How can i give multiple paragraph styles on the same line

i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
Is there any way to do this ????

YaneshTyagi wrote:
i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
Is there any way to do this ????
Hi, Yanesh:
Please understand, the FrameMaker feature known as a run-in paragraph, which is a paragraph with a "carriage return" but without a "line feed," HAS NO COUNTERPART in InDesign. InDesign also lacks the FrameMaker side heading feature, which is created by the combination of a reserved area in the text frame and the paragraph property to inhabit that area. FrameMaker separates paragraphs by using the larger of space below paragraph and space above paragraph, but InDesign separates paragraphs by adding the space below paragraph and the space above paragraph.
There are several complicated manual methods of simulating these FrameMaker properties in InDesign.
Here's a recent forum discussion of these exact issues: http://forums.adobe.com/message/3759635#3759635. The thread mentions DTP Tools' conversion tool, the MIF Filter commercial plug-in for InDesign, and discusses its shortcomings. I don't recall it mentioning in-tools.com plug-ins that can simulate side headings, like those in FrameMaker, but they don't convert FrameMaker to InDesign.
You can add your vote for InDesign's developers to include these FrameMaker features, and any others you'd like to see, here: wish.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

How can I place multiple choice boxes on the same line instead of in a column?

I know it is possible to place multiple fields on the same line, using drag and drop.
But to save space, I would like to have 3 or 4 multiple choice boxes next to each other on one line.
Is this possible, and if so, how?
Thanks
Peter

You may click on the "+" button to the right of the first multiple choice box to add more in the same line. When you hover over the button, the tooltip says "insert item beside".

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

HT1689 How can I stop multiple automatic downloads of the same item?

Why does iTunes keep wanting to download the same item over and over again? How do I stop this without turning off the automatic download function.

You may click on the "+" button to the right of the first multiple choice box to add more in the same line. When you hover over the button, the tooltip says "insert item beside".

How can I write left and right in the same line of a richtextbox?

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks
As
Viorel_ says "Perhaps there are other much easier solutions. For example, create two
RichTextBoxes with no borders (if you only need two columns of text)" but the real issue would be saving the info in the RichTextBox's (RTB's) RTF or Text to two different RTF or TextFiles. Although I suppose if it was just going to
a TextFile then you could somehow use a delimited text file so each same line number of each RTB is appended to the same line and delimited. That way you could probably load a split array with each line from the text file splitting on the delimeter per line
and providing RTB1 with index 0 of the split array and RTB2 with index 1 of the split array. I'm not going to try that.
This is some leftover code from a long time ago. It has three RTB's. RTB1 is there I suppose because the thread asking for this code wanted it. RTB2 is borderless as well as RTB3. The Aqua control in the top image below is the Panel used to cover RTB2's
scrollbar. So RTB3's scrollbar is used to scroll both controls.
I forgot to test if I typed past the scroll position in RTB2 if both would scroll as maybe RTB3 would not since it would not have anything to scroll to I suppose.
Maybe this code can help or maybe not. The bottom two images are the app running and displaying nothing scrolled in RTB2 and RTB3 then the scroll used in the bottom image.
Disregard the commented out code in the code below. It was there so I left it there. I suppose you should delete it. Also I didn't set the RTB's so one was left aligned and the other right aligned. I believe the Panel becomes a control in RTB2's controls
when it is moved to cover RTB2's vertical scrollbar but don't remember although that seems the case since both RTB2 and RTB3 are brought to front so if the Panel was not one of RTB2's controls I would think it would be behind RTB2 and RTB2's vertical scrollbar
would display but don't remember now. In fact I don't really remember how that part works. :)
Option Strict On
Public Class Form1
Declare Function SendMessage Lib "user32.dll" Alias "SendMessageW" (ByVal hWnd As IntPtr, ByVal msg As Integer, ByVal wParam As Integer, ByRef lParam As Point) As Integer
Const WM_USER As Integer = &H400
Const EM_GETSCROLLPOS As Integer = WM_USER + 221
Const EM_SETSCROLLPOS As Integer = WM_USER + 222
Dim FixTheProblem As New List(Of String)
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CenterToScreen()
Panel1.BackColor = Color.White
Panel1.BorderStyle = BorderStyle.Fixed3D
RichTextBox2.BorderStyle = BorderStyle.None
RichTextBox2.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.BorderStyle = BorderStyle.None
RichTextBox3.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.Size = RichTextBox2.Size
RichTextBox3.Top = RichTextBox2.Top
RichTextBox3.Left = RichTextBox2.Right - 20
Panel1.Size = New Size(RichTextBox2.Width * 2 - 16, RichTextBox2.Height + 4)
Panel1.Left = RichTextBox2.Left - 2
Panel1.Top = RichTextBox2.Top - 2
RichTextBox2.BringToFront()
RichTextBox3.BringToFront()
FixTheProblem.Add("Curry: £6.50")
FixTheProblem.Add("Mineral Water: £4.50")
FixTheProblem.Add("Crisp Packet: £3.60")
FixTheProblem.Add("Sweat Tea: £2.23")
FixTheProblem.Add("Motor Oil: £12.50")
FixTheProblem.Add("Coca Cola: £.75")
FixTheProblem.Add("Petrol Liter: £3.75")
FixTheProblem.Add("Shaved Ice: £.50")
FixTheProblem.Add("Marlboro: £2.20")
FixTheProblem.Add("Newspaper: £.25")
FixTheProblem.Add("Spice Pack: £.75")
FixTheProblem.Add("Salt: £.50")
FixTheProblem.Add("Pepper: £.30")
For Each Item In FixTheProblem
RichTextBox1.AppendText(Item & vbCrLf)
Next
RichTextBox1.SelectionStart = 0
RichTextBox1.ScrollToCaret()
Dim Fix As String = ""
For Each Item In FixTheProblem
Fix += Item.Replace(":", "^:") & vbCrLf
Next
Fix = Fix.Replace(vbCrLf, "^>")
Dim FixSplit() As String = Fix.Split("^"c)
For i = 0 To FixSplit.Count - 1
If CBool(i Mod 2 = 0) = True Then
RichTextBox2.AppendText(FixSplit(i).Replace(">"c, "") & vbCrLf)
ElseIf CBool(i Mod 2 = 0) = False Then
RichTextBox3.AppendText(FixSplit(i) & vbCrLf)
End If
Next
End Sub
Dim RTB2ScrollPoint As Point
Private Sub RichTextBox2_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox2.VScroll
Dim RTB2ScrollPoint As Point
SendMessage(RichTextBox2.Handle, EM_GETSCROLLPOS, 0, RTB2ScrollPoint)
SendMessage(RichTextBox3.Handle, EM_SETSCROLLPOS, 0, New Point(RTB2ScrollPoint.X, RTB2ScrollPoint.Y))
'Me.Text = RTB2ScrollPoint.X.ToString & " .. " & RTB2ScrollPoint.Y.ToString
End Sub
Private Sub RichTextBox3_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox3.VScroll
Dim RTB3ScrollPoint As Point
SendMessage(RichTextBox3.Handle, EM_GETSCROLLPOS, 0, RTB3ScrollPoint)
SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(RTB3ScrollPoint.X, RTB3ScrollPoint.Y))
'SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(0, 10))
End Sub
End Class
La vida loca

