How can I get the readability bookmarklet to work
Firefox 3.6.8 in Windows XP Home on a Toshiba netbook. How can I get the "readability" bookmarklet to work? It works just fine in Camino on an Apple mini desktop computer running OS X 10.4.11 (Tiger.) Readability uses javascript, which I do have turned on. The problem (of it not working) doesn't seem to have anything to do with the NoScript add-on either, as I tried allowing everything on the page and it still didn't work. Any ideas of what to try next?
''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746624 here]''
Hi there.
By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Similar Messages
-
How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?
Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that. -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
Answer: to How can I get the reset button to work.
How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
//except the star, baclground, and reset button (trees and greeting REMOVED)
public function onClear(Event:MouseEvent):void
if (tree3) removeChild(tree3);
if (tree2) removeChild(tree2);
if (webText) removeChild(webText);
if (tree) removeChild(tree);
clickCount = 0;This is the answer to what to put in the onclear function.
-
How can I get the right click to work in firefox -- it works in internet explorer
how can I get the right click to work in firefox -- it works in interne
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
How can i get the pressure brush to work in Illustrator CS6?
how can i get the pressure brush to work in Illustrator CS6?
yes i do, a bamboo. and pressure works in photoshop
-
How can I get the contact book to work?
I cannot get the contact book to save any contacts. I have to enter each one each time.
Which given that I have to enter it in the contact book and cannot enter just the e-mail address, is really really irritating. The next time I open the contact book after sending the e-mail, there are no contacts.Hi there.
By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone. -
The number pad on by Mac USB keyboard does not work (no input). I have updated the Mac keyboard drivers and that did fix the problem. How can I get this keyboard to work when connected to my Powerbook?
Do you have "Mouse Keys turned on in System Preferences / Universal Access ?
Mouse Keys Turn on to use the keyboard instead of the mouse to control your computer -
How can we get the web cam to work with sykpe or any out going calls
can get the web cam to work with skype
Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Itunes has onced worked on my computer with previous settings. I was asked by Itunes to make a necessary update, which I did. Now Itunes will not work on my computer.
atoo2 wrote:
I just did the IOS8 update on my Ipad retina which had 300 photos it asked me to do an iCloud back up which i did but it deleted all my previous photos and now i only have recent photos how do i get back all my old photos? It said befor that my icloud was out of storage but i didnt know it didnt have my old photos, they arnt back up on itunes either is there any way I can get them back?
Please see the bold. If you're out of icloud storage, then you won't be able to backup to icloud unless you purchase more storage, but yet you said you backup to icloud.
If you really did backup to icloud no data would be loss - sounds to me that it didn't backup since you had no more free icloud storage space.
iCloud: iCloud storage and backup overview -
In the latest version of Firefox, I can't get the "Readability" website to work
This website is handy, because it converts online text into a format that is much more readable. To get it to work, you are to drag the "Readability" icon to the web browser's toolbar. This worked in the prior versions of Firefox, but not in the current one. This website works fine, for example, with Chrome.
You can find the toolbar Home button at the far right end of the Navigation Toolbar.<br />
If you do not see that button then click the "Restore Default Set" button in the Customize window.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
You can drag the Home button from its current position at the right to the position at the left of the location bar if you want that button in its old position.
* http://kb.mozillazine.org/Toolbar_customization -
How can I get the App store to work?
I cannot get my App store to work on OS 10.7.4 I don't know how I am going to upgrade with the new system. I thought the new up grade would help fix the problem, but now I don't know who to get the upgrade because my app store won't load. I am getting the screen that says
One Moment Please.
Connenction to the iTunes Store.
Loading...
If I tunes doesn't open, click the iTunew application icon in you Dock or Windows Task Bar. To download iTunes, Please click here.
I have tried sign off and back on. My iTunes works just fine. Only the App store doesn't work. I have tried the terminal message thing. I have tried to find my file. I bought Lion from the app store. PLEASE help I am so frustrated. I want to cry. When I as for help they send me to the boards to the support thing, but nothing on those pages have helped me. I know there are other post, but I don't know how to just dump eveything reload and then back up from my time capsule. How do I do that? I will that we could just reboot the App store.
