How can I have permission to install DVD system for 2 computers?

How can I get a permission to install my DVD system Snow Leopard into 2 computers of mine?

If these are the original DVD;s that came with the system then they can only be used on that system.
If they are other DVD's post back.

Similar Messages

HT1386 How can I have two seperate sets of Playlists for two different iPods on one computer?

How can I have two seperate sets of Playlists for two different iPods, on the same PC?

Open itunes.
Make whatever playlists you each like.
Connect one ipod, select only what you want, sync
Do the same for the other ipod

How can I order OS X v10.7 Lion for two computers? One Macbook and one Imac.

How can I order OS X v10.7 Lion for both my MacBookPro and my Imac?

Install 10.6.8 on one computer to access the App Store, purchase, and download Lion. You can install on all the computers you own. Although you can re-download Lion after you purchase it, you may prefer the following:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

How can I tell if an install DVD is a family pack or a single-user?

I'm now running Tiger, and want to install Leopard. I can't go to Snow Leopard because my processor is powerPC -- not Intel.
I have purchased a new Leopard install DVD from a seller on Ebay. I paid for a family pack. It does not say "family pack" anywhere on the package, which is sealed in clear plastic. I asked the seller why it didn't show "family pack" anywhere visible on the package. He "guaranteed" that it is a family pack, not a single user license.
I've looked at a family pack DVD for Tiger and for Snow Leopard. Both show "family pack" on the exterior of the package, but I don't see anything on the face of the DVD.
Is there anyway that I can confirm whether the seller is being truthful? If I open the package, and it doesn't show anything on the face of the DVD . . . . how can I tell if it really is a family pack?
Thanks for your help.

My Leopard came pre-installed, so I don't have a retail package to examine. However, doing a google image search for family packs, I couldn't find any obvious difference on the outside or inside between the two. Here, for example, is someone who says he bought a family pack and photos of the inside of the box including the DVD:
http://www.flickr.com/photos/robertnelson/2211524221/
Notice, no "family pack" to be seen anywhere.
The only difference, as I understand it, between the family pack and the single-user pack is the number of license you pay for. If you paid (a third-party) for a family pack license, then I feel you can in good conscience install the OS on up to five computers in your house or that otherwise meet the terms of use for a family pack. The OS will not seek out duplicate serial numbers on your network or anything like that (even single-user installs rely on the honor system) so you will be fine.

How can I download the Applications Install DVD

Is there a way to download the Applications Install DVD? My disk got damaged.

You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

How can I use the MPEG-2 DVD format for video rendering?

I have been trying to make a DVD out of my brother's wedding footage, but I've run into a wall. I would like to render out my footage in the .M2V format (MPEG-2 DVD), but I'm not given the option to use it. The only MPEG format I'm given is the .H264, and that doesn't work as well. How can I install the .M2V codec?

You should either:
Render to a suitable production codec and then compress for DVD in your authoring application.Use the Render Cue to render a PhotoJpg at NTSC or PAL file using default frame sizes for your AE rendering composition, then drop in Encore for authoring.
Open your AE project in Adobe Media Encoder, pick the composition you want to render from the list and pick the MPEG 2 for DVD preset.
Open Adobe Encore, select File>Dynamic Link>Import After Effects Composition and then set up your timelines and menu's as you like and select Build DVD.
All DVD authoring programs will compress standard def video in just about any format for DVD. After Effects, however, will not do multi-pass rendering which is required for high quality MPEG compression.

How can I have a custom output file destination for each different preset?

Hey guys,
I have a bunch of presets in AME but I need to have each preset export to it's own folder. How can I do that? This was a really simple thing to do in Compressor but in Media Encoder is seems like I can only specify one output file destination for the whole application in general and everything gets exported to that folder. Can anyone help me with that please?

This is a user to user forum. It is not staffed by Adobe employees so you will not always get a direct response from Adobe.
That being said, the output destination is not tied to the presets so this is not possible without a little extra work. You can change multiple output destinations by selecting multiple jobs and then clicking on one of the output locations to update them all. Another way to set this up would be to use watch folders.
This is a feature request are aware of but if you would like to add your vote for it, please add that request here: Adobe - Feature Request/Bug Report Form

How can I have a use a variable view for a Popover in Xcode Applescript-ObjC?

I'm adding Popovers to my application, but I have it coming from buttons in different views. One button might be in a Tab-View, and one in the main window. If I specify the wrong view, the Popover is off to the left and down, like the image below:
Here's my code:
on OpenPopover_(sender)
Popover's showRelativeToRect_ofView_preferredEdge_(sender's frame(), MainWindow's contentView(), current application's NSMaxYEdge)
end OpenPopover_
How can I use a variable view or not specify the view at all so that the buttons can be in different views without having to use multiple pieces of code, using Applescript-ObjC, Xcode?