How can I make a custom style look the same in both printed and online?

My specs:
RH 9.0.2.271
Windows 7, 64-bit
Word 2010
The Background Info:
So I created some custom css styles to try and mimic the look of a message box in our documentation. Here's the css code:
.MsgBox {
    color: #000000;
    border-left-style: Solid;
    border-right-style: Solid;
    border-top-style: Solid;
    border-bottom-style: Solid;
    font-size: 10pt;
    background-color: #eeeeee;
    border-left-width: 4px;
    border-right-width: 4px;
    border-top-width: 4px;
    border-bottom-width: 4px;
    border-left-color: #cdcdcd;
    border-right-color: #cdcdcd;
    border-top-color: #cdcdcd;
    border-bottom-color: #cdcdcd;
    width: 350px;
    padding: 5px 5px 5px 5px;
    box-shadow: 10px 10px 5px #888888;
    margin-bottom: 7pt;
.MsgBoxTitle {
    color: #000000;
    border-left-style: Solid;
    border-right-style: Solid;
    border-top-style: Solid;
    border-bottom-style: Solid;
    font-size: 10pt;
    background-color: #cdcdcd;
    border-left-width: 4px;
    border-right-width: 4px;
    border-top-width: 4px;
    border-bottom-width: 0px;
    border-top-color: #cdcdcd;
    border-bottom-color: #cdcdcd;
    border-left-color: #cdcdcd;
    border-right-color: #cdcdcd;
    width: 350px;
    padding: 5px 5px 5px 5px;
    box-shadow: 10px 10px 5px #888888;
My HTML Code:
<div class="MsgBoxTitle">
    PC-DMIS MESSAGE:
</div>
<div class="MsgBox">
    <p>Please do the following steps in the indicated order.</p>
    <p>1. Remove the current SH-1/2/3 stylus.</p>
    <p>2. Attach the SHSP (Stylus Holder Setting Piece).</p>
    <p>3. Jog the probe to a safe location with a clear line of approach
     to the port(s) being calibrated. </p>
    <p>4. Then click OK.</p>
    <p>After you click OK the machine will begin DCC measurement.</p>
</div>
The Expected Output:
Here's how it renders in a browser (the title is MsgBoxTitle, the body is the MsgBox style). I'm happy with how it looks there, even if the box shadow doesn't always display:
The Ugly Printed Output:
And here's what it looks like in the printed output.
Ugly. Are there any tricks to get the printable (doc) output to match the online? Ideally, on the printed output, I'd like to have all the white space in my pseudo message box removed so it looks just like the online.

