How can I gradually increase volume from lower freq to higher freq

I did a search and did not find anything specific to this.....i found a post on how to do this from start to end of a file......but I want to do a gradual increase starting at the lower frequencies then dropping off towards the higher frequencies or vice versa....can anyone shed any light?

If you want to change the frequency response throughout either the file, or a section of it, you have to use EQ, and the easiest way to do this is to apply it in the Multitrack view. This would mean that you could use the automation system to vary paramaters whilst the track is playing. If you don't do it this way, you'll only be able to apply a preset value to whatever selection you've made (or the whole file, if you didn't make one).
But you don't want to use pitch bending or shifting!

Similar Messages

Can we move account group from lower level to higher level

Hello Experts,
I have now 1 level hierarchy in our organisation. Now we are planning to move from 1 level to 4 level.
Now our problem is all sold to party (c002) and ship to party ( 5103) has same account group.
We are going to assign sold-to-party and ship-to-party 4th level. So can we move sold-to-party account group to 3 level hierarchy account group ?
we want to discout to customer at some level . so how we have to give discount at particular level ?
Thanks in advance.
Best Regards,
Zubera

Dear Shridar Udupi,
Could you be kind enough to let the forum know how the issue was resolved which would help others learn.
With best regards.
Venkat - Hyd

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How can I copy the titles from a project volume one use them for the rest?

I'm editing a four DVD set, and would like to use the same opening titles and credits for each. How can I copy the titles from volume one and use them for the rest? Thank you.

Open the project that has the titles you want to use. Select (highlight) all the title clips you want, then right-click and choose COPY.
Open the new project(s), then paste the titles onto the Timeline.
Done.
-DH

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.

Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
Jeroen

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

How can i take the pictures from my old ipod and transfer them onto my computer without deleting anything

How can I take the pics from my old ipod and transfer them onto my computer without deleting anything?

Pictures on an iPod are stored in a special format, optimized for the iPod's small lower resolution screen, to save storage space. iTunes puts them into that format when syncing. There is setting in iTunes, on the iPod's Photos screen (where you set up syncing of photos) for Include full resolution photos. If that checkbox was checked when you synced the photos to the iPod, THEN you can Enable disk use and find those photo files on the iPod in the Photos folder.
Otherwise, you cannot get your photos back, using iTunes. There may be third-party utilities that can extract individual photos from the iPod, but they will still be lower-resolution versions of the original photo.

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

How can i call a zreport from my bsp page.

Hi friends,
How can i call a zreport from my bsp page.
Moosa

Hi Friend,
These are the codings to be wirtten in BSP for transferring values to the REPORT
DATA:wf_date TYPE ztable-ID.
      data:seltab type standard table of rsparams,
       wa_seltab like line of seltab,
     event TYPE REF TO if_htmlb_data.
DATA:p_value TYPE REF TO CL_HTMLB_INPUTFIELD.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
p_requ ?= CL_HTMLB_MANAGER=>GET_DATA(
                                        request = runtime->server->request
                                        name     = 'inputField'
                                        id       = 'i1'
if p_requ is not initial.
wf_date = p_requ->value.
endif.
clear wa_seltab.
if wf_date is not initial.
wa_seltab-selname = 'P_REQU'.
wa_seltab-kind = 'P'.
wa_seltab-option = 'EQ'.
wa_seltab-low = wf_date.
append wa_seltab to seltab.
endif.
submit *ZSAMPLEAP1* with selection-table seltab AND RETURN .(ZSAMPLEAP1 refers to the report name and AND RETURN for coming back to the BSP page after the completion of its operation in Report )
IMPORT int_name TO int_name FROM MEMORY ID '*zid*'.(For importing the obtained value from Report)
In Report
REPORT ZSAMPLEAP1.
SELECT-OPTIONS: p_requ FOR ztable-id NO INTERVALS.
SELECT SINGLE name from ztable into int_name WHERE id = p_requ-low.
WRITE:int_name.
    EXPORT int_name TO MEMORY ID 'zsharmila'.
With Regards,
SHARMILA BRINDHA.M

I locked my volume level, and forgot the code to unlock it, so how can i get my volume back to normal without a code??

About four years ago I set the volume lock on my ipod to half way up. To do that, you enter a four number code. I decided to change the code one day, and then ever since then i can not remember the code. I would like to remove my volume lock from half way, so that i can turn it up to max volume, but to do this it is asking for the old four number code, which i don't remember! So how can i take this volume lock off without knowing the code??? I tried to reset all settings, but that did not remove the volume lock. Please help me figure out how to achieve full volume level!
Thanks.

See here: Restoring iPod to factory settings
B-rock

How can i prevent my pro from over heating?

How can i prevent my pro from over heating?

Don't use the computer in your lap, or on a blanket or pillow. The case bottom is part of the heat dissipation system so it needs air underneath. If you must use the computer in your lap, get a lapboard. There are cheap, even more so if you make one yourself.
If the computer is a older MBP with silver keys, avoid "clamshell" mode when using an external monitor. Those models let a lot of heat escape through the keyboard. The black-key Unibody versions don't seem to rely so much on the keyboard as a vent.
Like eww said, what feels hot to you may not threaten the computer's well-being. Get a temperature monitoring utility. I like this one:
http://bresink.com/osx/TemperatureMonitor.html
It runs politely in the background and puts the readout in the menubar:
so you don't have to invoke Dashboard like some other temp monitors require. As Dashboard loads all its widgets as soon as it's invoked, the extra widget processes can run up the temps and you don't get a true average use temp.
If you use Dashboard a lot, those processes stay active after the first launch and can eat processor cycles as well as increase temps. I use DashQuit, a widget that shuts down Dashboard when I'm done without requiring a computer restart. It's here:
http://www.apple.com/downloads/dashboard/status/dashquit_berenguierduncan.html

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag.
I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
Thank you for advising,

Try deleting the .plist.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

How can I recover deleted photos from formatted micro sd card?

How can I recover deleted photos from formatted micro sd card?

As long as you haven´t low level format the card, use Photorec. It is open source.
My Swedish blog
X100, 7D, 6D, 17-40/4L, 70-200/2,8L IS II, 17-55/2.8 IS, 24-105/4L, 85/1,8, 50/1,4, 24/1,4L II, Helios 58/2
Darktable, RawTherapee, Photomatix, Luminance HDR, GIMP 2.9.1.

Since my update, I can't adjust the volume from my keyboard...the volume keys have a locked symbol that shows when I press them. I checked System preferences but can't find a way to get the lock off. Thoughts?

I can't adjust my volume from the keyboard volume controls... they seem to be locked. I tried system preferences, but couldn't find how to "unlock" them. Thoughts?

Did you try unchecking this function? It seems to work in reverse of what you would expect, or is that just my imagination?

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

How can I gradually increase volume from lower freq to higher freq

Similar Messages

Maybe you are looking for