ThanksIncase one is wondering... I found the answers in this entry
https://discussions.apple.com/message/18810192#18810192
I tired the
rm ~/Library/Preferences/com.apple.appstore.plist
rm ~/Library/Preferences/com.apple.storeagent.plist
rm -rf ~/Library/Preferences/ByHost/*
at first because the person was working out of lion but it kept saying not found, but I did everything else here next. I added the debug thing and didn't work but I didn't. Then I deauthorized my computer iTunes and reauthorized then signed in and out. Did not work. I then ran the permission part of Utilities and then ran the repair. after this I copied all three lines together pasted them into Terminal. After that it worked. I am so happy right now. I think I had to repair the disc to get it right. I wrote everything I did incase it was a combination of every thing.
This is how to enable the debug menu that is part of the thread.
Quit the Mac App Store
Launch the Terminal (located at /Applications/Utilities/)
Type the following command into the Terminal and then hit return:
defaults write com.apple.appstore ShowDebugMenu -bool true
Relaunch the Mac App Store, the Debug menu is next to “Help” in the menubar
So now to the interesting part: what me helped was to select "clear cookies" in the debug menu first, and second to select "reset Application"
This was all found in that thread, but it is 11 pages.... this might be more helpful. There are other suggestions in the tread if this doesn't work for you. -
I can`t download music from the new itunes ,it`s complacated ,and i would like to revert back to the older version . i`ve tryed over and over ,with no luck .just want to get back to the old easy way
Everything works the same in the new version as in the old version.
What happens when you try to download music? -
How can I get the reset button to work?
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at AddATree2/onReset()
Here is the code:
THERE IS AN ATTACHED .FLA AND 3 AS FILES, RESET, TREE, AND ADDATREE2
Appreciate your thoughts! w_sights
ADDATREE2.AS
/* AS3
Copyright 2008 __MyCompanyName__.
package
* Class description.
* @langversion ActionScript 3.0
* @playerversion Flash 9.0
* @author
* @since 19.05.2009
import flash.display.Sprite;
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.utils.Timer;
import flash.text.TextField;
import flash.text.TextFormat;
import flash.text.StyleSheet;
import Reset;
import Tree;
public class AddATree2 extends MovieClip {
// CLASS CONSTANTS
// CONSTRUCTOR
* @Constructor
public function AddATree2(){
reset.addEventListener( MouseEvent.CLICK, onReset ) ;
reset.buttonMode = true ;
reset.mouseChildren = false;
mcAdd.addEventListener ( MouseEvent.CLICK , onClick ) ;
mcAdd.buttonMode = true ;
mcAdd.mouseChildren = false;
//var reset_btn:reset = new reset();
// PRIVATE VARIABLES
private var clickCount:Number = 0;
// PUBLIC VARIABLES
public var reset:MovieClip = new MovieClip();
// GETTER/SETTERS
// PUBLIC METHODS
// EVENT HANDLERS
private function onClick ( evt : MouseEvent ) : void
clickCount++;
switch(clickCount)
case 1:
var tree = new Tree ( ) ;
addChild ( tree ) ;
tree.x = 430;
tree.y = 300;
tree.scaleX = .95;
tree.scaleY = .95;
var brickham:BrickhamScriptProBMP = new BrickhamScriptProBMP();
var fmt:TextFormat = new TextFormat();
fmt.font = brickham.fontName;
fmt.size = 58;
/*var regularText:TextField = new TextField();
regularText.autoSize = "left";
regularText.embedFonts = true;
regularText.defaultTextFormat = fmt;
//regularText.text = "Merry Christmas"
addChild(regularText);
var css:StyleSheet = new StyleSheet();
css.setStyle("p", {fontFamily:brickham.fontName, fontSize:78,color:"#FFFFFF"});
//css.setStyle("a", {textDecoration:"underline"});
var webText:TextField = new TextField();