Hi Peter. Thanks for the reply.
I assumed that if I used the project style sheet during the export, Word would convert the style so that it looked the same as in the HTML. Is that a bad assumption? I'm currently not mapping to any template equivalent for these message box styles. I did try it as one of my attempts, but I couldn't figure it out. It never seemed to take the style in the .dot.
Anyway, if I use just 1 style, such as just the MsgBox, I obviously don't get the white paragraph between the title and message. That white paragraph comes from the first <p> tag in the MsgBox style. But I need to have the <p> tags in there because they're better for our localization process than line breaks.
I did do some tweaks that made it look better. Basically I structured it so that the MsgBoxTitle div is now inside the MsgBox div. Something like this:
<div class="MsgBox">
    <div class="MsgBoxTitle">PC-DMIS MESSAGE: </div>
    <p>Please do the following steps in the indicated order.</p>
    <p>1. Remove the current SH-1/2/3 stylus.</p>
    <p>2. Attach the SHSP (Stylus Holder Setting Piece).</p>
    <p>3. Jog the probe to a safe location with a clear line of approach
     to the port(s) being calibrated.</p>
    <p>4. Then click OK.</p>
    <p>After you click OK the machine will begin DCC measurement.</p>
</div>
And then I adjusted my styles borders, padding, and thickness. That helped it look more connected, but still doesn't look quite right:
Would love to get rid of that white space after the title.
If you have time, I would be interested in a more detailed example of how you did it.

How can I delete multiple copies (600 ) of the same contact that ended up on my iPhone after backing it up on iTunes?

In syncing my iPhone 3GS on iTunes, I now have many copies of the same contact -over 1,000 in one case-on my iPhone. How can I delete these multiple copies without doing it one by one on my iPhone and how can I prevent it from happening again? I have Outlook Contacts and MSN contacts -- iTunes is supposed to be syncing to my Outlook contacts, but I don't have multiple copies of any of my contacts there. HELP! Thanks!

The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

How can I make my user input on the same line as the question?

The only way I know of doing it is
System.out.println ("Please enter an uppercase letter of the English Alphabet: ");
letter = dataIn.readLine ();But that makes Please enter an uppercase letter of the English Alphabet:
**User input here, a line down**So how can I make it all fit into one line with this sort of layout:
Please enter an uppercase letter of the English Alphabet: **USER INPUTS HERE, SAME LINE**

change your call from println to print.
check the API docs for this stuff, it tells you everything you need to know.
Good Luck
Lee

How can I open multiple gmail accounts on the same Firefox broweser?

I use Firefox. I have multiple gmail accounts. I would like to access them simultaneously.

There are add-ons that allow you to do this such as:
* Multifox - http://br.mozdev.org/multifox/
* CookieSwap - https://addons.mozilla.org/firefox/addon/cookieswap/

How can i give 2 different names for the same attribute in querypannelVC

Hi
I have a View criteria and exposing as a query panel.In the VC, we are using one VO attribute instance twice"FullName".We have a requirement of display 2 different names for this attribute in the query panel Ui.Attached the VC screenshot.
Ex:Present in the Query panel Ui fields are displaying like
FullName
FullName
Requirement:
Owner
Assignee
Thanks in Advance,
Naga

Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

How do I use multiple paragraph styles in one line?

I'm working on my thesis in APA style. I'm creating a Table of Contents with the help of Pages. When you get to Level 3 in APA headings (no problems with Levels 1 and 2) it needs to look like this:
[0.5in Indent] Masculinities in higher education. For men, the college experience.... (paragraph starts on same line as the heading).
I created a paragraph style for the (bolded) heading above [Heading 3]. When I do this, like magic the heading shows up in the table of contents (yeah!). However when I do this the rest of the paragraph shows up too (boo!). When I highlight to change the just rest of the paragraph (not the heading) to the style "Body" it changes the heading too and removes it from the table of contents. How can I make 2 paragraph styles work together in the same paragraph so I can use the tale of contents tool?? Surly there is a work-around.
Pages 5

As the name implies, paragraph styles are not intended to be used on a unit smaller than a paragraph. Therefore if you want the TOC to be automatically generated then you need to have distinct paragraphs... as you specify the APA style with the content and heading continuous then you will have to manually create the TOC.

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph.
I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature. I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph. Is this possible?
Thanks!

Nice of you to be doing this for your Mother's Thesis.
There are several issues here:
1. A Paragraph Style is what it says, the style for the paragraph
2. You can format text within a paragraph by applying a Character Style
3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
So in answer to your question, no.
You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
Peter
Apple's marketing slogan:
Pages 5.5.1 - Can't Do That!

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How can i give a dedicated domain to the wiki

How can i give a dedicated domain to the wiki eg. wiki.mydomain.com instead of server.local/wiki
Trying to get rid of the /wiki can this be done outside of editing the apache conf file.

You're on your own with this:
How to Enable Wiki Services on Multiple Virtual Hosts with Mountain Lion Server

How can i give multiple paragraph styles on the same line

Similar Messages

Maybe you are looking for