How can I get this effect?

Hello! Good day to all.
I was wondering if any of you experienced photoshop users can help me to learn how to get this effect.
Here is the "before edition" image:
And here is the "after edition" image:
I got this effect playing around with filters in my Adobe Elements, but now that my father bought Photoshop CS6 Extended, I took advantage and installed it on my laptop aswell. The problem is, I have no idea how to use most of it.
I've been learning some tricks on YouTube tutorials and courses, but I just can't find the way to get this one effect.
I'm very gratefull for you taking the time to reading this and helping me, and I wish you a great day.

Lots of ways to do that. After applying the Threshold adjustment, you could use Gaussian blur followed by levels and drag the black and white sliders toward the center like this:
Or
You could use the Magic wand with Contiguous un-checked, and select the blacks. Then use Refine Edge, and add some Smoothing, and wee bit of feather. OK that and fill with black (Alt/Opt backspace with black as your foreground colour)
Now invert the selection (Ctrl Shift i or Cmd Shift i) and fill with white. You will loose fine detail acording to the settings you use in Refine edge - especiall the amount of Smoothing.
Or
Copy the layer with Ctrl/Cmd j
Add a new background layer, and fill with white.
Select the blacks with the magic wand (remember to uncheck contiguous in the Options bar), and with the selection in place, add a layer mask.
Now completely fill the layer (not the layer mask) with black.
You can now adjust the effect with the Mask Properties panel. If you can get it right with Feather you can make as many adjustments as you like to fine tune, but if you use Mask edge, you only get one go because it is destructive editing.

Similar Messages

WHAT iS THIS EFFECT CALLED? OR HOW CAN I GET THIS EFFECT?

WHAT'S THIS EFFECT CALLED? OR HOW CAN I GET THIS EFFECT?
first of all i don't know what's this kind of photo effect called, i just describe it as bright, clean and w/o lack of contrasts
secondly, i wanna learn how to achieve this effect.....really don't know how
need help here....
btw i don't know where to post this post....so i just start from here =)\

For my part you are welcome, Lisa.
then what about the color tone here? it's very pure and clean, a touch of blue i think, is it from the nature light or from photoshop effect?
The colour tone is (hopefully) a result of the nature of the natural light faithfully reproduced by the high quality of the camera (and film if relevant).
You will get quite different and sometimes rapidly changing tones of colour depending on the natural light; this is different for different times of day, different directions, different weather conditions.
Just to mention a few comparisons, the warm light from the setting sun is quite different from the cool light from the clear bright sky through a (high) window to the north at noon, and the light of the sun can be changed immensely by the huge white (or grey) filter sometimes applied to (parts of) the sky.
You may do many things in Photoshop, but photography is still an art form, not just cheating, at least for some.
I believe one of the real provings of cameras/films is the ability to reproduce the delicate but profoundly different tinges in snow on a clear day.

How can I get this effect in Photoshop CS5.1?

I want to turn a real image like http://bit.ly/pEx1ol
into something like http://bit.ly/nfkoa4
Is there a way to do that or do I have to start from scratch?

Just fooling around with your image, using Stylize - Trace Contour to find significant lines, then filling the spaces with a color sampled from within the spaces, I came up with this in a few minutes. Kind of a "paint by numbers" rendition. This doesn't look much like your stylized cat illustration, though.
-Noel

How can I get this effect in Illustrator

I did a logo for a Barber Shop and the logo looks very plain. I was thinking about adding more detail to it like in the photo below. (Arrows point to the effect I'm trying to achieve.) Thanks in advance.

Gradient meshes, blends, stacking multiple layers with reduced opacities and belnding modes. whatever it takes...
Mylenium

How can I get this effect in FCPX

https://www.youtube.com/watch?v=MkxYnzGWV4w
I want to key frame the color of a character like this one was changed for me.

Gradient meshes, blends, stacking multiple layers with reduced opacities and belnding modes. whatever it takes...
Mylenium

How do I get this effect?

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3244557723_1857154
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Hi!
I have a series of QuickTime files that I am trying to
present in a nice
interface. I know how I can create this effect in Flash- but
given the
number of .movs I have, I am thinking of sticking to QT. The
example I have
in mind is
http://www.apple.com/aperture/quicktours/
I went through the source code and tried to replicate it by
changing some of
the values but it does not seem to work. I thought about
using frames to
ease complication but I find frames cumbersome. I am open to
suggestions but
would prefer to keep the video clips in QT versus converting
to FLV.
Thank you.
Kelvin
--B_3244557723_1857154
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>How do I get this effect?</TITLE>
</HEAD>
<BODY>
Hi! 
 
