How can I have IMessage and SMS in the same thread

My boyfriend has an iPad mini and a non Apple phone that sends SMS. I know have two separate threads in messages, one for iMessage and one for SMS. Even though I have added his email that is used to send iMessages to his contact on my phone, it is still showing as two different conversations on my phone. Is there a way that I can see both types of message as one conversation? I hope this makes sense.

Similar Messages

How can I have podcasts and music in the same playlist in iOS7?

How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
I can only think of these solutions:
Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast.
Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
I can only think of these solutions:
Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast.
Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

How can I have another Itunes account on the same computer for my wife?

How can I have another Itunes account on the same computer for my wife?

In case you didn't fully understand what dallon meant, it means another user account on your computer. You set that up in Windows and then instal iTunes onto that account.
That way, you each have your own desktop and your own itunes. You can link to the songs in the other person's library as well, but you cannot run both iTunes at the same time. (That simply means you need to close it on the first account before opening it on the second account.)

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can you have pages and word on the same computer

can you have pages and word on the same computer

Sure, I do (my Office is 2008 but I keep it around for some things I get from work).

How can I have two PDFs open at the same time next to each other?

How can I have two PDFs open at the same time next to each other?

Moved to Adobe Reader for iOS.
The only way I know how to do that is with two iPads.

HT201287 iMessage and SMS in the same conversation?

My iMessage and SMS conversations are not linked in the same conversation. How can that be? I have linked my Apple ID and my phone number already, so I can't find the problem... Anyone out there who might be able to help?

You may have had your email checked for the iMessage conversations
At any rate - the conversations cannot be merged on your phone
If you leave only your phone number checked - the SMS and iMessage conversations merge into one

How can I have 2 webpages open at the same time?

With my previous IP I could have 2 websites open at the same time, useful when making comparisons. I'm sure there must be a way to do this with Firefox but I can't find it.

Open the first website you want and then click on "file" and then on "new window." Another window will appear so now you have 2 windows on your screen. Reduce the two windows so that they both fit on your screen. Now click on the edge of either window and then on the book mark of the website you want and that website will appear in that window, and do the same thing on the other window for a different book mark, OR type in a different website name in each of the windows and you will get those websites in the respective windows.
I know...it seems so easy, but I had to ask someone else how to do it too !

How can I write left and right in the same line of a richtextbox?

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks
As
Viorel_ says "Perhaps there are other much easier solutions. For example, create two
RichTextBoxes with no borders (if you only need two columns of text)" but the real issue would be saving the info in the RichTextBox's (RTB's) RTF or Text to two different RTF or TextFiles. Although I suppose if it was just going to
a TextFile then you could somehow use a delimited text file so each same line number of each RTB is appended to the same line and delimited. That way you could probably load a split array with each line from the text file splitting on the delimeter per line
and providing RTB1 with index 0 of the split array and RTB2 with index 1 of the split array. I'm not going to try that.
This is some leftover code from a long time ago. It has three RTB's. RTB1 is there I suppose because the thread asking for this code wanted it. RTB2 is borderless as well as RTB3. The Aqua control in the top image below is the Panel used to cover RTB2's
scrollbar. So RTB3's scrollbar is used to scroll both controls.
I forgot to test if I typed past the scroll position in RTB2 if both would scroll as maybe RTB3 would not since it would not have anything to scroll to I suppose.
Maybe this code can help or maybe not. The bottom two images are the app running and displaying nothing scrolled in RTB2 and RTB3 then the scroll used in the bottom image.
Disregard the commented out code in the code below. It was there so I left it there. I suppose you should delete it. Also I didn't set the RTB's so one was left aligned and the other right aligned. I believe the Panel becomes a control in RTB2's controls
when it is moved to cover RTB2's vertical scrollbar but don't remember although that seems the case since both RTB2 and RTB3 are brought to front so if the Panel was not one of RTB2's controls I would think it would be behind RTB2 and RTB2's vertical scrollbar
would display but don't remember now. In fact I don't really remember how that part works. :)
Option Strict On
Public Class Form1
Declare Function SendMessage Lib "user32.dll" Alias "SendMessageW" (ByVal hWnd As IntPtr, ByVal msg As Integer, ByVal wParam As Integer, ByRef lParam As Point) As Integer
Const WM_USER As Integer = &H400
Const EM_GETSCROLLPOS As Integer = WM_USER + 221
Const EM_SETSCROLLPOS As Integer = WM_USER + 222
Dim FixTheProblem As New List(Of String)
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CenterToScreen()
Panel1.BackColor = Color.White
Panel1.BorderStyle = BorderStyle.Fixed3D
RichTextBox2.BorderStyle = BorderStyle.None
RichTextBox2.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.BorderStyle = BorderStyle.None
RichTextBox3.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.Size = RichTextBox2.Size
RichTextBox3.Top = RichTextBox2.Top
RichTextBox3.Left = RichTextBox2.Right - 20
Panel1.Size = New Size(RichTextBox2.Width * 2 - 16, RichTextBox2.Height + 4)
Panel1.Left = RichTextBox2.Left - 2
Panel1.Top = RichTextBox2.Top - 2
RichTextBox2.BringToFront()
RichTextBox3.BringToFront()
FixTheProblem.Add("Curry: £6.50")
FixTheProblem.Add("Mineral Water: £4.50")
FixTheProblem.Add("Crisp Packet: £3.60")
FixTheProblem.Add("Sweat Tea: £2.23")
FixTheProblem.Add("Motor Oil: £12.50")
FixTheProblem.Add("Coca Cola: £.75")
FixTheProblem.Add("Petrol Liter: £3.75")
FixTheProblem.Add("Shaved Ice: £.50")
FixTheProblem.Add("Marlboro: £2.20")
FixTheProblem.Add("Newspaper: £.25")
FixTheProblem.Add("Spice Pack: £.75")
FixTheProblem.Add("Salt: £.50")
FixTheProblem.Add("Pepper: £.30")
For Each Item In FixTheProblem
RichTextBox1.AppendText(Item & vbCrLf)
Next
RichTextBox1.SelectionStart = 0
RichTextBox1.ScrollToCaret()
Dim Fix As String = ""
For Each Item In FixTheProblem
Fix += Item.Replace(":", "^:") & vbCrLf
Next
Fix = Fix.Replace(vbCrLf, "^>")
Dim FixSplit() As String = Fix.Split("^"c)
For i = 0 To FixSplit.Count - 1
If CBool(i Mod 2 = 0) = True Then
RichTextBox2.AppendText(FixSplit(i).Replace(">"c, "") & vbCrLf)
ElseIf CBool(i Mod 2 = 0) = False Then
RichTextBox3.AppendText(FixSplit(i) & vbCrLf)
End If
Next
End Sub
Dim RTB2ScrollPoint As Point
Private Sub RichTextBox2_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox2.VScroll
Dim RTB2ScrollPoint As Point
SendMessage(RichTextBox2.Handle, EM_GETSCROLLPOS, 0, RTB2ScrollPoint)
SendMessage(RichTextBox3.Handle, EM_SETSCROLLPOS, 0, New Point(RTB2ScrollPoint.X, RTB2ScrollPoint.Y))
'Me.Text = RTB2ScrollPoint.X.ToString & " .. " & RTB2ScrollPoint.Y.ToString
End Sub
Private Sub RichTextBox3_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox3.VScroll
Dim RTB3ScrollPoint As Point
SendMessage(RichTextBox3.Handle, EM_GETSCROLLPOS, 0, RTB3ScrollPoint)
SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(RTB3ScrollPoint.X, RTB3ScrollPoint.Y))
'SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(0, 10))
End Sub
End Class
La vida loca

