How can I get the Tektronix 754c instrument drivers to work in LabVIEW 5.0? I am getting a LabVIEW load error code 9.

I am running Windows 98 on a laptop. AFter downloading the drivers for LAbVIEW 5.x and trying to open the VI tree in LabVIEW 5.0, I obtain the error message for about three of the VIs. One of them is the initialization VI.

I tried the same driver in Labview 6.1 and Win2K and didn't get any errors. One possible solution might be to use the IVI driver for the TDS754D. The command set should be almost identical, but if the driver queries for the model number it might complain.

Similar Messages

  • How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

    How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

    Right click - get info.

  • How can I download the English version of Firefox? I'm in Sweden and I only get the Swedish version offered.

    I want to install Firefox 8.0 on my computer. I'm located in Sweden and I only get the Swedish version offered when I follow the download link. I've tried to search for other language versions, but I can't find any links to alternative downloads.

    '''''Swarnava's''''' link will most likely get you the localized language version based on your physical location.
    Download from the following to choose your OS and interface language:
    *https://www.mozilla.org/en-US/firefox/all.html
    *Also see: http://support.mozilla.com/en-US/kb/Installing+Firefox
    *Also see: https://support.mozilla.com/en-US/kb/Basic+troubleshooting#Clean_reinstall
    **When uninstalling Firefox, be sure during the uninstall procedure that the box to "remove your personal information" (bookmarks, passwords, etc.) is NOT checked.
    **Also see: http://support.mozilla.com/en-US/kb/Backing+up+your+information
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How can i control the Tektronix AFG3022 with LabView 7.0

    I am trying to control the Tektronix AFG3022 Function Generator with LabView 7.0. Is there a premade program I can download and use?

    If it is not in 7.0 make new thread and ask nice if someone can convert to labview 7.0.
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • How can I improve the speed of my VI to work in real-time at higher sample rates?

    I am currently trying to implement a multi-channel control system, the vi of which is attached. It effectively consists of a number of additions and multiplications in the processing subvi (also attached), however, for 7 inputs and 7 outputs I cannot get it to work at sample rates higher than 3kHz without experiencing an overwrite error. Does anyone have any tips as to how I can get the processing to work more efficiently such that I can get it to work at higher sample rates?
    Attachments:
    Simul_AIAO_Buffer(Two_Boards)_control_FXLMS_for_1_leaky_no_SCXI.vi ‏128 KB
    FXLMSsub_leak_v2.vi ‏70 KB
    filtered_ref_1_chan.vi ‏39 KB

    Hi mattwilko,
    I believe the first issue that you should address is the building of arrays.
    This is mainly happening on the edge of your loops.
    This is my reasoning.
    Allocating memory in RT to handle an array that is growing will blow away your determinism.
    I would suggets pre-allocating all of your storage and work with the data in-place.
    In LV 7.1 there are some great new tools that will help nail down issue of this type.
    If you have LV 7.1 you may want to upgrade so you can take advantage of the new tools.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I sort the bookmarks menu? Sorting only works in "organize bookmarks", doesn't apply to the menu.

    I want my bookmarks to be listed alphabetically. I can select "sort by name" or "sort A-Z" under the Organize Bookmarks tab, but my choice applies to the Organize Bookmarks list only; when I open my Bookmarks menu, it remains unsorted. How can I apply my sorting preference to the actual Bookmarks list?

    The Views menu in the Bookmarks Manager (Bookmarks > Organize Bookmarks) is for displaying the bookmarks in different sorting orders (hence the name Views) and doesn't sort bookmarks permanently.
    Right-click a folder to open the context menu and choose "Sort By Name" in the left pane of the Bookmarks Manager or in the side bar to sort the bookmarks alphabetically or drag bookmarks to the wanted position. If dragging doesn't work then use Cut and Paste instead.
    You may have to close (Firefox> Quit) and restart Firefox to make changes appear in the Bookmarks menu because on Mac that menu is maintained by the OS and not by Firefox.
    * SortPlaces: https://addons.mozilla.org/firefox/addon/sortplaces/

  • Satellite P200-1K8 - Can't get the display and sound drivers to work

    Hi.
    I'm getting desperate. I tried everything I could imagine.
    First - don't get the catalyst control center to work, I only have the graphic driver installed now (tried both - the one from Toshiba and with Mobility Modder modified ATi driver - none works.
    Second - when I install the sound driver the Realtek sound manager is encoutering the problem and must close every time at startup. And yes, I did update the BIOS to ver. 5.20, installed XPSP3, installed chipset driver (newest from Intel homepage or the one from Toshiba, no matter which, always same issue).
    Please help. I don't want to spend rest of my life trying to get XP onto my laptop.
    Thanks in advance.

    So I did check the BIOS version again and it is 5.40 indeed. Then I installed the updates from Microsoft that were downloaded when Iwas away. I think that was mistake. Errors, errors, malicious software (and there were only some codecs and players installed yet). So I reformated and reinstalled the Windows and drivers except audio driver.
    According to MS (http://support.microsoft.com/kb/835221/en-us & http://support.microsoft.com/kb/888111/en-us) the patch KB888111 is the updated KB835221 and before installing it, the KB835221 should be uninstalled. So I tried to install the KB888111 only and got Error message: Setup has detected that the Service Pack version of this system is newer than the update you are applying. It seems that I don't need to install these patches since I have XPSP3.
    So I installed the sound driver again and in Device manager everything seems to be OK. I only have this annoying message at every startup: Realtek Voice Manager encountered a problem and must close. What is this Voice manager anyway? And any other solution? I didn't install the camera yet. I think it won't work again.
    Any new ideas?
    Thank you all.

