How can I handle the offline registration codes easily?

After I've successfully installed my (purchased and paid) Photoshop CS6 on my "main computer", I wanted to install a copy on my computer at school, where I do not have internet connection (so I can use only one copy at a time). The offline registration code is a stream of numbers and letters, where it is difficult to distinguish the capital i (= I) from the small L (= l) or half ot 2 (= 1) - depending on the font. Then we have the usual capital o and zero (O and 0) problem. Well, after > half an hour (!!!) entry of my request code on the Adobe site I managed to get a response code to be entered at my offline machine. This was as complicated as the other one and after 40 minutes (!!!!!) try I could not manage to get my CS6 activated. First question: Is there another - hopefully simpler - method? Second question: In the case it might be really nessecary to use such long codes, why can't you omit using these difficult to distinguish signs and why can't you leave the wrong code so I dont't have to retype it such frequently?
Thank you in advance

You can always call support and let them talk you through while at the machine. As for the readability issues - all numbers can be copy&pasted to a text editor and then you can set Courier or another machine type. This should eliminate all ambiguities, though I understand your concerns.
Mylenium

Similar Messages

How can i hide quicktime pro registration code to students

how can i hide quicktime pro registration code to students

if you have lostthe reg key, the only way to have QTP is to purchase it again.

How can i find the value category code in CJVC

Hi Gurus
how can i find the value category code in CJVC and which tables its stored.can any one tell me.please please

Read TPIK3 in an internal table, then search COEP-KSTAR in this table, with KSTAR between TPIK3-KSTRF and TPIK3-KSTRT, and other keys like Controlling Area and application/component (eg "PS" in project-system as in CJVC or "PM" in Maintenance as in IW33, multiple application use this table). You can also use a FM like PS_FIND_ACPOS_FOR_KSTAR.
Regards,
Raymond

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

HI Experts,
Pls. clarify that, How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) as input?
ThanQ.

Check with USRM1 Table
give user name (Uname ) and you get company code (BUKRS)
also check with other tables : USRM* in SE11
Thanks
Seshu

How can i reset the for digit code?

how can i reset the for digit code?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How can I download the full source code for the Java 3D package

how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meir

thank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :)

How can I get the XSLT source code?

How can I get the XSLT source code?

Actually, I want to parse customer reviews for academic purpose.
I'm trying to follow the links in the customer reviews zone.
For example:
In the following page
http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
So if anyone knows how to imitate the next link action using software that will sure help me a lot.
Thanks in advance

How can i change the restrictions pass code

How can i change the restrictions pass code

Disable restrictions, then re-enable such. You'll be prompted for a new passcode.

Acrobat Pro for Mac bought on Amazon;how can I register it?. registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

I purchased Acrobat Pro for Mac on Amazon. When I try to register with the registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard.

How can I erase the enter pass code from my iphone 4?

I was not paying attention while loading my phone and I put in a four diget code number and I don't want it. How can I get rid of it?

Settings, General, Passcode lock, off. You will have to enter the passcode you first entered to be able to turn it off.

How can I handle the EDI_DC40 segment in transport process? Urgent!!

Hi,
my scenrio: File -> PI -> IDoc.
In IDoc Receiver CC the indicators: Apply Control Record Values from Payload, is actived.
Im Mapping the segment EDI_DC40 is also filled. The fields SNDPRN and RCVPRN are mapped via a UDF to get file name.
So far so good.
During transport I meet problem.
The segment EDI_DC40 is set with ALE information of test systems. After transport the segment EDI_DC40 in productive system has also the same ALE information of test systems and the design objects in product system are not allowed to be changed.
It is not good!
How can I deal with this case? At first I change ALE data to productive Systems, then transport them? After transport I change them back to test systems? It is so troublesome.
Anyone has good suggestions?
Thanks and Regards
Rene

Hi Rene,
                  I never tried this signature tab feature. But you are going to set this parameter values then , I think you need to set them separately for test and for production, since they will vary with environment. But if you use the method given by Mahesh, myself or the filename with "prod" attachment (as suggested by you), the EDIDC parameters will be set dynamically. You need not alter or set any values separately for test or production env.
Here is the UDF in case you are determining the value from source directory
public String getDirName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String ourSourceDirName = conf.get(key);
String sndprn;
// say source dir is    /usr/test/inbound
if(ourSourceDirName.indexOf("test")>=0)
      sndprn="XYZ";
// say source dir is    /usr/prod/inbound
else if(ourSourceDirName.indexOf("prod")>=0)
      sndprn="ABC";
return sndprn;
Map this UDF to "SNDPRN" field of target XML.
Ensure the following events
1. Sender Communication Channel has ASMA properties and Directory ticked
2. UDF has no input as variable
I am just sharing my thoughts, and also I am not aware of signature tab(i am working in PI 7.0).
regards
Anupam
Edited by: anupamsap on Oct 5, 2011 2:36 PM

How can we handle the history datas when openscript terminates abnormallly

I'm a new comer for openscript. Now i'm trying to use it to fulfill creating some sales orders and then transafer them to AR module. The orders have many lines, so that I use two databanks,one is for the header datas, and the other is for the line datas.After I book the order ,i save the order number into one global variable,i.e,if there are 5 sales orders,I use orderNum0- orderNum4 to record the created sales orders in script 001. In script 002, I want to get the variable values and then post them to AR.
But if when i'm running script 001, it has created 3 orders and then suddenly terminates. How can I deal with the already created orders ? I know if i want to use them in 002, I can give the global variables orderNum0 - orderNum2 initial values using the new order numbers. But if there are too many datas in the databank,i.e, 100 orders ,and it encounters error after creating 60 orders, how can i proceed ?

hi,
As of now I dont know how to export the data to specified column in the databank, even I'm trying to find out the solution for this.
//**** reading data from the application *****
OrdNumber=forms.textField("//forms:textField[(@name='ORDER_ORDER_NUMBER_0')]").getText();
//**** exporting the data for the file.*****
utilities.getFileService().appendStringToFile("C:\\file_name.csv", "\r\n"+"Order Number: "+OrdNumber);
info("Sales Order #: "+OrdNumber);
After that use this file as input databank to the another script.
Regards,
MRSN

How can I change the event registration layout for registration information entry fields?

Hello,
I want to change the arrangement of the event registration entry fields. For example I want t arrange them into 2 columns and add some comment to them. The template editor doesn't allow to select a specific field. Who can help?

Hello
As far as I know you cannot edit registrations data. What you can do it to contact Toshiba and explain the situation.
For contact use follow mail address: [email protected]
You must contact Toshiba in your country. Contact details can be found at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp
Good luck!
Message was edited by: ADMIN

HT2376 How can I get Quicktime Pro Registration Code if Purchaed over 18 Months Ago?

Quicktime Pro Registration Code Lost. Purchased Quicktime via the web over 18 months so I cannot retrieve it on the View Order History section.
I really don't want to have to by it again!
Please help!
Thanks, Bob

if you have lostthe reg key, the only way to have QTP is to purchase it again.

How can I handle the offline registration codes easily?

Similar Messages

Maybe you are looking for