How can i highlight an image when mouse over an image in c#?

I want to highlight an image when mouse goes there on image. The backcolor of image should change. Give a solution.

Its for button. I need to highlight image. I have attached screen shot. I want to create like that in windows form.
Hello,
Based on my understanding, it just changes the background for that image to highlight them.
So we could change the background for the control hosts these images, and in addition, the size mode should not be autosize, because we should keep some area to display the background.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

    I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
    The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

  • How can I add a latest tweet box over this image?

    Hi, I have tried to overlay a latest tweet box onto this picture however I am having no luck could you please help me?
    *** willlh.com ***
    This is the website and the tweet box is on the left below the blue twitter logo.
    Any help appreciated,
    thanks,
    WillH

    This is a design composition.  It is NOT a web page layout.  
    http://willlh.com/Website%20Design/Home%20Page%20Website%20Design.jpg
    You have much more work to do before you can use this for a web site.   Work through the following 3-part tutorial.   Although written for Fireworks, the procedure is basically the same no matter which graphics app you use.
    Taking a Fireworks comp to a CSS Layout in DW
    Part 1 - Initial Design
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
    Part 2 - Markup preparation
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
    Part 3 - Layout and CSS
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
    Incidentally, don't use spaces or special characters in folder or file names for the web.  This will create problems for you later.  If you wish, you can use underscores _ or hyphens - between words.  But no spaces.
    Nancy O.

  • When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word and Pages.  Any idea of how to resolve this annoying problem is appreciated.  System: 10.10.1

    When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word 2011 and Pages.  Any idea of how to solve this annoying problem will be much appreciated.  System 10.10.1 on a MacPro (Late 2013)

    The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
    Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
         https://www.youtube.com/watch?v=ZNQ0D84DdF4
    What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

  • How can I make signature darker when I print the report?

    I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
    I used file link and OLE, both did't make it.
    Thanks.

    No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

  • How can i highlight a text item

    hi to every body
    i am using oracle forms 6i and I have many of text item which includes numbers of different format such as 12345 ,12-3-456,1-2345-12-23
    as you know when the user doubleclick on the text item it will highlight the value .
    only for the values which is not include A '-' .
    my question is How can I highlight the values which is include '-' when A user doubleclick

    DEAR ALL,
    I have an date block and in that date block there the display items are dates in tabular forms there are many dates display when user double click on the current date or any date it show the data of that date in the next block. i want to create a (when button pressed) in my Control Block that when button press the current date color changed automatically so for that what should i wirte in when button pressed.
    Thanks for you cooperation
    Regards,
    Kamran J. Chaudhry
    Message was edited by:
    Kamran J. Chaudhry

  • How can I highlight a web address so that someone can simply click on it to go directly to the designated address?

    When composing an email, how can I highlight a web address and convert it into a link such that someone can simply click on it to go to the designated address?

    According to the help article ([[Hyperlinks in Messages Not Working]]), Thunderbird should convert the URL to a clickable link while it is sending the message. Can you confirm this by composing a message to yourself and seeing whether it works?

  • How can I remove unread messages when I know I don't have any?

    How can I remove "unread messages" when I know I do not have any?

    Hit the num lock button again. Num lock forces only the numeric keypad underlying keys to work as a  numeric keypad, and the rest of the keyboard won't work.  Unfortunately Apple stopped including the numeric keypad hidden keyboard key labels on its keyboards.  They used to include them.  They are known as mouse keys: http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_moskys.html

  • How can i reset my ipad when i have lost the code

    how can i reset my ipad when i have lost the 4 didgit/number pass code

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it

    Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please

    You have to provide your computer's administrator password in order to install Flash Player.

  • I am trying to manage family sharing and I get a warning "invalid apple ID" that accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    I am trying to manage family sharing and I get a warning "invalid apple ID"  accounts can participate in one Family at a time.  How can I add my daughter when I can't even access my account?

    Your best bet would be to try resetting the password to the account that you would like to use via iForgot
    Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
    After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

    How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
    I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
    I can't also delete.

    Hi Kazmania89,
    Welcome to the Support Communities!
    If you require additional assistance with this, click on the link below for guidance:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Once you are able to gain access to the old Apple ID, this article may be helpful:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device?

    First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
    Mac:  iTunes for Mac: How to copy purchases between computers
    PC:  iTunes for Windows: How to copy purchases between computers
    Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch. 
    Cheers,
    - Judy

  • Set up apple Id with invalid email so can't validate new account. How can I edit account  info when I can't sign in for anything? Thx

    Set up apple Id with invalid email so can't validate new account. How can I edit account  info when I can't sign in for anything? Thx

    Hi Franklin777,
    If you are having issues with your Apple ID, this article will get you started.
    Frequently asked questions about Apple ID
    The first step is to find and edit the Apple ID you created:
    Apple ID: Finding your Apple ID
    If you need to reset your security questions this article will help ... 
    The rescue email address is a different address than the one you use for your Apple ID. 
    Rescue email address and how to reset Apple ID security questions
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Hope you get back on track soon!
    - Judy

  • My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help :(

    My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help

    - If the "other" account has administrative privileges then just try changing the PW for your account.
    - Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
    Change the Admin Password with Mac OS X Single User Mode
    Reset mac mini admin password: Apple Support Communities
    - If the problem is due to a bad KB just get a new KB

Maybe you are looking for