How can I get web page to retain button count values

Hi,
I have a button which, each time it is pressed increments a
number. The number is shown in a text box. This all works fine, on
my web page. However if I close the web page and then reopen it,
the count number goes back to zero. How can I keep the number it
was (eg 10) and keep incrementing it ?
I have the button on Frame 1 and the text box on Frame 2.
Thanks,
Paul

maith wrote:
> Hi,
> I have a button which, each time it is pressed
increments a number. The
> number is shown in a text box. This all works fine, on
my web page. However if
> I close the web page and then reopen it, the count
number goes back to zero.
> How can I keep the number it was (eg 10) and keep
incrementing it ?
> I have the button on Frame 1 and the text box on Frame
2.
You will need to use Shared Object to store the info on user
drive.
It is Flash's native form of cookies and works locally (from
exe projector)
as well as in browser.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

A year later...same question: How can I get a Pages document embedded ???

How can I get a Pages document embedded into an email? (so that the recipient sees it immediately and does NOT have to open a PDF). Although I know a PDF is universal and would allow anyone (mac or not) to open, read and see my business newsletter, I want it to be instantaneous for viewing. So, which leads me to a question I've kicked around for a year now on this discussion board. How do I turn a Pages doc into html for email purposes? If there isn't a way with Pages, How about with Word (the newest version) for Mac? Someone has to know this art, I receive emails like this all the time, probably from Apple! ha ha .
Please help!
-dnorheim

dnorheim wrote:
How can I get a Pages document embedded into an email? (so that the recipient sees it immediately and does NOT have to open a PDF).
we can't !
Although I know a PDF is universal and would allow anyone (mac or not) to open, read and see my business newsletter, I want it to be instantaneous for viewing.
In Mail.app, single page PDF are directly readable so you may try to
print your page #1 in a PDF
then
print your page #2 in a PDF
and so on.
So, which leads me to a question I've kicked around for a year now on this discussion board. How do I turn a Pages doc into html for email purposes?
we can't !
As Apple removed the export to html feature, I assume that it's no to reintroduce it one day
Yvan KOENIG (VALLAURIS, France) lundi 7 septembre 2009 17:50:32

Pages doesn't offer HTML, how can I get a Pages doc to be embedded?

How can I get a Pages document embedded into an email? I do not want to turn it into a pdf... what are my options. I have Freeway 5 Express if this helps.
How-to's and suggestions welcome.

What exactly do you mean? Do you just mean you want to be sure it shows as an inline attachment? You can't really control that, if so, since it depends on the recipient's mail program/server/personal settings. This is true for real HTML mail, too.
There is nothing to guarantee that if you could easily convert a pages document to HTML, the recipient would not receive it as just an attachment. In any case, I suppose you could copy/paste into a freeway file, publish that to the desktop and attach it, but really, PDF is a much, much better choice.

How can I get the page to curl when turning to the next page in iBooks author?

How can I get the page to curl when turning to the next page in iBooks author?

I don't think you can. If you need that effect, you should use ePub (that can be authored via Pages) not iBA.
I hope Apple give us the option in the future though.

How can I get the PDF to retain margins set in Word document?

Uploaded a Word 2003 document for conversion. Conversion to PDF successful, but the PDF has different margins and page breaks. How do I get the PDF to retain the set margins?

Hi NancyS,
If you're on Windows, you can try using the PDF Desktop printer to "print" your document to PDF format. Here are the instructions for installing and setting up the PDF Desktop printer: Install and configure Adobe CreatePDF Desktop Printer.
Please let us know if you have better luck using the PDF Desktop Printer.
Best,
Sara

How can I save web pages in .txt format?

I often want to save information I find online so I can look at it later. When I open the 'file; save as' box, it offers me four options, one of which is text files. but no matter which option I choose, it always saves as a web page. I just want the basic text, in .txt format. How can I get it to do this?

