. So if you use java to get its IP that is theIP
that it gets. And that IP is useless for anything
unless that IP is meaningful for the othercomputer.
But all ips must be unique in a designated "internet"
be it an "intranet" or whatever, there cannot be a
situation where two identical ips in the same
"internet", such that an ip that is achieved from a
page-hit is valid and meangingful in order to send the
data it is requesting back to it, or find out more
about that computer, or log and report it if it is
doing something illegal; i don't think its that
meangingless is it?Yes it is. You can't use an IP to uniquely identify a box, and that is the sole criteria, when there might be two boxes with the same IP.
When you use java on a client box to get the IP of the box, it doesn't necessarily return an IP that it meaningful to the anyone outside the lan on which the box lives.
Because of this internet systems must do one of the following:
-Do not use the IP as an identifier.
-Require that the client has a public IP. This is often static. At least some security systems use this to validate users.

My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

Basics from the manual are restart, reset, restore.
Try those

How can I get PPro CS6 timeline to correctly show clip stretched in AE?

Similar Messages

Maybe you are looking for