How can I get the video window to disappear?
Placing video in a InDesign CS6 file, exporting as an interactive pdf. The video plays fine but when it is finished playing a black box replaces the video. How do I get the video window to disappear after video finishes playing? BYW, using the No Poster option in InDesign.
When the video finishes playing in an interactive PDF, it shows the last frame of the video. The last frame of your video is probably black.
There is no way to get the video window to disappear if it's embedded in the page, sorry. You could change the last frame to white, however.
Similar Messages
-
How can i get the video if I go on tv5 news for the moment it doesn't work!
How can I get the video if I go on tv5 news? for the moment it doesn't work!
thank you very much, I am sorry but I don't know what all this is!! I am a new apple user ... comming from PC ! I go on internet to view the news and the video doesn't appear so I suppose, like on my computer that there is something that I have to download to make it work!
-
Premire only import audio in a .mov file, how can i get the video?
premire only import audio in a .mov file, how can i get the video?
Wild Guess:
If that is not the solution:
FAQ: What information should I provide when ask... | Adobe Community -
I have a sony hdd camcorder, how can i get the videos from it to my macpro?
I have a sony hdd camcorder, how can I get the viedos from the camcorder to the macpro?
If you have iMovie it can import video from most camcorders, but not all. It comes with every Mac Pro. If you need to restore it from the original installer discs, these are the directions:
http://support.apple.com/kb/HT2604
Typically iMovie can import if you connect via IEEE 1394 or USB. IEEE 1394 comes in three flavors:
4 pin (typical for many camcorders), 6 pin (known as bus powered Firewire 400), 9 pin (known as Firewire 800 or 1394b). Cables exist to connect each type of Firewire to each other. Locate your Camcorder directions on Sony's website to determine what pinout exists if you don't have the manual.
Double check on Sony's website there isn't a firmware update for compatibility with your operating system.
Push comes to shove, you may have to install Windows on your Mac to connect the Camcorder. -
I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?
FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al -
I liked how FireFox used to have a downloads window when I would download. But, now its like som sort of add-on, it's at the top right and I dont like it very well. Can I get the window back somehow? Thanks, Lego893.
There is a way, but it may not be supported for ever... If you want the old download manager back, go to about:config, click the I'll be careful, I promise! button. Then search for "download", and set the browser.download.useToolkitUI preference to true (double-click it).
-
How can I Get the Active window
I used the following code.. but i didn't get activewindow..
int hwnd = OS.GetDesktopWindow();
it returns value and working..
but
int hwnd = OS.GetActiveWindow();
it returns 0 only.. i didn't get correct value...
how can i get Activewindow .... is there any alternate method....
import java.awt.image.*;
import javax.imageio.*;
import java.awt.Rectangle;
import java.lang.*;
import org.eclipse.swt.*;
import org.eclipse.swt.graphics.*;
import org.eclipse.swt.internal.win32.*;
import org.eclipse.swt.internal.*;
import org.eclipse.swt.widgets.Tracker;
try
//in hwnd=OS.GetDesktopWindow();
int hwnd =OS.GetActiveWindow();
System.out.println(hwnd);
RECT clientRect= new RECT();
POINT pt1 = new POINT ();
POINT pt2 = new POINT ();
OS.GetClientRect(hwnd, clientRect);
pt1.x = clientRect.left;
pt1.y = clientRect.top;
pt2.x = clientRect.right;
pt2.y = clientRect.bottom;
System.out.println(clientRect.left);
System.out.println(clientRect.top);
System.out.println(clientRect.right);
System.out.println(clientRect.bottom);
OS.ClientToScreen (hwnd, pt1);
OS.ClientToScreen (hwnd, pt2);
clientRect.left = pt1.x;
clientRect.top = pt1.y;
clientRect.right = pt2.x;
clientRect.bottom = pt2.y;
System.out.println(clientRect.left);
System.out.println(clientRect.top);
System.out.println(clientRect.right);
System.out.println(clientRect.bottom);
if((clientRect.right!=0)&&(clientRect.bottom!=0))
BufferedImage screencapture = new Robot().createScreenCapture(new Rectangle(clientRect.left,clientRect.top,
clientRect.right,clientRect.bottom));
File file = new File("screencapture.jpg");
ImageIO.write(screencapture, "jpg", file);
System.out.println("Image Saved Successfully");
else
System.out.println("Failed");
catch(AWTException ae){}
catch(IOException ie){}This is not SWT forum.
-
How can I get the video file to run correctly?
To try to make a long story short, I was recording video using a capture card and adobe premiere and I ran out of room on the HDD and adobe premiere shut the recording down by its self, leaving me with a file that is right around 51gb in size (so i assume there is something in that file). But the thing is even though the file says its an avi file, ever program iv used to try to fix the file says it doesnt recognize the file as an avi file. I was wondering if there is a way to salvage the video file or am i stuck with a lead (51gb) weight of a file? if so, ill just delete it, but i would much rather get the file fixed... its the only copy of the video file that i have so it would be a realy wonderfull thing that i get the file fixed.
One product that I have used, when there is a poorly formed AVI header is Digital Video Repair (cannot recall if it is freeware, or shareware), BUT it is likely that your file's header was NEVER written, so no amout of "repair" will succeed. Still, might be worth a try?
