How can I have firefox install rather than save new apps?

whenever I need to install any thing, Firefox gives two options to save or cancel. I need neither, I need to install without saving. how can I do that?
Thanks
Sam

Toddzilla,
There are a couple different ways to append to excel files.  A couple links that might get you going are:
Can I Add New Data to an Existing Excel File Without Erasing Old Data?
Append Data to an Excel Document Every Iteration Using Report Generation Toolkit
Are you trying to write over cells B6 or B7, or are you trying to append within the cell itself?  
Hopefully this can get you on the right track.  When I append to files I tend to insert rows or append to the end of the file.
Scott A
SSP Product Manager
National Instruments

Similar Messages

  • How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?

    While using firefox I am using, private browsing and not remembering any passwords.
    When I login to Gmail, the login page shows option to type in my gmail id and then password, and at the bottom, it gives the option of checkbox to remember the password next time. NOW, the problem is that, THIS CHECK box is always TICKED (Checked). I don't want it to be checked at all.
    So How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?
    Thank you so much.

    Hi Imran_Afzal, if you know that setting the cookie has no effect after you close your private browsing session, is it really worth finding a hack to clear the checkbox?
    I believe in order to do that you would need to use an extension or userscript. However, I haven't searched for one.
    ''Note: When searching for a userscript on userscripts.org, be very cautious as many hacked scripts have been posted lately. Check reviews and check the code to make sure it only runs on your Google site before installing.''

  • I have  anew computer and my ipod was attached to the old one, how can i have my music download to the new computer and sincronize it.

    I have  anew computer and my ipod was attached to the old one, how can i have my music download to the new computer and sincronize it.

    If you no longer have the old computer this will be very helpful and If you have other content - apps, books, movies, that you want to transfer to the iTunes library - you need to transfer your purchases from the iPod to the computer as well.
    Take a look.
    https://discussions.apple.com/message/16153193#16153193
    This works the same way whether you have a Mac or a PC.

  • How can I get Firefox to automatically open a new search in a new tab please?

    How can I get Firefox to automatically open a new search in a new tab please? [Without me manually opening the tab]

    For searches from the Search Bar, when you use the Enter key.
    Type '''about:config''' in the URL bar and hit Enter. <br />
    ''If you see the warning, you can confirm that you want to access that page.''
    Pref = '''browser.search.openintab''' = double-click to toggle to '''true'''

  • After logging in the Apps tab has removed Lightroom 5 from my Installed Apps - even though I have it installed.  The Find New Apps section prompts me to install Lightroom - but if I do that, what happens to my existing catalogues?

    After logging in,  the Apps tab has removed Lightroom 5 from my Installed Apps - even though I have it installed.  The Find New Apps section prompts me to install Lightroom - but if I do that, what happens to my existing catalogues?

    See this Apple Best Practices Guide, about half way down the page:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    It gives the recommend procedure.
    MtD

  • How can I have Firefox 4.0 and a 64 bit version of Minefield installed and make them use separate profile folders?-thanks

    I have been using Minefield, the beta version of Firefox 4 , in a 64 bit version. Since the final Firefox 4.0 doesn't seem to have a 64 bit version, I want to keep Minefield, but still would like to try Firefox 4.0. FF4 uses after installation automatically the Minefield profile folder, which leads to problems , mainly because both browsers are not compatible with the same versions of Add-ons. How can I keep them both but make each use its own profile folder?

    Thanks. I tried this and it actually works for the desktops shortcuts but when I pin the modified shortcut to the task bar and try to start either of the two firefox versions from there, the profile manager shows up and asks which profile I wanna use.
    Is there a way to fix this?

  • I synced with iMac itunes and got many more contacts than I want on the iPhone. How can I delete multiple contacts rather than having to do so one at a time?

    I synced my iPhone with itunes and iMac and got many more contacts than I wanted on my iPhone. How can I delete quite a few of them at one time as opposed to deleting one at a time?

    iTunes does not handle the import of photos/videos from the iPhone's Camera Roll.
    If this is not the computer you sync your iPhone with, you should have been provided a warning message that your iPhone is associated with an iTunes library on another computer and when trying to transfer any iTunes content from a different computer, a warning message is provided indicating that all iTunes content on the iPhone will be erased first.
    When connecting an iPhone to iTunes on another computer, none of the options under the various tabs for the iPhone sync preferences with iTunes are selected automatically. This means you had to select Sync Contacts under the Info tab for your iPhone sync preferences with iTunes on your wife's computer.
    Assuming you are syncing contacts with a supported address book app on your computer, connect your iPhone to Tunes on your computer and without syncing, under the Info tab for your iPhone sync preferences below the Advanced section, select Contacts for replace info on this iPhone followed by a sync.
    For importing photos/videos from the Camera Roll which can be done with a computer that is not used for syncing the iPhone since syncing with iTunes is not involved.
    http://support.apple.com/kb/HT4083

  • How can I have Firefox in English ONLY please!!!!

    I want to download Firefox in English, however, I am in Spain and the browser is automatically downloaded in Spanish, is there a way to resolve this issue?

    have you tried setting the default language to English under system preferances?

  • How can I append excel file rather than replace it?

