How can i hide a column using personalization?

Hi,
Please help me how can i hide a one column in oracle forms using personalization?
Thanks

Hi,
When you login to My Oracle Support website, enter "458786.1" or "468657.1" in the search box, and you should get the documents.
Or, use the direct links below to access those documents.
How To Do Forms Personalization (Doc ID 468657.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=468657.1
RCVRCERC: When Using Personalization to Remove a Column Receive Error FRM-41017: Cannot set UPDATE ALLOWED (Doc ID 458786.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=458786.1
Regards,
Hussein

Similar Messages

How can i hide table columns or rows in pages

I can do it in numbers, but how can i hide a column or down in pages?

Slim it down to nothing?
Peter

How can I change excel column header using Labile.

Dear Experts,
                      How can i change excel column header using LabVIEW.
Thanks for any and all help!
M.S.Sivaraj.
Sivaraj M.S
CLD

As I said in my previous post, column headers in Excel are merely row 1 cells. May be I missing something here, so please be more explicit with your question.
I guess you are using the Excel Report tools, and you want to modify an existing sheet. From my limited experience with the Excel Report tools, it is not possible to open an existing woorkbook (except as template...), so the answer to your question should be "Forget it"...
The work around is to use the example I pointed for you before, and either to write the whole new colum headers as a string array, starting in A1, or to write a single string to a given cell in row 1.
Hope this helps
Chilly Charly    (aka CC)
         E-List Master - Kudos glutton - Press the yellow button on the left...

How can I hide primary key column in BC4J form

I have populated a primary key with dbsequence and how can I hide it on the form. It is populated in the DB by a trigger.

I have populated a primary key with dbsequence and how can I hide it on the form. It is populated in the DB by a trigger. To hide it, edit the attribute using attribute-editor that you bring up by double-clicking on the attribute in the "StructurePane" .
Then go to control-hints panel and mark the attribute setting for Display = Hide.
Then UI wizards will not add the attribute into generated panels.
However once you have UI generated, this hint is no more used.

How can I sort a table using more than one column in Numbers or in Pages?

How can I sort a table using more than one column in Numbers or in Pages?

Hi Ron,
On the right side of the Toolbar click the Sort and Filter button, then select Sort.
You can then set up a multiple column sort.
Click Add A Column, Specify the sort for that column, Repeat.
Jerry

How can I hide or delete updates from the App Store I am not interested in using?

How can I hide or delete updates from the App Store I am not interested in using?

This works for apps you've acquired, but does not work for built-in features. I am regularly nagged to update Digital Camera RAW Compatibility (currently I'm being nagged about Update 6.03). I've tried the method described above - the steps are available, but they appear to have no effect. I think this is perhaps because RAW compatibility is an element of OSX rather than a separate app. I don't use RAW format with cameras, and have no need for this feature. Even if I did, I have none of the 13 camera models listed in this update.
It is just a nuisance, but if anyone knows how to suppress this I would appreciate instructions.
I would also be curious if anyone can explain why on earth Apple would incorporate RAW camera format compatibility into the core of its operating system. It shakes my confidence in their operating system design.

How can I hide figures or characts. using javascript in wad report BI NW 7

Hi,
How can I hide figures or characteristics using javascript or command in wad report ( BI NW 7).
I have read the documentation for WEB API, but it doesn't provide some info on that area.
Thank you.
Edited by: Sergey Antonov on Jul 29, 2011 3:08 PM

You can use REMOVE_DRILL_DOWN in WAD to remove characteristic..to remove a keyfigure with a button you could a variable with that button, which makes an invalid selection of the keyfigure though it is 2000, e.g. set CALYEAR = 1900.
Hope it helps,
Christian

How can I hide a field a table from SE16

Hi all,
I have an urgent requirement, can anyone help me? How can I hide or mask any field of a table from SE16. Also how can I restrict the user not to put a restriction on a particular field of a table so that this field should not be accessed for SQVI/SQ01.
Awaiting for reply.
Useful answers will be rewarded immediately with full points.
Tnx.