You should see the option for ''' "Text Files" ''' when going to save a web page, in addition to Web Page, complete and Web Page, HTML only - but that is probably going to have a lot more than just the pure text of that web page.
This should work better, but you might miss some of what appears to be "text" when viewing the web page. <br />
{Ctrl + A} to highlight the entire web page, then {Ctrl + C} to copy everything that is highlighted to the Clipboard. Then Paste the contents of the Clipboard into a Text Editor program, then use {Ctrl + S} to bring up the Save As... dialog. Name that file and make sure you include '''.txt'''.

How Can I get a Page on my Aldus Pagemaker 3.0

I want to install Aldus Pagemaker 3.0 on my Apple Powerbook 1400, so I can use some files that I created in the 1990's on Aldus Pagemaker 3.0.
I have Pagemaker 4.2 on another computer, but it distorts the diagrams from the 3.0 files.
So I purchased Pagemaker 3.0 on eBay. I received 5 disks: Install Disk, Program Disk, Utilities & APDS, Templates, & Getting Started.
When I installed Aldus Pagemaker 3.0 on my Powerbook 1400 it tells me the installation was successful.
But when I click on the Pagemaker icon a window opens with the logo for "Aldus Pagemaker, Version 3.0."
At the top of the screen it shows the dropdowns.
When I click on "open new" it takes me to page setup.
I cannot get a page to appear so I can type on it.
How can I open a page?

The chances of you finding anyone that can help you with something that’s about 20 years old are not very good.
I certainly can’t help, but I just wanted you to be aware that PM is totally dead and hasn’t been touched by Adobe for about 10 years. Most users have move to InDesign.
Bob

How can I get WebAS to not start-up after restarting Windows?

I would like to not have my WebAS auto start after I reboot windows.
I found of couple of options in Configuration tool but they did not stop it.
We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop. However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING.
So, how can I configure WebAS to not automatically start-up after rebooting windows? I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

Easier than it seems
Go to Administrative Tools/ Services in Windows.
Change Startup type of the services to Manual.
You can just sort by the 'Log On As' Column
".\SAPServiceJ2E"
or whatever you instance name is. You can always start the service from the MMC console after this.

How can I get web searches to start with uk sites.

When I do a web search for a product it shows USA sites which is frustrating. How can I get UK sites to be the first sites displayed?
Cheers
Pat

Hello lindyh, for specific Search results you can install specific Search Engine Plugins, example for google : http://mycroftproject.com/google-search-plugins.html
Google UK (SSL) en-GB (google.co.uk) by Mycroft Project
Google UK - the UK (SSL) en-GB (google.co.uk) by Mycroft Project
in general : http://mycroftproject.com/search-engines.html
for master password see the next links for details :
* [https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins Use a Master Password to protect stored logins and passwords]
* http://kb.mozillazine.org/Master_password
thank you

How can I convert web page to PDF? When I upgraded to 4, it does not work.

Since I upgraded to firefox 4 I can not convert web page to PDF, before there was a place in the upper left corner that said convert to PDF. If there is not a way to do this in 4 then how can I go back to the old firefox. If I can't I guess I will just uninstall FireFox.

Moved to Creating, Editing & Exporting PDFs

How can I get the container of a button after the button is clicked?

I have two components:
public class A extends JPanel implements ActionListener {
    public A() {
    public void actionPerformed(ActionEvent e) {
        String command = e.getActionCommand();
        // here need to know the instance of B to execute it's process()
        // but I can only know the button jb in B via the following code:
        JButton myjb = (JButton)(e.getSource());
public class B extends JPanel {
    public ContainerInfoInput(ActionListener al) {
        JButton jb = new JButton("OK");
        jb.setActionCommand("B.ok");
        jb.addActionListener(al);
    public process() {
public class Main {
    A a = new A();
    B b = new B(a);
}How can I get the instance of B in which the button is clicked?
Thank you

I think it's a defect of the listener mechanism. Under the present circumstance, I must do it like the following:
I must use another class M as a bridge:
class A {
    public A() { }
    public processA (String info ){}
class B{
    public B(ActionListener al) {
        JButton jb = new JButton("OK");
        jb.setActionCommand("B.ok");
        jb.addActionListener(al);
   public String processB () {    }
class M implements ActionListener {
    public M() {
        A a = new A();
        B b = new B(this);
    public void actionPerformed(ActionEvent e) {
        String command = e.getActionCommand();
        if(command.equals("B.ok")) {
            String information =b.processB();
            a.processA(information);
}Why not just use A to listen B and obtain instance of B through the ActionEvent?
Anyone know a solution about it?

