How can I have Firefox 4.0 and a 64 bit version of Minefield installed and make them use separate profile folders?-thanks

I have been using Minefield, the beta version of Firefox 4 , in a 64 bit version. Since the final Firefox 4.0 doesn't seem to have a 64 bit version, I want to keep Minefield, but still would like to try Firefox 4.0. FF4 uses after installation automatically the Minefield profile folder, which leads to problems , mainly because both browsers are not compatible with the same versions of Add-ons. How can I keep them both but make each use its own profile folder?

Thanks. I tried this and it actually works for the desktops shortcuts but when I pin the modified shortcut to the task bar and try to start either of the two firefox versions from there, the profile manager shows up and asks which profile I wanna use.
Is there a way to fix this?

Similar Messages

  • How can I have both genius playlist and regular playlist on my new 160g ipod classic. The list of songs are there, but when I click playlist, I only get the genius playlists.

    How can I have both genius playlists and regular playlists available on my new 160g classic ipod. I can see my entire song list, but no playlist other than the 3 genius playlist I just made.  Also how can I delete a genius playlist. Made the same playlist twice by mistake. Thanks.

    This was not a simple task.  Got it handled.  Had to call Apple support. Apparently, the 160g only syncs the genius playlist.  You have to go in and "tell it" to sync the entire playlist as well as the genius playlists. There is also an option for only syscing certain songs. On itunes, there is two sections; one for the stuff that is synced on your ipod and another separate list for the stuff in your library!  This is exciting for me as I am not computer savvy to say the least. 

  • How can u have lock rotation off and mute feature off at the same time

    How can u have lock rotation off and mute feature off at the same time

    Maybe this will help. The link at the bottom is the same one that was posted above.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can I click on a button and make a text box appear or disappear

    How can I click on a button and make a text box appear or disappear?
    Thanks ahead of time for your help,
    Doug

    Hi Denes,
    I just thought that the example you pointed the OP to, is far more complex than what I understood he needs. The OP was talking about using a button, which I thought was a very basic and simple case. Your example is much more complicated. If memory serves, the radio group item, at the time (prior to 3.1 fieldset) behaved differently, so you needed to create a new value retrieving function, and then was the need to preserve the items show/hide status upon reloading the page. In short, I thought maybe I didn’t see the complexity in the OP post, but it seems that his requirement was indeed a simple one.
    Regards,
    Arie.

  • How can I have the link for downlaod PS PS6 student version ?

    Hello everyone,
    Who can help me ?
    I have already the key product of PS PS6 student version but I lost the installation CD. How can I have the link for downlaod PS PS6 student version ??
    Thanks

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • How can I have a default servlet and an index.html?

    Hi,
    I writing a small webapp to test/understand the 2.2 Servlet Spec. I am deploying this as a WAR to Orion, Tomcat and Silverstream.
    The app's name is: "myapp"
    My application has an index.html, which is listed as the sole welcome-file in the welcome-file-list element in the app's web.xml.
    The interesting thing is that, after adding a default Servlet (<url-pattern>/</url-pattern>), I can no longer access the app's index.html either implicitly or explicitly:
    1. Implicit:
    - http://localhost/myapp
    - http://localhost/myapp/
    2. Explicit:
    - http://localhost/myapp/index.html
    - http://localhost/myapp/index.html/
    All of these invoke the Default Servlet in all 3 app servers.
    Question: How can I have both a default Servlet and an index page?
    Thanks in advance.
    Miles

    you can define it in the web.xml file
    look at the dtd, element "welcome-file-list"

  • TS1538 Have a new ipod nano 7, have music on my pld Windows laptop and myGot a new ipod nano 7. Have music on both Windows 7 laptop and mac. How do i pull music from both and put them on my ipod. Thanks

    Got a new ipod nano 7. Have music on both Windows 7 laptop and mac. How do i pull music from both and put them on my ipod. Thanks

    Yes.
    tomfromlong beech wrote:
    "Remember one one level of subfolders is allowed."  Does this mean that you can have as many subfolders as you want, but they can only be one level deep under the main folder?

  • I have 2 questions (1 every time i open my e-mail it asked me to sign it did not do this before (2 how can i increase the font size and make it defalt

    question (1 every time i go into my e-mail i need to sign in i did not have to do this before please correct this sign in page
    (2 how can i keep my font size to 12.
    thank you joe ruda

    (1) Web site requires you to sign in each time
    Web sites generally remember your browser by a cookie they set.
    If you have changed your cookie settings (for example, by clearing them using Clear Private Data when you close the browser) or installed new third party software (security suite, system cleaner, etc.), you might be clearing the site's cookie.
    In some cases, it's possible that cookies can become corrupted. To clear the site's cookies, when viewing the site:
    "right-click" (Mac equivalent!) and choose View Page Info > Security > "View Cookies"
    In that dialog, you can remove the cookies. After reloading the page, you should be required to log in again and the site will create new cookies.
    (2) Remember font size setting
    Are you using a feature of your email site to increase the font? If the site can't remember that for you, then there might be an indirect solution (a hack) to fix it. Which webmail site is it? There might be a userscript available.
    If you mean Firefox's zoom setting, then Firefox should remember that between visits.

  • How can I have Acrobat Pro v8 and v7 installed but have v7 as default?

    I just re-formatted my hard drive and reinstalled CS3 Design Standard.
    I need the better quality voice to read pdf docs to me. The voice in Version 7 is very much better. Yet when I select a pdf file and go to info, where it shows what will open it -- it WILL NOT let me specify Acrobat 7 permanently. It keeps popping back to Acrobat 8. Same problem before I reformatted the drive and re-installed everything. so the issue is within Acrobat.
    How can I get it to do what I'm asking short of zipping the version 8 file and leaving only Acrobat 7 in my Applications folder?
    This is annoying having to keep Acrobat 8 hobbled.
    Thanks.
    I have OSX 10.4.11 PPC.