  • Im getting the following Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support

    I'M GETTING THE FOLLOWING ERROR
    Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support

    Error downloading Creative Cloud applications

  • Inside the browser, right click on the mouse seems to be disabled. How can I enable the right click button? It works fine on toolbars and tab bar but not inside tabs or windows. I would like to be able to copy and paste and such. Thank you

    Right mouse button does not open any menu when clicked inside of tabs or windows. Works properly on the toolbars, in the address line, search bar...etc. but has no action on the page I'm browsing. I purchased a mouse recently and like the old one, the right button works in all other areas of my operating system. I would like to know if there is a setting in firefox that I can change to correct this.

    There are also websites that can disable the right-click context menu.
    See Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
    [ ] "Disable or replace context menus"
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r42
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • How can I change the Fn keys so they would work for Itunes too?

    When I want to do PAUSE on the keyboard I press Fn + down arrow and it only works with Media Player, how to change it it will work also on iTunes?

    Hi,
    Are you using the Birthday Calendar as selected in iCal's preferences? For me this gives an alarm on the day at 8am.
    Best wishes
    John M

  • How can I fix the paste function that just stopped working

    Paste function just stopped working.  Tried restarting, but still doesn't work.

    I had this problem as well. It also manifested itself as drag-n-drop not working in Mail. I checked the Console and saw a line about "CoreDragCreate error: -4960".
    A Google search for that revealed some details about the "Pasteboard" server that handles this stuff possibly not running.
    I restarted my machine and it worked correctly. You might verify in the Activity Monitor that you have "pbs" running.

  • How can I set the value to a session bean from backing bean

    Hi Experts,
    How can I set the value to a session bean from backing bean where I have created getter and setter
    methods for that variable.
    Basically I am using ADFUtils class where I am able to get the value from session bean
    using following expression
    String claimType =
    (String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
    Thanks
    Gayaz

    Gayaz,
    Wrong Post !!
    Post in JDeveloper and ADF
    Thanks
    --Anil                                                                                                                                                                                                                               

  • New computer with ipad2. old computer broken.how can i backup the data?

    old laptop broken. how can i input the data to new labtop with new itune?

    Are you able to get the hard drive from the old computer? if so then your can install the drive in a external enclosure and transfer the data to your new computer. 

  • How can i compare the character fields?

    I have a requirement to compare the character fields .
    I have to compare the 2 character fields of a table CDPOS
    As follows .
      If CDPOS-VALUE-OLD  GT  CDPOS-VALUE-NEW
          Populate    REDATED = ‘YES’.
    ELSE
          Populate  REDATED = ‘NO’.
    My doubt here is how can we compare the character fields.?
       When I do Extended Program Check: I am getting error like this ?
    Greater than/less than comparisons with character type operands may not be portable
    Please give me idea .
    Thanks ,
    Suresh Kumar.

    Hi suresh,
    DATA : a TYPE char10  VALUE 'DBCD',
           b TYPE char10  VALUE '4234',
           c TYPE char10  VALUE '3456',
           d TYPE char10  VALUE 'ADA',
           e TYPE char10 VALUE  '234567'.
    IF b GT c.        "this case checks for numeric values
      WRITE :/ 'B is bigger'.
    ELSE.
      WRITE :/ 'C is bigger'.
    ENDIF.
    IF a GT d.      "this case checks for alphbetical order
      WRITE :/ 'A is bigger'.
    ELSE.
      WRITE :/ 'D is bigger'.
    ENDIF.
    IF strlen( a ) GT strlen( d ). "this case checks for no of chars
      WRITE :/ 'A is bigger'.
    ELSE.
      WRITE :/ 'D is bigger'.
    ENDIF.
    IF a GT c.      "this case first alph then numerics
      WRITE :/ 'A is bigger'.
    ELSE.
      WRITE :/ 'D is bigger'.
    ENDIF.

  • How can i know the port of my database?

    hello,
    how can i know the port of my database is working in?
    ty

    user11933068 wrote:
    I don't know how to do this, sorry
    :-(TNSNAMES.ORA is used by the client to resolve an alias to an actual server/listenr port/db service name.
    TNSNAMES.ORA is found, by defualt, on the client machine at $ORACLE_HOME/network/admin
    Here's how it works:
    Suppose I have this in my tnsnames.ora:
    fubar =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = btzlkfp)
      )So, my connect string would look something like this:
    $> sqlplus scott/tiger@fubarTNS will take the name 'fubar' and look it up in the tnsnames file. In my example, it will then route the connection request to 'myhost' (using other net services to resolve that to an actual IP address), and place the request on port 1521 at that server. The listener will pick that up and see that scott wants to log on to database 'btzlkpf'.
    There's more, but at this stage I want you to understand the connection between what you enter for your connect string and the database itself.

Maybe you are looking for