TS3899 How can I get rid of a wrong email count on inbox?

I have set up my BT email account in settings, and it works fine. Except that although the inbox if empty there's a constant icon on the home screen showing 13 emails in the box. I can't get rid of this, even though I have set up the email twice now. What's going on and how can I get rid of the score when the box is empty? It just counts up from 13. (ipad mini)

Thanks.
I tried that, waited for the Apple to appear. But when the home screen appeared - just the same. So I deleted the account (bt internet). Re-set as before. Then set up the account again. still have 13 emails showing and nothing in the in box. Annoying. I think this is because I delete some (13?) emails from the online access to the inbox (on a laptop) but it's out of synch with the ipad. Neither account has any emails but the ipad thinks it's got 13 I have deleted. But they are not there!!!
Thanks anyway.

My web pages now appear in an outline format, instead of the normal web-designed look. I only noticed this with the upgrade. How can I get my pages to return to normal ?

my web pages appear in an outline text form. Functionality has been affected. Please help.

What do you mean with an outline format?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How can i call Web page from my Forms 6 and Some other doubts.

Dear friends,
I am having the following questions and doubts ..If you can share some information with me it will be greatly useful to me..
Q1. I am using Dev Forms 6i. Can we call a Web Page form from the Developer Form directly with the press of a button..(eg. When button Pressed trigger..? )If so, what the requirement to do so. My database is Oracle 8i
Q2. How can we send email from a Form picking the address from our Oracle Database..? I have installed only Oracle 8i and Forms & Reports 6i. Anymore has to be installed for this work?
Q3. Do you know any GIS package that can be integrated with Oracle so that we can know the Latitude and Longtude of a lcation if we give an address..? and what can be done for this purpose.
please revert with the info...
Sincerly
Sajith
12100 Beech Forest Road,
Laurel, MD 20708, USA
Phone : (301) 497-5816
Cell : (301) 693-6767
Email : [email protected]

Here is code I used to send an email from Form 6.0 through Outlook 2000 on a PC. I don't know the answer to you rother questions.
PROCEDURE maily (p_to_address VARCHAR2, p_cc_address VARCHAR2 DEFAULT NULL, p_subject VARCHAR2, p_message VARCHAR2) IS
     objOutlook OLE2.OBJ_TYPE;
     objMail OLE2.OBJ_TYPE;
     objArg OLE2.LIST_TYPE;
BEGIN
     objOutlook := OLE2.CREATE_OBJ('Outlook.Application');
     objarg := OLE2.CREATE_ARGLIST;
     OLE2.ADD_ARG(objarg,0);
     objMail := OLE2.INVOKE_OBJ(objOutlook,'CreateItem',objarg);
     OLE2.DESTROY_ARGLIST(objarg);
     OLE2.SET_PROPERTY(objmail,'To',p_to_address);
     OLE2.SET_PROPERTY(objmail,'Cc',p_cc_address);
     OLE2.SET_PROPERTY(objmail,'Subject',p_subject);
     OLE2.SET_PROPERTY(objmail,'Body',p_message);
     OLE2.INVOKE(objmail,'Send');//Use display to display the email instead of sending it, or save to save in the outbox
     OLE2.RELEASE_OBJ(objmail);
     OLE2.RELEASE_OBJ(objOutlook);
END;

How can I get web page to retain button count values

Similar Messages

Maybe you are looking for