webText.autoSize = "left";
webText.embedFonts = true;
webText.styleSheet = css;
webText.htmlText = "<p>Merry Christmas</p>";
webText.x = 52;
webText.y = 41;
addChild(webText);
break;
case 2:
var tree2 = new Tree();
addChild(tree2);
tree2.x = 175;
tree2.y = 450;
tree2.scaleX = .65;
tree2.scaleY = .65;
break;
case 3:
var tree3 = new Tree();
addChild(tree3);
tree3.x = 45;
tree3.y = 365;
tree3.scaleX = .45;
tree3.scaleY = .45;
break;
/* case 4:
var tree4 = new Tree();
addChild(tree4);
tree4.x = 660;
tree4.y = 195;
tree4.scaleX = .25;
tree4.scaleY = .25;
break;
//mcAdd.removeEventListener ( MouseEvent.CLICK , onClick ) ;
// PRIVATE & PROTECTED INSTANCE METHODS
/*reset_btn.addEventListener(MouseEvent.CLICK, resetButton);*/
function onReset(event:MouseEvent)
var webText:TextField = new TextField();
var reset:MovieClip = new MovieClip();
reset.x = 450;
reset.y = 500;
reset.scaleX = .01;
reset.scaleY = .01;
addChild(reset);
stage.addEventListener(MouseEvent.CLICK, removeWebText);
var tree = new Tree();
removeChild(tree);
var tree2 = new Tree();
removeChild(tree2);
var tree3 = new Tree();
removeChild(tree3);
public function removeWebText(event:MouseEvent):void
var webText:TextField = new TextField();
var fmt:TextFormat = new TextFormat();
removeChild(webText);
TREE.AS
package
import flash.display.MovieClip;
import flash.events.Event;
public class Tree extends MovieClip
function Tree()
addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
private function onAddedToStage ( evt : Event ) : void
width = stage.stageWidth ;
height = stage.stageHeight ;
RESET.AS
package
import flash.display.MovieClip;
import flash.events.Event;
public class Reset extends MovieClip
function Reset()
addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
private function onAddedToStage ( evt : Event ) : void
width = stage.stageWidth ;
height = stage.stageHeight ;Hello:
Thank you for responding so quickly.
I have added child and it has removed the error. However, the button icon has disappeared as you can see when you play the .swf and the reset button doesn't clear the stage of everything but the star and the back ground.
See new code:
/* AS3
Copyright 2008 __MyCompanyName__.
package
* Class description.
* @langversion ActionScript 3.0
* @playerversion Flash 9.0
* @author
* @since 19.05.2009
import flash.display.Sprite;
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.utils.Timer;
import flash.text.TextField;
import flash.text.TextFormat;
import flash.text.StyleSheet;
import Reset;
import Tree;
public class AddATree2 extends MovieClip {
// CLASS CONSTANTS
// CONSTRUCTOR
* @Constructor
public function AddATree2(){
reset.addEventListener( MouseEvent.CLICK, onReset ) ;
reset.buttonMode = true ;
reset.mouseChildren = false;
mcAdd.addEventListener ( MouseEvent.CLICK , onClick ) ;
mcAdd.buttonMode = true ;
mcAdd.mouseChildren = false;
//var reset_btn:reset = new reset();
// PRIVATE VARIABLES
private var clickCount:Number = 0;
// PUBLIC VARIABLES
public var reset:MovieClip = new MovieClip();
// GETTER/SETTERS
// PUBLIC METHODS
// EVENT HANDLERS
private function onClick ( evt : MouseEvent ) : void
clickCount++;
switch(clickCount)
case 1:
var tree = new Tree ( ) ;
addChild ( tree ) ;
tree.x = 430;
tree.y = 300;
tree.scaleX = .95;
tree.scaleY = .95;
var brickham:BrickhamScriptProBMP = new BrickhamScriptProBMP();
var fmt:TextFormat = new TextFormat();
fmt.font = brickham.fontName;
fmt.size = 58;
/*var regularText:TextField = new TextField();
regularText.autoSize = "left";
regularText.embedFonts = true;
regularText.defaultTextFormat = fmt;
//regularText.text = "Merry Christmas"
addChild(regularText);
var css:StyleSheet = new StyleSheet();
css.setStyle("p", {fontFamily:brickham.fontName, fontSize:78,color:"#FFFFFF"});
