How can I get the wireless hardware fixed on my HP photosmart C7250 all in one printer?

I did the test by holding down the # 6 and it said that the wireless hardware needed service. Any advice on where to get it serviced? Thank you!

Hi,
Please use the following link (under "Manage Print Apps" to cancel/remove it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
You may also get this:
My Print Apps
To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
Please also try this (if the above mothod did not help):
http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll=false&destPage=document&cc=us&dlc=en&docname=c031...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How can I get the photos on my pc onto my Macbook without emailing each one individually to myself?

How can I get the photos on my pc onto my Macbook without emailing each one individually to myself?

Welcome to Apple Support Communities.
Copy them from your PC to a flash drive or an external drive, then open iPhoto and select Import to Library.
Depending on your settings, iPhoto might open automatically and ask if you want to import them when the device (camera or flash drive or external drive) containing the images is connected.
At the end of the import, iPhoto will ask if you want to delete or keep the photos on the other device. Keep until you're absolutely certain all images are imported correctly and you've viewed them in iPhoto. It's always nice to have a backup.

How to print from iPad on hp photosmart c7250 all in one printer using wi fi?

I want to print from my iPad mini to a HP photosmartC7250 all in one printer using wi fi, please.

You need a third party printing app or an app that lets your computer act as the print server. Your printer is not an AirPrint printer from what I can see. You can double check here.
http://support.apple.com/kb/ht4356
Printopia for the Mac or Fingerprint for Windows will let you use the computer as the print server.
http://www.ecamm.com/mac/printopia/
https://www.collobos.com/
Printing apps for iPad
http://appadvice.com/appguides/show/printing

Can't get NEW black ink cartridge to work in 5515 HP all-in-one-printer

Can't get NEW black ink cartridge to work in printer..help

Hi caralu,
I was just wondering if you were able to try banhien's recommendation? Please let me know the outcome.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I get the dynamic zoom tool to work in my PDF all the time?

I have designed an interactive PDF to open in full-screen view only. Of course, when it does so, none of Reader's tool bars are available to the end-user. But as the PDF is meant to be used on screen, I want the recipient to access the dynamic zoom tool. So I have introduced access to it from within the PDF itself.
This I have done using the Button tool to create a button that appears on each page of the PDF that, when clicked, turns the cursor into the dynamic tool. Another button I created alongside it brings back the cursor.
However, having done this, some recipients receiving the PDF have been able to access the dynamic zoom tool from within my lovingly crafted PDF but others have not (the dynamic zoom tool worked on a PC machine running XP/Home & Reader 7, but not on PCs running XP/Home & Reader 8 or 9).
And of course, the tool works fine when the user exits out of full-screen view & accesses the tool via the menu, or the toolbar.
But we don't want the menu or tool bars to be visible!!
So my question is, does anyone know why this specific function on the PDF I created is working for some and not for others? Do you know if there is something specific I need to apply within the Button tool's settings or the PDF's settings that once actioned will completely avoid this problem from reoccurring? Or is there a bug in the software that you are aware of that prevents me from creating a PDF that includes access to the dynamic zoom tool from within itself (not via the toolbar) and which works fine in different versions of Reader & across PC/Mac platforms & operating systems?
(I created the PDF using Acrobat Pro 9 on a Mac running Leopard, 10.5.9. And if anyone wants to know, you can create the interactive button as I did from the menu bar: go to Tools > Advanced editing > Button tool. Clicking Button tool brings up a cross-hair cursor. Click & drag to marquee the area you want to make interactive (in my case, over the icon I designed & introduced to each page of the PDF to represent the dynamic zoom tool).
This brings up a dialogue box where you can select the appearance of the button (eg visible or invisible), which trigger is needed to activate it (clicking, hovering, etc), & what action is generated once you've done so (like going to another page in the document, run a javascript, play a sound, or execute any of the menu items).
So all I did is told it which menu item to activate, by selecting 'execute menu item' in the drop-down menu, going to the menu to select it & clicking okay. Simples!)

Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save Link as".
Flash Player Plug-in (All other browsers)
THAT's the Flash Player.
Shockwave Player 12
THAT's the Shockwave plugin.
BOTH should be up to date.

Trying to embed a wmv video in website to work with Firefox. Video works but the controls appear then disappear. How can I get the cotnrols to show and stay. Works in all other browsers.