How can i have to windows open at the same time

i have to applications open and i want them on the same window at the same time but these little triangles show up and only allow me to have one open on my screen, i was able to before however. How can i change this?

Open the first website you want and then click on "file" and then on "new window." Another window will appear so now you have 2 windows on your screen. Reduce the two windows so that they both fit on your screen. Now click on the edge of either window and then on the book mark of the website you want and that website will appear in that window, and do the same thing on the other window for a different book mark, OR type in a different website name in each of the windows and you will get those websites in the respective windows.
I know...it seems so easy, but I had to ask someone else how to do it too !

How can you have all pages open at the same display size, instead of having to hit Ctrl+ to get the size you want?

In IE the page can either be set to 100% or whatever you wish, and once set future pages open up displayed the same way. With FF every time I open a page I have to hit ctrl+ about 3 or 4 times to get it to fill the screen
I have tried changing the default font to 16 with a min of 16 and not letting the page decide etc. I am sure that this has been asked before, but I have not used FF in several years.
Thanks

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Can you have IDM and GRC on the same stack?

HI, I am new to IDM and am a Netweaver Basis professional with some performance experience around GRC. Is it wise to place the two together on the same stack?
The customer will have 190,000 employees and lord knows what the roles will look like at this stage but I'm just a bit worried as I have seen the GRC jobs run for an awfully long time with a lot less users/roles and chew things up a bit
the right advice appreciated.

Now thats interesting.
My architect told me that we were using the 7.1 version but in affect it runs on a 7.0 J2EE.... perhaps he is having me on. If you know for sure then let me know.... regardless I'll have a dig in the documentation.
Naturally having Project and dev share with GRC should not be considered an issue but having production, pre-production and validation instances running combined with GRC is my concern as I have seen the GRC really slow up the system. The argument they are saying is the heavy jobs will run overnight and mostly just collection and configuration of GRC during the day. They are intending to run in production with 2 instances of 3 servers.

How can I use REQ1 and REQ2 at the same time to send two different groups of data to two blocks of buffers?

I want to use REQ1 to send data1(16bits) in th rate of 10MHZ to buffer1 and REQ2 to send data2(16bits) in the rate of 1KHz to buffer2. The first part(sending data1) has been done(using the attached file).How to re-cofigure the ports to send data2 to buffer2?
Attachments:
DIsingleBufExtTrig653x.C ‏6 KB

Greetings,
Essentially, this is a matter of duplicating this code for use with the second group. However, be certain to change the group parameter to 2 for the function calls being used with the second group.
Good luck with your application.
Spencer S.

I changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?

i changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?
i have tried signing out of imessage and signing back in. (when i do that and am asked to select my email adress, i see my new number but it is greyed out and i cant select it)

But under send and receive, my old number is still displayed while my new number isn't.

How can I have IMessage and SMS in the same thread

Similar Messages

Maybe you are looking for