How can i get the trace file

Hi,
I wanted to check the trace file to make sure that there is no login attempts happend through the forms with wrong username and password.
how can i enable the trace file , where i have to write the commands and where i can see the trace file.
I'm using oracle forms 6i
could anybody help me.
thanks
Bcj

This link is all about forms 9i, i'm working on forms 6i. but i have tried with following values
TRACE_LEVEL_CLIENT=16
TRACE_UNIQUE_CLIENT=TRUE
TRACE_FILE_CLIENT=Test
TRACE_DIRECTORY_CLIENT=c:\orant\net80\trace
in sqlnet.ora file and it created a trace file whenever it connected to database through the on_logon trigger.
if the username or password is invalid then the validations raise the form_trigger_failure exception. so there was no trace file. so i was unable to get the trace file to see the invalid login attempts.
Thanks

Similar Messages

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

How can I get the lesson files for Aperture 3.2.4?

How can I get the lesson files for Aperture 3.2.4?

They are only available on the original Installer dvd with the boxed retail version.
But you can easily use your own photos to try out the tutorial videos. The videos are linked on the Aperture Support page.

When I move a RAW file from IPhoto to my desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file across?

When I move a RAW file from IPhoto on my macbook pro to desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file to move across?

I create separate folders based on the year and then the actual date of when I take images. You can make those folders anywhere on any hard drive that is connected to your Mac whether internal or external. I also use the Photoshop Photo Downloader that is included with Photoshop/Bridge and it will create the date folder so all I do is create a Year folder.
Open Bridge or click on the Bridge icon in PS and in the File menu item in Bridge select "Get photos from Camera". It can be a camera connected to your Mac or a memory card from a camera. A window will open and you then select the camera or memory card. Set the location they will be downloaded to, just the folder and you can Browse to a folder that you created, then in the "Create Subfolders drop down select what date stamp you want to use or or custom name or not to create subfolders at all.
I've never cared for iPhoto one bit. I tried it but found it way to restrictive. It likes to have full control over how you interact with your images.

Teststand 1.03 - How can I get the sequence file path into an expression?

The sequence file will be located at different locations on different computers. I need the base address of the sequence file to get to the correct limits file. How can I get the sequence file path into a string-local expression.
Thanks

As Ray described, the FindFile expression function and TS API method will seach all TS search directories and return to you the path of your file, assuming the file is located in the search directories.
If you just want the path of a TS file that you have a reference to then there is a faster, easier method. You can use the Path property of the PropertyObjectFile class. In the attached example I use an AcitiveX Automation adapter step to call Path on the property RunState.SequenceFile. This returns the path to the current executing sequence file. Note that if you have not yet saved the sequence file then the path will be empty. In a subsequence step I strip off the file name leaving the root path of the file.
Attachments:
GetSeqFilePath.seq ‏22 KB

I lost all of my document saved in my previous adobe after I upgrade the itunes, how can I get the lost file?

I Lost of my document saved in my previous adobe after upgraded itunes, can I get the lost file again?

Would you provide more information so that we can troubleshoot the problem?
Are you saying that your PDF documents on your iPad/iPhones are lost because you updated Apple iTunes (not Adobe Reader)? Do you see anything in the Documents or Recents section of the Adobe Reader home screen?

How can I get the lib files which supported jsf?

In one book , That introduce me to get the lib files from a jsf folder ,after you install the jwsdk1.3 ,now ,I installed the 1.5,but I cann't find this jsf folder.where I can get these lib files ? Thanks very much.

Try data rescue or some other program. However, before proceeding turn off TM and avoid that muck up the next time you connect. AFAIK, however, it shouldn't have happened without a dialog box popping up allowing you to not use it for TM.
See Pondini's TM FAQs for more information..

How Can I get the Jar file path ?

I have an aplication in a Jar file. This application might be situated in any directory.
I would like to know programatically the path where it was installed.
Is there any way to know this simple thing in Java? I cannot believe that there is not a function like System.getProperty("user.dir") for this as System.getProperty("user.dir") will always return the directory from where the Java VM was lauched!
Thank you!