You are using the content view of the entire window instead of whatever view the button is in - the frame rectangles are relative to the view it is in.
The method parameters are a rectangle that is relative to the view (to position the popover), the view containing the rectangle, and the edge of the rectangle to use. To position relative to a button, you can get the button's superview (the containing view), for example:
popover's showRelativeToRect_ofView_preferredEdge_(sender's frame(), sender's superview(), current application's NSMaxYEdge)

How can i get a replacement install dvd

Just acquired a used G4, with no disks. Want to perform a fresh install to wipe out all old data.

Hi, and welcome to Apple Support Communities.
Which exact iBook model is it?
You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Apple may not have the replacement discs at this point, but it's worth a try. You could try giving Apple a call and see if they have them available. If they do, they will send them to you for a fee.
You will need the serial number of the iBook when you call.
http://support.apple.com/kb/TA27282?viewlocale=en_US
Good luck.

HT1430 I already own an iPhone & have purchased and iPod touch for my husband. How can I have a completely separate Apple ID for both of the devices?

I have purchased an iPhone 4s 2 years ago and recently purchased an iPod touch for my husband while he was abroad working. I used the same Apple ID when setting up the iPod touch but now I want to know how I can have two separate Apple IDs. One for his iPod touch and one for my iPhone?

Create a new ID and start using it.
You will not be able to transfer your existing purchases and updates will require knowing the password for the old ID.

How can I have a different default reply account for iCloud mail?

When I reply to emails on my iPad that came from the iCloud server the replies are from my iCloud account unless I manually select the @gmail.com account in the dropdown list. I want all replies to automatically default to the gmail account. Is this possible? I have set the default account as the gmail account but it is not working the way I want. On my Macbook it does work!

Hi maus100,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Configuring additional outgoing mail servers
http://support.apple.com/kb/ht4519
Tap Settings > Mail, Contacts, Calendars.
Setting called Default account. change what you want to send from.
Best of luck,
Mario

I am trying to do a blank composition widget, but it keeps ignoring my state changes for the trigger. How can I have my state changes still work for things placed in the trigger?

So below is what I have so far. The menu is working perfectly, thanks to a few Youtube tutorials. And everything is linked correctly. But the only thing is that the "WORK" button doesn't respond to the state change that is set up for it. I tried applying the state change before I placed it in the trigger area, and after. Neither seems to make it work.
The goal state change is basically that the text "WORK" will turn white, and the white space within the teal stroke will also turn teal. So, the colors will reverse. I have a link next to it, "ABOUT" that is currently successfully doing it. I guess if it's not possible then I will have to figure out another design..but I'd like to see if there is a way to do it!

I believe you are trying to get a color state for composition when its active ? please publish the site and provide the url to have a look.
Thanks,
Sanjit

[solved] (how) can I use my laptop as a router for other computers?

First of all, I have to admit that I do not know too much about networking. Just enough to make the simple things work properly.
I have a laptop, which accesses the internet by wireless lan. The router is in my downstairs office. So far so, good, I have a media computer (both running Arch) in my room upstairs, intended to watch dvds or internet tv on the tv screen.
Connecting this computer to the downstairs-router by cable is not possible. Now I wondered, if I really needed to buy a wlan-card (any suggestions which one works well with linux?) or if there might be an (easy) solution using my laptop as (sort of) a router, connecting them by cable and establishing a lan connection between both of them.
Is it possible, to get internet access on the media computer that way, without to much effort? And what do I need to do to get it working?
Last edited by saciel (2008-07-07 01:13:05)

Well, I tried to set it up to day, realizing that it is probably not as easy as it appears to be.
I did everything according to the wiki but from the laptop I can access either the internet OR the other computer, but not both at the same time. It seems to depend on which network profile I activate first.
If I first activate and configure the ethernet card, I can acces the other computer (I tried ping and ssh), but if I then start the wlan profile I cannot access the internet on the laptop. If I start the internet profile first and then configure the ethernet card, I cannot ping the media pc anymore.
I'm not sure what could be wrong, as I just did everything according to the wiki entry. Ideas?

Hi - have lost my Install DVD for my macbook Pro - can I use the one from my husbands Macbook or how do I get a new one??

Hi
Have lost my Install DVD for macbook pro and need it because my computer black out all the time - can I use the one from my husbands macbook (not pro) or how do I get a new one???

10.6 Snow Leopard ?
You can call Apple and order one. 1-800-275-2273
You cannot use an install dvd that is shipped with another computer.

How can I burn a movie to dvd when I don't have iDVD on the new macbook pro?

I have recently purchased a macbook pro and I have made a movie in iMovie, however i don't have iDVD as it no longer comes on macs so how can I burn this movie to DVD without this program? Is there a program already on my laptop or do I need to purchase one and if so what can I purchase?

ToastTitanium from roxio
http://www.roxio.com/enu/products/toast/titanium/overview.html?ClickID=dxsztmmzk 0ookbzn2brmtsr2hcomcnhysxrs

How can I have permission to install DVD system for 2 computers?

Similar Messages

Maybe you are looking for