You could hide the column, by using the standard functinoality of the ALV output, you would need to hide the column, and save a default layout. This way the next time you come into this display, the column will not be there.
Regards,
Rich Heilman

How can i make hidden column in JTable

hi, how can i make hidden column in JTable,
basically i have a ID field in JTable, i have to use this ID , but i also dont want to show this ID in JTable.
any idea how ??

staiji its not working
i did this :
first :
TableColumnModel columnModel =
usersTable.getColumnModel();TableColumn column =
columnModel.getColumn(1);
usersTable.removeColumn(column);
then when i trying to get this :
Integer userId =
(Integer)usersTable.getValueAt(UserBrowser.this.usersTa
le.getSelectedRow(), 0);
it not give me ID column's value .
i have a column in JTable like :
ID | Username | First name | Last name
i want to hide ID column , but get this ID's value
when user clicks on JTable row.Hi, if you would read the documentation about JTable.getValueAt(...) you will find, that there is a significant difference between this method and the datamodels getValueAt(...) method. JTables getValueAt(...) method interprets column-index as index in its TableColumnModel - in your TableColumnModel there is no column any longer that holds ID values, therefore you were not able to get it by JTable.getValueAt(...). Do not use these methods for the purpose you want it for - you will also get the wrong values, if the user has repositioned columns - the column index is always interpreted as index in the currently used TableColumnModel and IS NOT A MODELINDEX.
greetings Marsian

How can I hide the events in a delegate calendar

Hi,
My boss is asking me how can we hide the event information in the delegates, in order that the delegates can see that he is busy but not to know in what he is busy?

There was earlier a thread on column level secuirty in 11g. PFB the link. See if it helps.
Column level security does not seem to work in OBIEE11g
Also, in 10g for column level security we had used choose statement. Am not sure if same can be used in 11g. PFB link for getting information on choose statement.
http://obiee101.blogspot.com/2008/09/obiee-choose-statement.html

Can Fire Action be removed using personalization?

Hi,
One of the scenarios in a custom application that we are developind is,
1. Status of item is displayed using a colored image.
2. Admin user can click on the image and edit status.
3. Noraml user can see them image but can't click and change.
We are using "Fire Action" to redirect user to edit page. (Satisfys admin requirement). We don't want to develop another page for normal users.
Can we remove Fire Action for regular users by using personalization?
Regards,
Vigni

This is the correct way of doing it, you would be having this mapping already defined in the DB for you to identify the role of a user.
I dont think you can control this at runtime using personalization in a simple way.
what you can do as a workaround is that, you can define another column/item and hide/show, either the new item (without link to navigate - For Normal user) or the existing item with the link based on the responsibility, this can be done using personalization.
Thanks
Tapash

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

How can I make a column of sums out of a repeating pattern of 24 changing numbers

How can I make a column of sums out of a repeating pattern of 24 changing numbers in Numbers.
I have a long list of 8760 numbers of which I need to take the sum (and store in a column) of each 24 numbers.

Here's one way. I've reduced the example, taking groups of five numbers from a set of 20. I've used 3 as the data number in all cases to make the sum easily recognizable.
Original column of numbers in Data::column A.
Data::B2 (and filled down): =QUOTIENT(ROW()+3,5)
This adds 3 to the row number, then divides by 5, returning the quotient and ignoring the remainder.
The result is a 'group number' for each group of five rows.
Sums of each group are reported in the Sums table.
Sums::A2 (and filled down): =ROW()-1
Sums::B2 (anf filled down): =SUMIF(Data::$B,A2,Data::$A)
For your example, assuming the 8760 numbers are listed in column A of a table named Data, starting at cell A2:
Add a second column to the table (column B).
In B2 enter the QUOTIENT formula above, with these two revisions:
=QUOTIENT(ROW()+22,24)
Fill down to all cells in the column.
Provided you have named the first table "Data", both formulas in the Sums table will be as written above. You will need to extend the Sums table to 366 rows (including the Header row) to accommodate all 365 groups of 24.
Regards,
Barry
PS: For details on the functions used, see the iWork Formulas and Functions User Guide. You can download the guide via the Help menu in Numbers '09.

How can I hide the class file ??

Hi !
I has a question, when i write a program of Java, then use the command "javac" to compiler to class file for other people using, but the class file can be disassembled and convert to source code. How can I hide the class file and let people can not disassemble, or can not see the source code. Thinks

See these....
http://www.saffeine.com/
http://www.jarsafe.com/
I recently read this. This will help you.
http://developer.java.sun.com/developer/qow/archive/160/index.jsp
Enojy....
Rajesh

How can i hide a column using personalization?

Similar Messages

Maybe you are looking for