How can I have two pages in the same Oracle Drive Path?

I have been using OracleDrive for some time to publish a specific kind of document once every week.
Now I have on my front page a content area that show the newest 3 of these documents. However, I'd like to place a link at the bottom that says "Show All", and that should link to a page that shows all my items in this folder.
So basically I want to have two pages that are based on the same folder..
How can I achieve this behaviour?
Thanks,
Botzy

Greetings,
When you say two monitors do you mean two separate computers (like 2 iMacs)?
If you mean 2 seperate macs then you could either:
Use a network keyboard / mouse sharing program like Teleport: http://www.macupdate.com/app/mac/14042/teleport
Use a physical KVM switch: http://www.belkin.com/IWCatProductPage.process?Product_Id=267031
Hope that helps.

Similar Messages

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can I have two iPhones with the same apple id recieve the conversations from each phone.

My girlfriend and I want to be able to see each others conversations while they're happening. We made an apple id we both use, now what?

Will it created any problems...
if i download a paid apps on one of my iphone ,......will it be avaible on the second iphone (free)
what if i dont wanna sharge the apps & game, thanks.....

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Can you have two iPods on the same account

I have an Itouch and an old classic that I want to load different music on. Can I have two ipods on the same account? Thanks

I have a iMac, MB Pro, iPad 1, iPad 2, iPad Mini, iPod 4th all on the same iTunes account. Is that what you mean?

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

How can i make two ipods use the same apple id

How can I make two ipod touchs have the same apple id

If you haven't already set up your two iPods either make and apple I'd on one and on the setup on the other type on your apple ID by setup I mean when you first get it it asked you questions so when your done answering the questions your iPod is ready to be used

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

How can I produce two outputs of the same project

Dear Sir,
My aim is to produce two outputs of the same master project,
HTML help and Webhelp each one will be used differently in my
compnay.
Producing two outputs is fine but the problem was that
external links are done differently for HTML help and Webhelp and
as I Knew from you that this can be solved using conditional tags.
Actually I am new to conditional tags and I don't know how to
use them. Could you please help me to do this or recommend a link
on how to use condtional tags to produce different outputs.
Thank you very very much

Hi there ahlam323
See if the link below helps any. Some goober wrote something
on it.
Click
here to read the goober's guide
Cheers... Rick

How can I connect two PS3 to the same Linksys WRT54G correctly

Hi,
i'm trying to connect two PS3 to the same routeur without having conflicts. Everytime i try to update my game softwares it tells me error 80710723 or now 8002AD23. I gave the two PS3 different IP adresses, i opened all the ports that Playstation suggested me to open (http://playstation.custhelp.com/app/answers/detail/a_id/241) and gave them different DNS adresses but still they cannot download any software content without bugging the console. I also use a PC, Tablet and Phone with my wireless connection.
thank you
-François

Well in this case the error code (80710723 ) is generated when the internet connection is slow. So you can try the following step:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
# Make the Channel Width to 20 MHz only and Channel to 6, 9, 11..
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 75
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2304

How can I start two Vi at the same time?

I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG ‏44 KB

Can you have two services on the same IP within the CFE?

Hi,
I am testing AccAD and have come across a situation where we have two HTTP SAP systems, one portal and one SRM, that have the same destination host, ie http://testapp. But a end user will access each system via the URL's http://testapp:9010 and http://testapp:9015.
I can get AccAD to connect to both different apps by changing the DNS but inside one of the apps it will call the other using http://testapp:9010. so unless I change the internal config one app can not call the other.
So what I would like AccAD to do is call app1 via http://testapp:9015 and the other via http://testapp:9010 where defined in AccAD the hostname testapp is the same IP address.
Any clues and sorry if the problem explaination is confusing?
Regards
Brian Lane

Hi Brian,
I checked your question with the development team, and here's the response:
If you define 2 service types under the same server then you will have delivered services on the same IP address.
The only thing that you need to consider is that the 2 service types will have the different ports.
Define one service type with port 9010 and another one with 9015.
After this step, as usual, please add both service types to the server and define remote offices.
On the CFE you can then do: netstat -ntl
You will see the same IP address listening to 2 different ports.
Hope this helps, best regards
Jana Richter

How can I sync two Bolds with the same contacts?

I have two bolds and are trying to sync them both with the same contact list.
The first bold has all the contacts and I sync that phone using the BB Desktop manager setup with Outlook Express main identity.
When I try to sync the second bold with the same setttings, outlook express and main identity, none of the contacts transfer to the new bold, why?
What is the best way to sync two phones to the same contact list?
Claim your missing money with foundmoney.com today Missing money

Any solutions to this please ????
Claim your missing money with foundmoney.com today Missing money

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How can I sync two iphones to the same itunes account without deleting

My husband & I both have iphones & we share the same itunes account. He just got a iphone 4 and we are trying to transfer his music from the old phone to the new one but we are unable to do that. There is a msg that says if we choose to sync all the songs will be replaced with music from the itunes library. So does that mean he will lose all the music on his phone, replacing it with my library? Help Please!

I asked a simular question. It is confusing indeed.
https://discussions.apple.com/message/15059428#15059428
Hope it helps.
Marco

How can I have two pages in the same Oracle Drive Path?

Similar Messages

Maybe you are looking for