How can I have a canvas and external controls at the same time?
Typically all the space of an applet is used for 2D or 3D; that is, the applet provides the canvas. I am trying to develop an applet where I only want to use part of the applet space for 3D, and then, outside that space (but still within the applet) I would like to add some controls (e.g. buttons or text fields) to provide some interaction. In other words, I want to have an applet that contains something like a frame for 3D, and some controls outside the frame.
It may be quite easy, but I am very new to applets. Can anyone kindly give me some suggestions? Any help is highly appreciated!
Regards,
Hua
I got it figured out. Thanks anyway!
Similar Messages
-
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
How can i use both Windows and Mac os at the same time on my iMac
How can i use both Windows and Mac os at the same time on my iMac
You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.
-
How can I connect to Oracle and SQL server at the same time?
I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH -
I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1. It seems that I can't record the mic input and the software instrument at the same time. I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
Can someone help?
Thanks,
KurtKurt1997 wrote:
I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
you need to "record enable" both tracks:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How can I have an animation and a rollover on the same page?
I am in need of a webpage that will alternate a section with
five different status images and have simple rollovers with image
swaps in the middle section. How can I make this happen?... thanks
in advance.quote:
Originally posted by:
dannymars
I am in need of a webpage that will alternate a section with
five different status images and have simple rollovers with image
swaps in the middle section. How can I make this happen?... thanks
in advance.
I'm sorry, but you're not clear. You first say you want to
put five images in "a section," then you say there's a "middle
section?"
Can you describe your layout more clearly? Better
yet, could you make a sketch of your layout "sections" and describe
what is to happen in each section? Also, could you clarify what you
mean by "alternate?" -
HT201303 How can I have my iPhone and my iPad with the same Apple ID?
I recently bought an iPad and I want to have it on the same Apple ID that I currently have on my iPhone 5. I want to be able to play my current game (Boombeach), which I started on my iPhone5, on my new iPad. Can anyone help with these problems?
Backup your iPhone 5 to iCloud or iTune and restore backup to iPad.
-
Can I have both V6 and V5 loaded at the same time?
I am going to keep V6 but would like to reload V5.
Is this possible running both versions? When updates for V6 are available I would like to give them a try. But for the time being almost all of my iMovie videos have Gee Slick transitions. Many crash V6 or just turn black and will not render. If it is possible to run both versions I would like to know if there are any pit falls I should look out for.
PowerPC G4 Dual1.42 GHz Mac OS X (10.4.4) 2 GB DDR SDRAMYes, there are several posts here about how to do this. Very quickly . .
If you have already install v6, you will have to remove it.
Then, install v5 and rename the app, so v6 will not write over it.
Now reinstall v6.
Check other posts for how to uninstall.
Clay -
My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back
If you enabled Find My iPad on it before it was stolen, and if it is still turned on and connected to the internet with Find My iPad enabled, you can do this by going to icloud.com as explained here: http://help.apple.com/icloud/#/mmfc0f0165.
-
using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds. i can't therefore have unmuted sounds and unlocked rotation at the same time??
Uh .... Yes you can. You just have to understand how the whole thing works.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Unable to activate internal and external urls at the same time
Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & RegardsHi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this.. -
Can oracle work in shared and dedicated mode at the same time?
Hi All,
can oracle work in shared and dedicated mode at the same time?
ThanksA database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M- -
I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem
First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted -
How do i view itunes store and my library at the same time?
how do i view itunes store and my library at the same time?
apple killed this feature (and i'm really unhappy about this!!). please send a request to apple directly. they obviously don't read this forum. the more people complain about this, the better!
http://www.apple.com/feedback/itunesapp.html -
Can I run a podcast and an app at the same time?
Can I run a podcast and an app at the same time?
Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.
Maybe you are looking for
-
How can I see my book in portrait as a single page of the landscape view??
I created my book in landscape mode and when i realized that in portrait mode i could see only a text flow with the widgets on the left i whas very worried! Do you think i can realize a portrait view of my landscape view single paged??? Thank you so
-
JSP Calendar Wizard/PopUp Window
I am looking for a Calendar Wizard that I can include into my JSP, with the ability to scroll between months, and have the user select a specific date that can be returned to the calling JSP. I do not want to use an Applet, it must be pure JSP/Java c
-
Merging or branching in ABAP codes
Hi experts! Iu2019d like to hear your opinions about how to define a landscape or the best way of working when a system has a high concurrency in the ABAP objects in terms of development. Iu2019m working on a project in what there are small teams wit
-
When my phone is locked, why can I still use Siri to call and text?
So basically yesterday I was playing around on the lock screen with Siri.. And I noticed i can still call, text and search the Internet from the lock screen. Is this supposed to be possible? or a bug Apple have missed in the current version IOS? I
-
TS2771 What should I do about the backspace key/delete button doesn't work?
The backspace/delete key doesn't work on my son's ipod touch. What can I do?