How can I get the hardware acceleration in Thunderbird 31 off. ?

Hello
I use ZoomText 10 from Ai Squared, and keep getting the message that I need to disable the hardwertacceleration in Thunderbird to work the xfont well.
I did this already in Firefox 31. I can disable this nowhere in thunderbird 31.
What should I do to make it work well in Version 31 ?
Thanks in advance and excuses for mine poor language.
M. van Schaik
Netherlands

Matt, thank you very much for your help, Zoomtext works well again.
Martien.

Similar Messages

I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

For Windows see http://support.apple.com/kb/TS1538
For Mac OS X see http://support.apple.com/kb/TS1591

New iMac: how can I get the internal mic to turn off?

I always have Facetime cameras and internal mics disabled for privacy. Cameras are easy to block, but the Sound pane doesn't allow me to disable the mic, only turn the input down to the bottom. Supposedly, its off, right?
Poking around in Prefs, I saw that my supposedly "disabled" microphone showed a response in the Dictation & Speech pane VU meter when I would snap my fingers around the bezel. Even worse, it showed a response to conversation in another room, the refrigerator starting up in the kitchen 25 feet away, and even an increase in ambient noise. Going back to the Sound prefs, the mic input is still turned "down" and doesn't show a response when I snap my fingers.
So... how is it that this supposedly defeated mic is working normally, and in fact exceeding expectations, despite being effectively turned "off" in the Sound pane?
Basically, this iMac is a very expensive bug sitting on my desk. Is there a way to properly disable the mic in the system? I can't even find the thing to block it physically, like with bezel cameras. There is no place for an external mic to plug in either, which would physically bypass any internal mic on my previous Macs.

Interested parties may want to know...
I went to the Apple Store two weeks ago for a replacement Airport Express. While I was waiting for it, I struck up a conversation with one of the store staff, and brought up the mic issue. We spent a good ten minutes going through the few ways of securing the mic, and we determined that every iMac made has the ability to continue listening evne though dictation is shut off. Unlike old Macs, you can't disable the mic in the Sound prefs. You can't turn off listening in the Dictation prefs - even though turning off "dictation" means the dictation part of the OS stops listening. The only way to definintely shut off the "listening" part is to keep the Audio Devices panel open, select Built-in Microphone, and make sure the master mute button is checked. Also, you have to leave the Dictation & Speech pane open in Preferences to watch the mic display.
Even so, going to any other preference panel and then back to Dictation & Speech means that the master mute will uncheck itelf and the mic goes back to listening mode.
The staff member was quite frustrated by this and said it appears the only way to stop the iMac from listening with any certainty would be to block the mic, just like millions of users block the Facetime camera with a piece of tape.
I suppose I should admit defeat at this point, and maybe I should have long ago recognized that no matter what the system tells us, we shouldn't trust it. Simply clicking on a radio button to disable what in all actuality is really a room bug shouldn't have us letting out a sigh of relief and saying "Wow I'm glad I was able to stop that security issue by trusting the machine to let me know when it was listening."
In another year my Apple Care will run out. Then I'm going to take this iMac to my local authorized service center to have a hybrid drive installed and the internal memory maxed out. While they're in there, I'll have the mic physically removed.

How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
I have a few hundred computers running Adobe Flash Player.
The operation system is Windows XP.
They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash. You are left with no video signal to the monitor. Audio continues and the computer still responds to commands. This only happens when watching flash video.
We have tried:
Updating flash plugin (numerous versions)
Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
There seems to be two ways to work round this issue. One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows. The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
Doing either of these things allows the user to view flash videos with no apparent issues.
Is there a way to disable the hardware acceleration in Flash without visiting the PC? Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
Thanks in advance
Daniel.

Hi.
I have had over 200 views, and no suggestions as to how this could be fixed.
I have also posted in the general flash forum, that thread has fewer views.
If I should put this question in a different forum please let me know which one.
If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
Thanks.

How can i get the max rpm from cpu fan??

how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ?? please make things clear for me
thanks

if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
need more air get a different cooler/fan

How can I get the MAC address of my Apple TV?

How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
(to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
[http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/

How can I get the phone to recognize mini SD Card?

I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported. I purchased another SD Card and installed it however the phone does not recognize that I have an SD card. When I try and save music or pics to the card the phone says I have removed the storage. How can I get the phone to recognize the card storage?

First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it. If you pull the card out of the phone select Unmount first. You can also try formatting the card from the same settings menu. If these two things do not work, then either the card is defective or the card hardware slot is defective.

How can I get the serial Number of...

How can I get the serial Number of Table whether or the hardware and the serial Number Windows?

There most be a way, becouse if you will got to this game site:
http://en.dinorpg.com/ and try to register more then 3 times, you will get
an error that you can only have 3 acount on one computer. Even if you will
reinstall your windows version you still get the same error. If they can do
it so there most be a way.
2009/8/20 Greg Lafrance <[email protected]>
You can't access such info from Flex/AIR apps. There's just no way.
>
If this post answered your question or helped, please mark it as such.
>

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's Imac? I have a list of his passwords, but nothing works!

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
Thanks

Since that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.

I deleted a calendar tab. How can I get the data back?

I accidently deleted the calendar tab of my wife and deleted all her apoointments on her iphone and the iMac. I am in ****. How can I get the calendar data back=?

Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

How can we get the values from the view?

Hi All,
my scenario is i have two fields in my view .one is parameter.and another on is select-options.how can i get the user entered values into my selection screen.?
for the select options i get the values into field-symbol.for parameter i get the value using get_attribute.
can i use like this in select statement.
WHERE SERVICE_ID = ZSD_DD_AUFNRS
                   AND CRE_DT IN <FS_DATE>.
Regards,
Ravi.

Hi Sravan,
when i am using the below code to generate self defined functions i m getting a error .
*Generate an object for self defined functions
DATA: lo_self_functions TYPE REF TO if_salv_wd_function_settings,
*Generate an object for button 'Confirm'
       lr_button TYPE REF TO cl_salv_wd_fe_button,
       lo_self_function TYPE REF TO cl_salv_wd_function,
              l_text type string.
*Set Self-defined functions
*'Confirm' Button
lo_self_functions ?= l_value..
lo_self_function = lo_self_functions->create_function( 'CONFIRM' ).
CREATE OBJECT lr_button.
CLEAR l_text.
l_text = 'Confirm'.
lr_button->set_text( l_text ).
lr_button->set_image_source( '' ).
lr_button->set_image_first( 'X' ).
lo_self_function->set_editor( lr_button ).
Error when processing your request
What has happened?
The URL http://cgslsvr3.cgsl.com:8020/sap/bc/webdynpro/sap/zsdr_cash_work_list/ was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: IDs Can Only Contain Characters of Syntactical Character Set
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TOOLBAR_BUTTON==========CP
Method: NEW_TOOLBAR_BUTTON of program CL_WD_TOOLBAR_BUTTON==========CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEM of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: CT-0024 -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080414 -t: 105835 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How can i resolve it?
Regards,
Ravi

How can I get the hardware acceleration in Thunderbird 31 off. ?

Similar Messages

Maybe you are looking for