How can I get Quick VPN to use the correct DNS server IP

Right now it is defaulting to 192.168.x.1 (my RV042) I need it to default to 192.168.x.4 (Domain Controller). I need to be able to resolve names because remote users will have to log into the domain. I can not statically assign a DNS server on their machines because they are mobile, will be using WIFI hotspots and or/ wired LAN's at home.
The rv042 is obviously the router and server1 is the domain controller (also the DNS server for my LAN)
If I use nslookup to find a host it will default to the rv042 IP, so if I force the server IP in this case I get resolution with 192.168.x.4
C:\Users\XXXX>nslookup PC1 192.168.x.1
Server: rv042.xxxxxxxxxxxx.local
Address: 192.168.x.1
*** rv042.xxxxxxxxxxxx.local can't find PC1: Non-existent domain
C:\Users\XXXX>nslookup PC1 192.168.x.4
Server: server1.xxxxxxxxxxxx.local
Address: 192.168.x.4
Name: PC1.xxxxxxxxxxxx.local
Address: 192.168.x.5
C:\Users\XXXX>
Everything works right if I could just set my DNS server to .4. I came across many many posts from back as far as 2006 with poeple asking for this feature. What gives Cisco???

One of the first things to check in Mail Preferences, Composing:

Similar Messages

How can I configure Mac Mail to use the correct SMTP server?

I have successfully set up Mac Mail to use a new e-mail account. Inbound and outbound mail is working just fine. However, I am seeing something odd when I create a new message or reply to an existing message. The outbound account that shows is not that which has been configured for the account. I can manually select the correct outbound account.
What are my troubleshooting steps?

One of the first things to check in Mail Preferences, Composing:

I set up new phone (5) as a "new phone instead of backing up from icloud. How can I get back in to use the icloud backup? If I hit "delete account" does that just clear the new phone or does it get rid of my whole icloud account.

In the set-up process I clicked "set up as new phone" when I should have clicked "back up from icloud". I can't use itunes for the back up as it is not current. Is there a way to get back into setup? If I click "delete accout" in icloud management will it clear just my phone (so I can start over) or will it actually delete my icloud?

Settings>General, scroll to bottom of screen and tap Reset, choose to delete all data. Then attach to itunes and choose to perform a restore. You'll get the option to restore from icloud.

How can I get my touch to use the speakers attached to my desktop

I cannot get my Touch to play music through my desktop (Windows) speakers. The music only comes out thru the "Touch" speakers. Music is heard just fine thru a headset.

Thanks and now for one more questios have a new Volvo XC60 and sometimes the system will see my iPod, sync and play with no problem and then other times the car system will say "connect iPod" and I have not unplugged the iPod or changed any configuration. I do hear a beep from the iPod indicating that it has connected with the car system. Have read a few forum questions basically having the same problem but, only with and iPhone 4s.

Support- how can you get a question moved to the correct subject

Someone has posted in the Mac App Store when it's about iOS App store is there away i get this transferred? i know you must be a host but is there another way?

When you get to Level 2, you can report posts:
The reporting window lets you specify why the post is being reported:
That notifies the Host of the mispost and they handle the move, notifying the OP where to find their post after moving.
The point system and level priveldeges are covered in this Apple article:
Award points, level up, and earn new privileges

If I change a file name, how can I get DW to just change the name on server?

I've got a reasonable grasp of site management but I just changed a bunch of files to replace an uppecase letter with a lower case e.g. MyFile.jpg to myfile.jpg and DW doesn't manage that on the server.
I ended up canging my file names, syncing the folder, deleting the duplicates directly on the server and then uploadin the HTML page the images link to. Seemed like a long way of doing things in relation to the way DW manages everything else?
Regards
Maritn

Hello Beth
Thanks for that but it was rather what I wondered if I could avoid.
The problem arises because of trying to manage gallery images. I needed to change the name of a .jpg file and wondered if I could update the server without updating everything else. All my pages work OK and I needed to change several image names. I went through the images and changed them locally, and DW updates everything fine. So I synchronise the pages and would have just liked to have updated the image filenames without having to wait for the upload of just the image files which were the same.
Even as I'm typing that out I realise it would be a small miracle to expect DW to compensate for my own ceaseless laziness...
Martin

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How can we get a alert message in the current browser we are using the mom

how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AM

pauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way..

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Hi, 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Select the desired location in preferences, then consolidate the media files to it.
iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed. It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

How can i get a file header using this method cl_gui_frontend_services= gui

Hi Experts,
How can i get a file header using this method cl_gui_frontend_services=>gui_download
Thanks
Basu

Hi,
You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
TYPES: BEGIN OF ty_head, "Structure for header
             h(10) TYPE c,
             END OF ty_head.
DATA: it_head TYPE TABLE OF ty_head WITH HEADER LINE.
"Adding header details
it_head-h = 'Field1'.
APPEND it_head.
it_head-h = 'Field2'.
APPEND it_head.
it_head-h = 'Field3'.
APPEND it_head.
it_head-h = 'Field4'.
APPEND it_head.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = p_file
   filetype                        = 'ASC'
   write_field_separator           = 'X'
   header                          = '00' "<= note this
TABLES
    data_tab                        = it_tab
   fieldnames                      = it_head[] "<= Pass your header table here
EXCEPTIONS
   OTHERS                          = 1.
Hope this helps.
Regards,
Himanshu

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html

I tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

How can I get Quick VPN to use the correct DNS server IP

Similar Messages

Maybe you are looking for