How can I get the Elapsed Time express to output in milliseconds?

I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
Thanks in advance!

I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
Attachments:
Example_VI.png ‏4 KB

Similar Messages

How can I get the elapse time for execution of a Query for a session

Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.

Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL

How can I get the Date & Time to appear on my final project in iMovie11?

I am using iMovie 11 and have imported video from a Canon Vixia-HF21 camera. The EXIF data is imported along with the video but when I produce the final product, the date and time do not appear. How can I get the Date & Time data to appear on the final product?

There is a date and time Title you can use. If I recall correctly, it displays date plus hours and minutes, but not seconds.

How can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

how can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

Hello,
This question was answered under a different category, here is the link:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=5065000000050000004EBA0000&HTHREAD=000047694&UCATEGORY_0=_15_&UCATEGORY_S=0
Regards
Russell B.
National Instruments
Applications Engineering
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

How can i get the System Time from the other host

I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

Open a socket to port 13 and read a string with the time.
-or-
Open a socket to port 27 and read 4 bytes that are a network order timestamp
Assuming that your UNIX machine has those services running, most do

How can I display the elapsed time of the course using Advanced Actions in Captivate?

I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?

I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions

How can I see the elapsed time on imported video?

I'm trying to make a video in iMovie 11'. I would like to be able to view the elapsing time of the song I imported so I can match video footage with audio. With the older version of iMovie, I could see a time clock on the bottom of the video I was importing, so I could match the mouth to the lyrics.
In the older iMovie version, the entire audio would play when only part of the clips had been imported by me. Now with this version, the song stops playing when the clips stop. So partial completion of the video, doesn't allow a full time clock of the total song to allow me to match the voice on the audio with the film of someone singing.
In short, I can't find the running time clock for the video player in the project library.
Can you help me with thsi? The help menu has not anweered my questions.
Thanks.
Dave Demoise

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

How can I get the current time in Xcelsius?

I'm reading in an XML feed containing dates/times, and I'd like to do a calculation to see how old it is -- but I can't seem to access the current time in Xcelsius (=now() doesn't work -- it only calculates once, when the model is loaded).
I can get around that (a bit awkwardly) with a timer, but I'd also like to know what the user's current time zone is... Any ideas?

Hi,
Maybe you could use a web service to return the required information - you can feed the timezone to the web service.
Have a look at this:
http://www.earthtools.org/webservices.htm#timezone
http://markitup.com/WebServices/TimeZones.asmx?op=CurrentDateTime
Best regards,
Jacob

How can I get the run time of a method?

I click a button "draw" to invoke a method such as draw many shades.
It hangs a long time.
I want to get the information of how long it spent.
How can I do it?
I'm new guy, more detailed please .
one example would be much better
ThankS all :)

Try JAMon. It is much more flexible than currentTimeMillis() and easier to use.
import com.jamonapi.*;
drawShape()
Monitor mon=MonitorFactory.start();
..code being timed...
System.out.println(mon.stop());// prints time in ms.
}steve - http://www.jamonapi.com - a fast, free, simple performance tuning API.

How can I see the elapsed time in an imovie project

I am submitting a video for my national board teaching portfolio, and I need to reference certain things in the video at a certain time. How do I identify the time of a particular frame?

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

How can I get the logoff time of each db user from system view?

I can get the logon_date from gv$session.
Now,I want to get the logoff_date from some view or table.
I know that I will get it with trigger.
But,I am not will to user trigger for it.
Who can tell me which view or table will show the info?

But,I am not will to user trigger for it.Are you saying you are not willing to fire a trigger to gather this information?
I don't know of a table, if one exists, someone will know.
I say until you find a table, just write a SYSTEM TRIGGER on LOGOUT and place this information in your own table.
Eric

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

Connot get it to accept cookies; privacy settings are re-set each time after I change them. How can I get the privacy setting to stick and accept cookies?

I need to accept cookies to log into a technical site. I clear all cookies and the history and follow the instructions for setting privacy options to "Use custom settings for history" and to accept all cookies. When I go back to try logging into the site, it still tells me cookies aren't accepted. When I go back to Options-Privacy, the setting has been changed back to "Remember history" from "Use custom settings for history". I have done this about 5 times, trying various options, closing Firefox after making the change and starting it again - nothing works. How can I get the privacy settings to stay as I set them and accept cookies?

Blocking all cookies in Safari does not work. Deleted cookies will not stay deleted. There are numerous threads on this going back years, both in these forums and elsewhere. Many claim to have submitted the issue to Apple, but I have never seen anyone post a reply.
I have seen many suggested fixes that involve finding the cookies file, some including Terminal manipulations, and none seems to work universally. I can find noplace where Apple addresses this officially with an actual Apple-approved explanation or how-to.
Bottom line, your browser's security features should do what they claim: delete cookies. When they come back without ever even visiting another page, this is clearly not working in the way a reasonable user would expect.
Bottom line, Safari does not protect users' privacy in the way it pretends to and, after so many years of this issue, it appears that Apple wants it this way.
Having spent way too much time on this, I realize the choice is between Safari which is pretty well optimized; Firefox which is a lot pokier, at least for me; and Chrome, which I assume funnels personal information directly to Google.

How can I get the Elapsed Time express to output in milliseconds?

Similar Messages

Maybe you are looking for