//css.setStyle("a", {textDecoration:"underline"});
var webText:TextField = new TextField();
webText.autoSize = "left";
webText.embedFonts = true;
webText.styleSheet = css;
webText.htmlText = "<p>Happy Happy</p>";
webText.x = 52;
webText.y = 41;
addChild(webText);
break;
case 2:
var tree2 = new Tree();
addChild(tree2);
tree2.x = 175;
tree2.y = 450;
tree2.scaleX = .65;
tree2.scaleY = .65;
break;
case 3:
var tree3 = new Tree();
addChild(tree3);
tree3.x = 45;
tree3.y = 365;
tree3.scaleX = .45;
tree3.scaleY = .45;
break;
/* case 4:
var tree4 = new Tree();
addChild(tree4);
tree4.x = 660;
tree4.y = 195;
tree4.scaleX = .25;
tree4.scaleY = .25;
break;
//mcAdd.removeEventListener ( MouseEvent.CLICK , onClick ) ;
// PRIVATE & PROTECTED INSTANCE METHODS
/*reset_btn.addEventListener(MouseEvent.CLICK, resetButton);*/
function onReset(event:MouseEvent)
var webText:TextField = new TextField();
var reset:MovieClip = new MovieClip();
reset.x = 450;
reset.y = 500;
reset.scaleX = .01;
reset.scaleY = .01;
addChild(reset);
stage.addEventListener(MouseEvent.CLICK, removeWebText);
var tree = new Tree();
addChild(tree)
var tree2 = new Tree();;
addChild(tree2);
var tree3 = new Tree();
addChild(tree3);
removeChild(tree);
removeChild(tree2);
removeChild(tree3);
public function removeWebText(event:MouseEvent):void
var webText:TextField = new TextField();
var fmt:TextFormat = new TextFormat();
addChild(webText);
removeChild(webText);
===============
TREE.AS
package
import flash.display.MovieClip;
import flash.events.Event;
public class Tree extends MovieClip
function Tree()
addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
private function onAddedToStage ( evt : Event ) : void
width = stage.stageWidth ;
height = stage.stageHeight ;
RESET.AS
package
import flash.display.MovieClip;
import flash.events.Event;
public class Reset extends MovieClip
function Reset()
addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
private function onAddedToStage ( evt : Event ) : void
width = stage.stageWidth ;
height = stage.stageHeight ; -
How can I get the dictionary feature to work with firefox?
I haven't been able to get the dictionary to pop up using the three-finger double-tap in Firefox. Is there is a fix for this?
Download and install magicPrefs (for free) and do this:
My guess is that there are problems with gestures yet to be worked out. One problem I see is that users don't wait long enough, or try hard enough (ha!) when using them. My guess is that when the machine is busy (indexing, rendering, etc.) that the gestures get hosed, but I am not a developer...so just a guess
Maybe you are looking for
-
Using Java Reflection to call a method with int parameter
Hi, Could someone please tell me how can i use the invoke() of the Method class to call an method wiht int parameter? The invoke() takes an array of Object, but I need to pass in an array of int. For example I have a setI(int i) in my class. Class[]
-
My program runs without problems but when I tried to use the -Xprof flag when running my program it crashes consistently. As soon as the program starts and the GUI displays the entire GUI is unresponsive. Since none of the menus or window buttons wor
-
Any thoughts!?
-
Thinkpad A31p doesn't recognize HDD
Hello, I'm new to the form. A friend has this Thinkpad A31p with no HDD. He got a new WD-120gb ATA-6 from Newegg. We don't know if this drive is compatible. He wants to install XP on it but the computer doesn't recognize it. He doing this from scratc
-
Hi, all Does have some function can pick number from string. For example: I have a string like this " **** ** 123 **** ** 45 *** ** 678 *** **", I want to extract the first number (123) from the string. is there any functions in labview to result ? M