    Hi,
    I have the attached VI set to write data to Excel, One case structure sends the data to cell B6, the other sends the data to cell B7. The problem is, the data is deleted from one cell when new data is added to another.
    I think I want to be able to append the data without deleting other cells. Any ideas?
    Thank you
    Todd
    Attachments:
    Flow meter write to Excel question.vi ‏180 KB

    Toddzilla,
    There are a couple different ways to append to excel files.  A couple links that might get you going are:
    Can I Add New Data to an Existing Excel File Without Erasing Old Data?
    Append Data to an Excel Document Every Iteration Using Report Generation Toolkit
    Are you trying to write over cells B6 or B7, or are you trying to append within the cell itself?  
    Hopefully this can get you on the right track.  When I append to files I tend to insert rows or append to the end of the file.
    Scott A
    SSP Product Manager
    National Instruments

  • When closing how can I close each tab rather than multiple/all tabs

    I click the X to close and the pop up choice is all actually the number of open tabs (3 or 4 etc) or cancel. When I use Internet Explorer I can close each one at a time. "close all tabs or just this one" until all are closed

    I don't know whether that is a built-in option.
    Perhaps you can get used to a different way of closing tabs... You should have a small "x" on each tab, or you can right-click a tab and choose Close Tab, or you can press Ctrl+w to close the currently displayed tab. What do you think?

  • Can you run Firefox 21 rather than Firefox Nightly on Windows 8?

    Just wondering if you can run the regular version of Firefox 21 on Windows 8???

    Yes. in the very near future we will be adding full metro support to Firefox release, but there are still some final things we need to do to make that happen.

  • WHERE AND HOW CAN I HAVE AND INSTALL msvbvm50.exe IN MY LAP?

    I NEED THIS DOLLAR TO RUN A PROGRAM , AMD I DO NOT KNOW WHERE CAN I GET IT AND INSTALL

    Read this: http://support.microsoft.com/kb/180071
    It includes a download link that appears to work.
    Here's the download link:
    http://download.microsoft.com/download/vb50pro/utility/1/win98/EN-US/Msvbvm50.exe

  • How can I have Firefox remember my preferences for a specific website?

    Specifically, on yelp's website, when searching for something, there's a mini map that has an option for a checkbox to "redo search in map." Every time I open a new tab or window, I have to check that box. Yet, in Safari, it remembers that I checked it.

    Edit > Preferences
    OR:
    Tools > Options
    then go to Security, and next to "Remember passwords for sites" you'll see an "exceptions" button. Click on it and remove the sites that you want.

  • How can I have SAP to identify third party new hires as a new employee?

    Hello,
    Situation:
    Our company has changed our vacation quota policy for new hires.  In 2011, new hires did not receive any vacation their first year.  In 2012, that policy has changed to give them vacation based on how many months are left in the year.  Example:
    If hired Jan 1 - June 30 = 80 hrs, July 1 - Oct 31 = 40 hrs, Nov = 24 hrs, Dec = 0 hrs.  I have configured the Rules for Generating Absence Quotas to make this happen, however we've discovered a slight problem.
    If a new hire has never been in our system, the logic works perfectly, however, in the case of third party employees, they are already in the system, thus have a Actions infotype with their third party onboarding hire date. At this point they are defined as employee group = 3.  After 90 days, we hire them as a production employee, employee group = P, so now they are now a company employee.  When they process through the generation rules, the system does not recognize they are a new hire employee because it uses their Actions entry date based on their third party onboarding entry.
    Question:
    When determining seniority, I'd like the system to use their third pary new hire action and not the third party onboarding action. Does anyone have a solution or suggestion?

    I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041.  It compares Today to the vacation elig. date and if they match, set a time type indicator to 1.  I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours.  Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage.  In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

  • How can i batch resize a pdf  than save from one folder to a bmp in another folder?

    At the moment I can get it to work but it is just using one document name and not the individual file names?

    Not absolutely sure but I think Actions would struggle with this because the files can not be opened but has to be converted.
    Image Processor does not offer bmp, maybe you should check out Image Processor Pro.
    http://www.russellbrown.com/scripts.html
    Or use the regular Image Processor to create tif or psd and then open and save those as bmp …
    Why bmp anyway?

Maybe you are looking for

  • Dbca problem on rh 7.2 and 7.3 with Oracle 9.2

    hi! i have problems using dbca on my redhat 7.2 and redhat 7.3 machine with fresh installed oracle 9i release2. installation succeded with no problems, but now i have problem creating database with dbca. however, when i type dbca & as user oracle, i

  • SSRS - How to display all the results from a query and then be able to filter the data

    Let's say I have a simple query that will return products name, ID, price SELECT pname, pID, price FROM products When I display the results in SSRS the user will (without entering any parameters) see something like: Product Name | ID | Price xyz    

  • Display XML in DWMX2004 page

    I've been able to create a valid XML doc. I wanted to display the data inside a DWMX2004 templated page. Tried the standard things on WC3 and other XML books and resources and did not have any luck. (Most of it is over my head, parsers, js and the li

  • Why can't I use a pointer as an argument?

    Here is an example of a function... // Function prototype int foobar(unsigned int a, int *b); // Function int foobar(unsigned int a, int &b)     // Acquire some data... then     b = Data[a]; I get the following error: 73, syntax error; found '&' expe

  • Anyone have a solution for the problems with Maverick iMovie?

    I made the upgrade to Maverick and expected to have a bit of a learning curve but not a total revamp of basic stuff.  I have  a LOT of video files and when iMovie made the conversion, my files were so jumbled I couldn't make heads or tails of where t