I have a series of QuickTime files that I am trying to
present in a nice in=
terface. I know how I can create this effect in Flash- but
given the number =
of .movs I have, I am thinking of sticking to QT. The example
I have in mind=
is <a href=3D"
/aperture/quicktours/</a> 
 
I went through the source code and tried to replicate it by
changing some o=
f the values but it does not seem to work. I thought about
using frames to e=
ase complication but I find frames cumbersome. I am open to
suggestions but =
would prefer to keep the video clips in QT versus converting
to FLV. 
 
Thank you. 
 
Kelvin
</BODY>
</HTML>
--B_3244557723_1857154--

Hi(Bonjour)!
Welcome to the forum.
It will be difficult to compose this effect in FCE without commercial plugins like Nattress's Big Box of Tricks (G Glow dissolve).
But you can try this: create a colorized transparent document (yellow and red around the frame) in Photoshop. Save in PNG. Import into FCE.
Put it on V2, over the edit point for your video clips in V1.
Try to keyframe opacity values, animate the position with erratic displacements and add some twirling or distord effects (that can be keyframed too).
With some patience, I'm sure that you can achieve a such effect.
Michel Boissonneault

Adobe CR 6.7 does not install into CS5, how can I get this installed to view CR files?

Just installed CS5 onto new computer. Adobe bridge and CS5 do not recognize CR format. How can I get this installed. I have tried up dating and downloading the CR6.7 update, but can not get it to install. What do I do?

Product updates

Hello, I want to restore a backup on my Iphone 4S, but in i-tunes it's not vissable. When I'll look on te pc: (username)\Application Data\Apple Computer\MobileSync\Backup\ it's there! How can I get this backup to my iphone or itunes? Thanks in advance!

Hello, I want to restore a backup from this afternoobut in i-tunes it is not visseble. When I'll look on te pc: (username)\Application Data\Apple Computer\MobileSync\Backup\ it's there! How can I get this backup to my iphone or itunes? Thanks in advance!

Follow the steps in this article to restore from iTunes back up:
http://support.apple.com/kb/HT1766
Since you say you cant see the back up in iTunes you should be able to see it when following the last step where it says for iTunes 10.7 or earlier. Dont worry as this step also works for iTunes 11.

TS1702 My cars 2 app mate app is not working after upgrading from ipad to ipad 2...... synced.... uninstalled and re installed several times as well as wiped ne ipad out and re did the whole proccess several times. how can I get this app working?

I have installed the cars 2 app mate on a ipad 2 from an ipad 1 synced with itunes account.. all is working except this app. After many times of un installing and re installing aswell as talking to apple tech suport this app is still not working.... its there it just has no function...... how can i get this installed and working, my grandson is autistic and uses this app many hours a day........ it is important for me to get this up and running again for him.......

(1) So, I found a youtube video showing how to open up my iMac and replace a Disk drive. I opened it. I removed the disk drive. I opened the metal cover of the lid of the disk drive. It was clean and immaculate; so, it destroyed and debunked the dirty drive theory. But, just to make sure I sucked around the optical sensor with a vacuum and gently brushed it with a Q-tip.
(2) I then watched a you tube video showing how the drive operated (it was a drive supplied with power outside an iMac with a transparent cover unlike the opaque metal cover that we have on our drives). My scientific curiosity started to wonder if somehow the mechanical part (of the electro-mechanical assembly) was locked or jammed. So, I started messing with the arms with the utmost care after watching the video to see if i could move them manually. Yes on some. The main arm that is linked with the drive motor was immovable. The rest I played with a little bit, took great notice in the start of the video to see how the arms looked before inserting a disk. I then put it all back together.
It works now. My guess is that taking it out and then placing it back in along with the resetting options that others have done was the trick. I believe it is a possibility that the hard drive became locked mechanically in some strange manner after ejecting a DVD in conjunction with the uploading of the new OS. I believe the actual removal, reinstallation, and resetting of the drive put everything back into sync. My computer sits in a climate controlled dust free environment. I knew for a fact that this hard drive was OKAY.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT4798 i created my apple id account, verified but know i m unable to log on, it says incorrect password, i tried to reset via forgot password option but it does not send reset password page to my e- mail address, how can i get this sorted or delete my pr

User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?

The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

When I am home, calls to my iPhone 5 also go to my other family members' iPhones. How can I get this to stop happening?

When I am home, calls to my iPhone 5 also go to my other family members' iPhones. How can I get this to stop happening?

Or better yet, create and use new Apple IDs for others in your household. You could always use different Apple IDs for iCloud services (like iMessage and FaceTime) and iTunes and App Store., but it's even easier to share purchased content now with Family Sharing.

I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

iCloud storage is not allocated by device. iCloud storage is allocated to your iCloud AppleID. You get 5GB of iCloud storage.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

How can I get this effect?

Similar Messages

Maybe you are looking for