With many AVI's, the header often comes first, where with some other formats, like MPEG-2 and WMV, the header is the last part of the file. Could be that the header of the AVI is just incorrect, such as with the Duration. Only a test will determine if you can repair the file.
Good luck,
Hunt -
HOW CAN I GET THE VIDEOS TO WORK ON MY I-POD CLASSIC?
I am having trouble with my ipod it doesn't want to add any type of my videos a message keeps popping up saying the videos cannot be played on this ipod when i used to have videos on it before but all of the sudden it dosent want to now my computer reads it as a USB/ Harddrive now
I have tried changing the volume both by using the volume buttons on the side and through settings. I have updated all the apps. Closed and reopened a million times hoping it was just a one time deal but I have had continuous problems since the update on my ipad.
I love the update on my iphone but for some reason the ipad did not adjust well. I really would like to get it fixed because I love my ipad but there is no use when the apps an volume do not work. -
I RECENTLY BOUGHT A NEW COMPUTER BECAUSE MY OLD ONE BROKE AND ALL ITS CONTENT GOT WIPE OUT..NOW MY PROBLEM IS I CANT CONNECT MY IPOD TOUCH TO MY COMPUTER CAUSE IM AFFRAID THAT ITUNES MIGHT WIPE OUT ALL MY APPS AND MUSIC. BUT I HAVE IMPORTANT VIDEOS THERE THAT I REALLY NEED TO TRANSFER TO MY COMPUTER..HELP PLEASEEEEEEEEEEEEE.THANKS!♥♥♥
- Authorize the computer for the account used on the iPod. Then connect the iPod to the computer and transfer iTunes purchases to the new computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of thos discussed here.
Best iPod to PC
- Make a backup of the iPod by right clicking on the iPod under Devices in iTunes and select Backup. The backup will contain all the photos and video that were taken by the iPod that are still on the iPod.
- Retore the iPod from that backup. -
How do I get the videos in iPhoto into a thumbnail in iMovie
How can I get the videos that are in an iPhoto album to a thumbnail in iMovie when thumbnail does not appear? I have a early 2009 24" iMac and using iphoto 11.
Are you saying the the movie in iPhoto doesn't show a thumbnail or that it doesn't have a thumbnail in iMovie? If the latter then ask in the iMovie forum.
If the former then we need more information:
what exact version of iPhoto are you using?
what system version are you running?
what do you see in the iPhoto window when viewing an Event containing the movie in question?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive? -
Help! How can I get my video to show on my website?
Hi
I created an interactive book in InDesign CS5.5 and exported the .swf file to my desktop to include all the media (a video) and the interactive page turns. I generated an HTML page and according to this page, http://kb2.adobe.com/cps/827/cpsid_82754.html, there was supposed to be a 'Resources folder' with the video asset in there. However this folder was not created.
When I open the html page in my browser, everything works perfectly.
However, when I went to upoad the html and .swf files to my website, http://www.avantiandg.co.uk/ the last page with the video does not show.
My questions are:
1. How can I access the resources folder that is supposed to be created that I am supposed to upload to my website folder?
2. How can I get the video to load up correctly?
Thanksmaybe a solution:
Videos contained in interactive files must be converted to M4V format before being imported to Indesign, AVI, H264 or MPG won't appear once the file exported to SWF.
In HTML the ressource folder is normally next to the root file of your site (index.html) no? -
How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..
You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps. -
How can i get HD video out from the lumia 900. ? ...
How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?
Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you! -
My computer crashed and I had to reinstall windows 7, how can I get the playlist on my iphone onto itunes?
It has always been very basic to always maintain a backup copy of your computer for this very occasion.
If for some reason you have failed to do this, not good, then you can transfer itunes purchass from the ipod. File>Devices>Transfer Purchases
Maybe you are looking for
-
ORA-00955 reports when I try to "create global temporary table" in windows
Hi, When I try to run the sql in my oracle 9i server which is installed in a windows2000 machine, Create global temporary table test ...; For the first time, I can create table successfully. But I cannot access this table any more: drop table test; d
-
Error while refreshing bqy file on workspace using stored procedure
Hi, I am using stored procedure which returns ref-cursor. The report is running fine locally but on Workspace, while refresh, it gives the following error. An Interactive Reporting Service error has occurred.-SQL API: [SQLNumResultCols], SQL RETURN:
-
When posting GI for Non valuated material in Delivery geting error (M8147)
Hi Experts We have a problem that we are trying to send a material from one plant in one company code to another plant in another company code (Inter Company Stock Transfer Order). The material is of type Non Valuated (So it has no valuation class).
-
AT&T has rules for the iPhone 3G S launch - Lines allowed to form starting at 7am
AT&T has rules for iPhone 3G S launch - Lines allowed to form starting at 7am Perhaps AT&T has learned some from the troubles with iPhone past launches and they are going to try to make the experience better by settings some rules this time around. W
-
Relationships in Address Book entries
Are there any applications which make use of the relationships within the OS X address book entries? I'm talking about the ability to specify one's brother, spouse, parents etc... Does this field actually serve a practical purpose for anything? I'm j