Here's the code I used:
<pre><nowiki><p class="bodytext"><OBJECT id='mediaPlayer' width="320" height="240" class="imageright"
classid='CLSID:22d6f312-b0f6-11d0-94ab-0080c74c7e95'
codebase='http://activex.microsoft.com/activex/controls/ mplayer/en/nsmp2inf.cab#Version=5,1,52,701'
standby='Loading Microsoft Windows Media Player components...' type='application/x-oleobject'>
<param name='fileName' value="video.wmv">
<param name='animationatStart' value='true'>
<param name='transparentatStart' value='true'>
<param name='autoStart' value='true'>
<param name='ShowControls' value='true'>
<param name='ShowDisplay' value='false'>
<param name='ShowStatusBar' value='false'>
<param name='loop' value='false'>
<EMBED type='application/x-mplayer2'
pluginspage='http://microsoft.com/windows/mediaplayer/en/download/'
id='mediaPlayer' name='mediaPlayer' displaysize='4' autosize='1'
bgcolor='black' ShowControls='true' showtracker='1'
ShowDisplay='1' showstatusbar='1' videoborder3d='0' width="320" height="240"
src="video.wmv" autostart='1' designtimesp='5311' loop='0'>
</EMBED></nowiki></pre>
Also tried showcontrols=1

I had this exact problem too. Unlike IE, firefox wasn't scaling the video to fit into the height and width I defined. As a result the controls were disappearing off the bottom.
I found that by making the height of the window 50px larger than the videos native height, the controls were displayed permenantly. Since the other browsers scale the video to fit the window, this solution works for them all.

How can i get the videos i recorded in my ipod without losing all it's data(im using another computer)

I RECENTLY BOUGHT A NEW COMPUTER BECAUSE MY OLD ONE BROKE AND ALL ITS CONTENT GOT WIPE OUT..NOW MY PROBLEM IS I CANT CONNECT MY IPOD TOUCH TO MY COMPUTER CAUSE IM AFFRAID THAT ITUNES MIGHT WIPE OUT ALL MY APPS AND MUSIC. BUT I HAVE IMPORTANT VIDEOS THERE THAT I REALLY NEED TO TRANSFER TO MY COMPUTER..HELP PLEASEEEEEEEEEEEEE.THANKS!♥♥♥

- Authorize the computer for the account used on the iPod. Then connect the iPod to the computer and transfer iTunes purchases to the new computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of thos discussed here.
Best iPod to PC
- Make a backup of the iPod by right clicking on the iPod under Devices in iTunes and select Backup. The backup will contain all the photos and video that were taken by the iPod that are still on the iPod.
- Retore the iPod from that backup.

Setup can't detect network printer Photosmart C7250 all in one

I volunteer for our local historical society. The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things.
There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
Internet connectivity is via a dsl line with a combination modem/router. I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area) but I’m not sure and I’m not at the museum now.
A couple of weeks ago I was able to connect the laptop to the network via wifi. My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network. The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection. The PC now successfully prints to the printer over the network. I downloaded the software and drivers directly to the laptop from the HP site and began the installation. When it got to the point of finding the network printer the software couldn’t detect it. I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well. Setup couldn’t detect the network printer, even after searching for the network ip address.
Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer. This shouldn’t make any difference.
I’ve searched the forums and haven’t seen anything that is like my issue.
I don’t what else to do. Hopefully someone will give me some advice on what to do next.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices. Do you have access to the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open?

How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open? Tried the coin...nope. Tried a screw driver...nope! Even tried WD-40 - nope! Or does this mean it's now in the boat anchor pile!

They are designed for coins... is this your first time changing the battery? Make sure you are twisting in the right direction and make sure you are pushing down on it and applying pressure at the same time you turn.

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view. How can I get the icons back on the thumbnail photos of the full gallery that is loaded?

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)

You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.

How can i get the max rpm from cpu fan??

how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ?? please make things clear for me
thanks

if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
need more air get a different cooler/fan

How can I get the MAC address of my Apple TV?

How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
(to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
[http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

How can i get my wireless to work on my printer hp officejet pro 8600

how can i get my wireless to work on my printer hp officejet pro 8600

You'll get faster help w/this question by posting it in the Wireless forum...here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
I am an HP employee.

How can I get the wireless hardware fixed on my HP photosmart C7250 all in one printer?

Similar Messages

Maybe you are looking for