How can I get quiz scripts to pull properly.... Using CP 6 with Infosemantics Drag & Drop Widget

I'm modifying a course which is composed of 4 mini-quizzes with each section having a results slide which gives you your cummulative score. This course was created by my predecessor. The course was previously published, loaded to our LMS, and used by new hires to test their knowledge and abitliy to locate information. In it's original state the course works and the Results slides score and coaching messages display as they should.
Now that I need to update the course, I've discovered that the first section was built using a Drag&Drop widget. I didn't make any changes to the section built using the widget. Unfortunately, the Results slide for this mini-quiz section has become a problem when the user gets a score of 0 or 10 points. Instead of getting a message that reads, "Keep Trying!" (0 points) or "You're Doing OK!" (10 Points) they get a "Perfect Score!" message.
Notice the scoring is correct for the section it's the messaging that's wrong. Since this is only happening with this one part of the quiz I'm assuming that there could be something wrong with the widegt.
Any input would be appreciated.

Rod Ward was very helpful in aiding in the fixing widgets that outdated due to a version update. However, this fix does note resovle my original problem. In short, the widget Drag/Drop was never the problem with the scoring/scripting issue. Can anyone give me insight as to why a course that has used by our learner population previously would stop functioning properly.
Reminder:
1. I made minor edits to the course in question. none of my edits impacted the section that is not functioning properly.
2. Currently, learners would get a "Perfect Score" script if they scored 0, 10, or 30 points. "Perfect Score", in this first section should only display at 30 points while 0 points should yield "Keep Trying" and 10 points should yield "You're Doing Ok" responses.
Any Thoughts!

Similar Messages

  • Installed office for mac (trial version). now I got 2 excel files, which cannot be deleted. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion(with win 7 parallel)

    now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)

    The people who make that stuff have their own forums you can also search/ask in:
    http://answers.microsoft.com/en-us/mac/forum

  • I updated my ipod touch 4th gen to ios 5 and lost all my photos. how can i get it back? i'm using windows 7.

    I updated my ipod touch 4th gen to ios 5 and lost all my photos. how can i get it back? i'm using windows 7. help please? thanks!

    This was the scenario:
    The first time I updated, it was only my music that was lost.
    When I got my music back, I lost my apps.
    When I got my apps back, my contacts, notes and photos were lost.
    Now I got back everything except for my photos.
    (Yes, I restored from backup several times since the first update.)
    Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
    Thank you.

  • Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

    Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
    Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

  • I accidentally Deleted the Mac app store from my computer. How can I get it back? I am using Yosemite on a MacBook

    I accidentally Deleted the Mac app store from my computer. How can I get it back? I am using Yosemite

    Another way is to open your Time Machine back up or clone (if you have one) and copy the App Store app from the /Applications to your Macintosh HD's /Application folder.
    Right click on the Time Machine icon in the Menu Bar.
    Select Enter Time Machine; then navigate to a date you know it was still there and copy if from the /Applications folder.

  • How can i get the speakers to work properly? they have a lot of static and scratchiness from them

    how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

    I found my answer in this thread:
    https://discussions.apple.com/message/16646999#16646999

  • How can i get the list of all tcode used by user of particular module

    Hi,
    How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
    Regards
    Vikram

    Login to your SAP System
    Run TCode SE16
    Type Table Name : TSTCT
    Press F7 Key (Table Contents )
    Go to Settings in menu bar
    Select User Parameters
    Under Keyword select Field Label and press green check mark
    Select your criteria in Data Browser and execute
    You will see all t codes in there
    Regards,
    Yogesh

  • How can I get rid of a music file use in a menu?

    How can I get rid of a music file use in a menu? I try to get rid of it from the menu inspector but although I delete it there, it is still in use by the menu!
    it is not inthe audio window in the menu inspector but is still in use! wiered!

    Click on the menu with the audio, then look in the property inspector, under the 'general' tab.
    Towards the bottom there is the list containing the audio file for the menu - click on the file and use the '-' button in the bottom left corner of the PI...

  • How can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2

    how can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2
    I have configure NFS, I need help configuring the share that I created in the Sun ZFS STOR ZS3-2 to connect with the OS X Open Directory

    Hi,
        You may  try checking the help page for ldap configuration :
    https://<Appliance_IP>:215/wiki/index.php/Configuration:Services:LDAP
    ZFS Storage supports LDAP, NIS, AD as directory service.
    Hope Open Directory is also based on LDAP and may work in similar fashion.
    Thanks
    Nitin

  • HT3965 my iPhone says Phone is disabled try again in 23,155,698 minutes, how can I get this deleted so I may use this is iPhone again?

    my iPhone says Phone is disabled try again in 23,155,698 minutes, how can I get this deleted so I may use this is iPhone again?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT201272 I am trying to buy 2 songs and I click on purchase i already have 50$ redeemed in my account but its not using that money its suggesting my debit card. How can i get my gift card to be used then?

    I am trying to buy 2 songs and I click on purchase i already have 50$ redeemed in my account but its not using that money its suggesting my debit card. How can i get my gift card to be used then?

    Hello there, AniChirglyan.
    The following Knowledge Base article talks a little about the purchasing order of items through the iTunes Store.
    iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    iTunes may still ask you for information from your card on file if that information has lapsed or needs updating. The card information on file has to be correct, no matter what purchasing option you will be exercising for this purchase.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Can you get an Apple ID for corporate use to associate with more than 10 devices?

    Can you get an Apple ID for corporate use to associate with more than 10 devices?

    I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
    Regards.

  • In MIRO, how can I get a credit to balance when using dr/cr lines?

    When processing a logistics invoice verification document via MIRO, we're trying to post a credit memo against a purchase order with muliple lines (one return, and on non-return line).  The value of the return line is greater, and the invoice is billing for receipts/returns on mulitple lines on the PO (it has a credit amount for the entire return to be posted against the return line, and a restocking fee to be posted against a text based PO line). 
    In MIRO, I have selected credit memo and am posting a credit for a gross amount of $550 in the header.  The return line I'm trying to post against is for $575, and the non-return line for the restocking fee is for $25.  However, when I'm posting against both, the system is indicating that I'm out of balance by $50.  It appears that it's not calculating the $25 as a credit.  I've tried looking at documents around posting against returns and posting credits, but haven't seen anything that addresses this scenario.  I've also tried using negative amounts, but SAP does not accept these.  We're currently using SAP ECC 6.0.  How can I get this to balance?

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • HT3529 How can I get dictation for my iPad for use with email and messaging

    How can I get dictation to use with messaging and email?

    Apple's dictation requires Siri, which requires a 3rd or 4th generation iPad (or iPad Mini).  See:
    http://support.apple.com/kb/HT5457
    Your post says you have a second generation iPad, so it will not have dictation.
    There are third party apps available that might help you.

  • I REALLY hate the page up/page down functions that automatically loaded with the program. I LIKE to use my page up/page down keys for web browsing. How can I get these keys to work properly, or any of the keys to work "normally" as I have in the past?

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

    When using certain keys on my keyboard, they don't work like they are "intended" to be used. I HATE how Firefox has changed those functions without my request. How can I get my keyboard to function as it "should"?
    Thank you.

Maybe you are looking for