    Gosh wish I could proof read what I write and can catch mistakes.
    I'm going to try again. correcting mistakes and I will bold face corrections:
    Try the following This *doesn't* work for the MSOffice2008 but usually does for others.
    On OSX.4.11.
    choose a group of PDF's (more than 5).
    now either control-click or right click on the group and wait for context menu to open up.
    select get *Summary Info* on the group.
    now when get info window is open look for default application.
    If acrobat 8 is selected click on button and locate acrobat 7. release when mouse when 7 is selected.
    Below That will be another button That says make default for all files of this type. click on That button.
    close get *Summary Info window*. Test.
    Now if you need a PDF opened in 8 either open 8 first then choose desired file or if you have the Acrobat 8 icon in the Dock drag and drop document on the icon of Acrobat 8
    IF you retry then Acrobat is like Office2008 setting this has no effect.
    In this case you can highlight the File go to finder menu File and choose open with. you have to wait for a list to be created of applications that will open. Choose desired version of Acrobat or Reader from there.
    Or if you have icon of both Acrobat 7 and 8 in the dock, drop the file on the icon of Acrobat 7.
    See if I did better this time.

  • HT204053 How can I have 3 iCloud accounts and keep all pictures, contacts, messages separate ?

    I have one Apple account and would like to use iCloud. I would like to have 3 iCloud accounts. One for each person in my family. One person has an iPhone3gs, one has a iPhone 4, and I have a iPad and an iPhone 4s. I would like all pictures, contacts, messages to stay separate for each user.
    Can this be done?

    Welcome to the Apple community.
    To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
    To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
    I suspect what you are wanting to do is all share the same account for iTunes and each use your own accounts for iCloud.

  • How can I have firefox install rather than save new apps?

    whenever I need to install any thing, Firefox gives two options to save or cancel. I need neither, I need to install without saving. how can I do that?
    Thanks
    Sam

    Toddzilla,
    There are a couple different ways to append to excel files.  A couple links that might get you going are:
    Can I Add New Data to an Existing Excel File Without Erasing Old Data?
    Append Data to an Excel Document Every Iteration Using Report Generation Toolkit
    Are you trying to write over cells B6 or B7, or are you trying to append within the cell itself?  
    Hopefully this can get you on the right track.  When I append to files I tend to insert rows or append to the end of the file.
    Scott A
    SSP Product Manager
    National Instruments

  • How can I apply color to black and make it accurate?

    Hello,
    I have an illustration that is black, white, and shades of gray. I want to apply a color to the black, and have all the grays become tints of that color. I have tried different blending modes and I have tried monotones, but I don't think either of these techniques are working. When I go back to check the color, it's a different color, and it prints looking different than the color I had selected.
    Do you know how I can make this happen?

    May I suggest:  Layer - New Adjustment Layer - Black & White, then use the Tint facility.
    Personally, I often find it more handy (and providing more control) to use a Curves adjustment layer above all the others.  Grab the curves of individual color channels and pull them this way and that to alter the color of what's underneath.  It's not hard to keep whites white, blacks black, and give the stuff in between believable coloration.
    -Noel

  • How can I read an audio file and brodcast it using NI RFSG?

    Hi everybody,
    I'm designing a wireless audio signal simulation system that will read an audio signal from a file and modulate the signal using NI 5671 RFSG, then broadcast it to be received at an NI 5660 RFSA. 
    All I need is some guidance from you guys. Some related examples would be of great help since I'm a new user of NI hardwares and software.
    Thanks in advance.
    Muslim,
    Communication Engineering Student,
    International Islamic University Malaysia. 

    Hi,
    I’m going to
    help here since Paul is out of the office, so far you have been able to use
    Paul’s example to generate a signal from a Wav File, right? I have a question:
    why did you combine some of the parts of the (fm-modulation) with the generate
    FM signal from WAV file if the example Paul attached is already modulating the
    signal?
    I have another question on the part
    that you are stuck when reading the file, do you want to play it back through
    your speakers or you just want to be able to see the array of samples? Have you
    seen the example “MT niRFSA Demodulate FM.vi”? And if so why it does not help? Here
    is another example for FM modulation: Sound File Frequency
    Modulated Generation using NI-567x I would like to let you know that all
    those examples Paul and I are giving you are located at our website most are
    free and you may find them yourself; if you have the necessary drivers and
    toolkits installed you should be good to go. “The examples
    available do not show what I'm searching for” What are you
    searching for? What type of analysis do you need to perform?
    Remember
    that in the RFSA part of your project what you are going to be receiving will
    be an array that contains all the points of your data not a WAV file. I will suggest trying to
    run both FM example the RFSG and RFSA with no modification for a better
    understanding of what is happening.
    I hope it helps
    Jaime Hoffiz
    National Instruments
    Product Expert
    Digital Multimeters and LCR Meters

  • How can I include podcasts in playlists and transfer them to my ipod?

    How can I transfer playlists that include podcasts to my new ipod classic? The playlist on itunes includes them, but they do not transfer to the ipod.

    Not sure-can you transfer your Library to another Computer

  • How can I select videos (only videos) and export them from iPhoto?

    I know how to export one movie at a time from iPhoto, but I want to export all (or a bunch) of videos at a time.  They are mixed in with photos, and on many many different dates.  Is there a way to find only the movie files and export them as original files?  I my macbook is full and if I export iPhoto stuff as a batch the videos end up being reduced to one frame only (the sidecar file).  Please advise.  Thanks!!

    MacBook Pro
    Moving Your iPhoto Library External Drive
    iMovie Tutorials
    iMove Unofficial FAQ

Maybe you are looking for