You can get the location with:
URL codeBase = getClass().getProtectionDomain().getCodeBase().getLocation();But as has been pointed out, it's probably better to specify the directory to store these files some other way, e.g. use a batch file or shell script to launch your program and make it the cuirrent directory, or put the directory in as a property or command argument.

I have a Power MAC 7200. It's hardware is failing. How can I get the old files off, so I can use them on a PC? This system will save to a 3.5 inch floppy disk.

My Power Mac 7200 is failing. I would like to be able to use old reports on my PC. How can I transfer them?
The Mac will save files to a 3.5 inch floppy disk.

You could write the files to a PC formatted floppy, you might be able to do File Sharing from it to the PC with an Ethernet cable.
How bad off is the 7200? Can we maybe fix it?

How can I get the video file to run correctly?

To try to make a long story short, I was recording video using a capture card and adobe premiere and I ran out of room on the HDD and adobe premiere shut the recording down by its self, leaving me with a file that is right around 51gb in size (so i assume there is something in that file). But the thing is even though the file says its an avi file, ever program iv used to try to fix the file says it doesnt recognize the file as an avi file. I was wondering if there is a way to salvage the video file or am i stuck with a lead (51gb) weight of a file? if so, ill just delete it, but i would much rather get the file fixed... its the only copy of the video file that i have so it would be a realy wonderfull thing that i get the file fixed.

One product that I have used, when there is a poorly formed AVI header is Digital Video Repair (cannot recall if it is freeware, or shareware), BUT it is likely that your file's header was NEVER written, so no amout of "repair" will succeed. Still, might be worth a try?
With many AVI's, the header often comes first, where with some other formats, like MPEG-2 and WMV, the header is the last part of the file. Could be that the header of the AVI is just incorrect, such as with the Duration. Only a test will determine if you can repair the file.
Good luck,
Hunt

How can I get the old file and bookmark back on the top left cnr.?

I had to download FF as I had to do a reinstall for win 7. Now my old bar that had "file, to bookmarks"
Is gone and I want it back! Also I had some icons below my Google start window, gone now, in fact I cannot find Google or Yahoo in the upper right corner. Also I DO NOT want all the add-ons. Every time you guys upgrade it gets worse. Can you not have a download site just for old buggers like me??

See this about the Menu Bar. <br />
https://support.mozilla.org/en-US/kb/display-firefox-button-menu-instead-menu-toolbar#w_ive-tried-it-and-i-want-to-go-back

Hi...i planned to install windows xp on my macbook pro OS 10.8.3..is it compatible with my mac?if so,how can i get the windows file?

and i planned to use VMware...

If you are using a Virtual Machine like Vmware you should check with Vmware to see what versions of Windows run in their virtual machine. It is not Windows that has to be compatible with your Apple computer when using a virtual machine, it is the virtual machine version that must be compatible.

How can I get a ai. file? I've made a drawing for a company who would like to use it on a shirt. But they need the ai file. I made it with adobe illustrator for ipad.

How can I get the ai. file? I've made a drawing for a company who would like to use it on a shirt. But they need the ai file. I made it with adobe illustrator for ipad.

Unfortunately logging into your account won't help, because then I don't have access to Illustrator.
I was just trying around a little if you could share it with me, but unfortunately sharing doesn't seem to work with Draw files. You could try and find someone near you who also has an iPad and Illustrator and then try to send it to them via AirDrop. But I don't know if that actually shares the file or just a PNG.
Maybe someone on the Draw forum has an idea how you could send the file to someone else.
Adobe Illustrator Draw

How can I get the directory.xml file for WL6.0?

I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?

aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM

How can I get the photos from my old icloud backup on to my computer?

I got a replacement phone and now there are 2 iphone backups. There's the old phone with the pictures on it I would like to put on to my windows 8 pc. I can't figure out how to get them. I can't restore them to my iphone because I already have another file in icloud for that. How can I get the old file with my pictures on to my computer??

You can only access them by restoring the backup to your phone. You can backup your phone (such as by backing it up to your computer using iTunes), restore the old backup, transfer the recovered photo to your computer (iOS: Import personal photos and videos from iOS devices to your computer), then restore the backup you made earlier to return your phone to its current state.

How can i get the trace file

Similar Messages

Maybe you are looking for