How can I identify new new added harddisk and its device file
Hello:
I am confuse about it. It is about new harddisk map to device file issue.
Example:
I set up two harddisks by VMware SCSI 1:0 & SCSI 1:1, and I can see /dev/sdb /dev/sdc by "lvmdiskscan".
The puzzle is how can I distinguish this two new harddisk mapping device file if SCSI 1:0 & SCSI 1:1 are also 1GB of each?
Just like one which is right SCSI 1:0 map to /dev/sdb or /dev/sdc ? How can I check them using command?
Normally /dev/sda is SCSI ID 0, /dev/sdb SCSI ID 1, etc.
You can try lsscsi command, e.g.:
# lsscsi
[0:0:0:0] disk VBOX HARDDISK 1.0 /dev/sda
[0:0:1:0] disk VBOX HARDDISK 1.0 /dev/sdb
[0:0:2:0] disk VBOX HARDDISK 1.0 /dev/sdc
[0:0:3:0] disk VBOX HARDDISK 1.0 /dev/sdd
[2:0:0:0] cd/dvd VBOX CD-ROM 1.0 /dev/sr0
Similar Messages
-
HT2534 How can I open new iTunes account and split my content
I have account on iTunes I start with my email for my daughter when we got her a new iPod know I have a iPad for myself using same account want to get new one for her and let have her music off my account
You can create a new account (e.g. via this page), but you can't currently copy or transfer content from one account to another - so anything that was bought or downloaded via your account will remain tied to your account
-
How can I bulk sort by capture time and bulk rename files off multiple cameras?
I have found many renaming utilities, including bridge, but I have not run across any that allows bulk / batch capture time sort and rename?
I can sort by capture time in Lightroom 3, but when I export it puts the files back in original order....maybe I am doing something wrong....that would not surprise me.
I just tried sorting by Capture Time in LR3 and then exporting and renaming.... renamed but not in the capture time sort order....
so I am open to any suggestions... I shoot 2 cameras 99% of the time so I do not need to change lenses.
Thanx in advance.How can I bulk rename music files in reverse order from artist - song name to songname - artist.
I actually dont need to rename the actual files.
Its just i have a huge txt list of 100,000 music names that are listed as so.
I wonder if we haven't misunderstood what you were asking for. Could it be that you have not a huge file, but just a huge list of names in many small files. If that's the case, you should rather use the following script instead of the previous one.
Since this script does not rename the files, make a backup of your files before running it.
set theFolder to choose folder -- the folder containing your text files
tell application "Finder"
set theNames to name of files of theFolder whose name extension is "txt"
end tell
set theTextFiles to {}
set theFolderPath to POSIX path of theFolder
repeat with thisName in theNames
copy theFolderPath & thisName to the end of theTextFiles
end repeat
repeat with thisFile in theTextFiles
set F1 to open for access thisFile
set theText to read F1
close access F1
set theParagraphs to paragraphs of theText
set bigList to (a reference to theParagraphs)
set theNewParagraphs to {}
set bigNewList to (a reference to theNewParagraphs)
repeat with X in bigList
set P to offset of " - " in X
if P = 0 then
set Y to X
else
set Y to text (P + 3) through -1 of X & " - " & text 1 through (P - 1) of X
end if
copy Y & return to the end of bigNewList
end repeat
set theNewText to text 1 through -2 of (bigNewList as text)
set F2 to open for access thisFile with write permission
set eof F2 to 0
write theNewText to F2
close access F2
end repeat
display dialog "Done!" buttons {"OK"} default button 1 with icon 1
Message was edited by: Pierre L. -
Heloo how can i register new nokia asher and delet...
i need help i need to register my nokia asher201on my nokia account i have my old nokia C2 and i cant download yahoo messenger please can someone help
Hi Taylor3d,
In order to add a domain to your site, please refer to the following document for instructions: http://helpx.adobe.com/business-catalyst/partner/going-live-guide.html. To summarize, once the site is live, simply add your domain to your site via the admin console > Site Settings > Site Domains > New Domain. At your registrar where you purchased the domain, you will need to update the nameservers to the ones listed in the article I've just provided.
In regards to using Business Catalyst for hosting email, you will need to upgrade to the webBasics+ plan. To do this, within the admin console navigate to Site Settings > Site Management, and the ability to upgrade will be present. Once your site has been upgraded to this plan, you will be able to add email accounts via Site Settings > Email Accounts. -
How can I see a list of apps and the devices they are installed on?
I have iTunes 11, and have downloaded numerous apps.
I have 2 iPads and 2 iPhones. I know I can select each mobile device in turn and see whether an app is installed on it or not. But, to see if a particular app is installed on each device, I have to click on each device and then look at the app list.
I would rather be able to see a list of apps, and along side them, a column for each device with an indicator of whether or not the app is installed, and a button, such as is used in the app list today, which would allow me to Remove, Install, Update, etc.
In this way, I would easily be able to see everywhere an app was installed, and in one place be able to, for example, indicate I wanted it removed from all devices, and potentially deleted from iTunes when that is done.
Is there a facility built in to iTunes already that will allow me to do this? If not, is there a Plug-In I could use?That sucks! Thanks for the quick response.
Do you know if there is another Adobe app (free or paid) that will let me markup a large document and list my edits? -
How can I track my e-book sales and its downloads at the ibookstore?
Please tell me how to do it.... Thanks in advance...
Welcome to Apple Communities
Access to your sales http://itunesconnect.apple.com -
i just the ipad2 for my daughter she forgot her password we retryed too many times that its completey disabled, its saying to go to itunes., then what?? i need help Please
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
In Credit Management how can we identify the credit customers
Hi SD Gurus,
Could you please tell me, In Credit Management how can we identify the credit customers?
and what are accounting entries?
Thanks & Regards,
NivasYou can refer Table KNKK with reference to Credit Control Area, you will get all the Customers maintained for Credit Management.
There is no such Accounting Entries especially for Credit Management.It would be the same as comes while creating Invoice.
Best Regards,
Ankur -
How to define the size of report area and its elements?
How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
Is there any way to change the measuring units?
Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
Thanks.Hi Juliano,
I hope this is what you had in mind...
1. File / Page setup: set your paper size, portrait/landscape and margins.
2. Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
3. Measuring units: is this for the ruler? This is pulled from your computer settings.
The rest I'm not sure about but I hope this is enough to get you started!
Heather -
i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
johnCheck the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2 -
how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?
Email them? Use DropBox? What type of files?
-
My contacts have been transferred from my iPhone5 to iPhone6 . I now need to back them up in a new PC in a separate address book How can I do it without adding all contacts from Outlook when I synch back from iTunes ?
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
How can i add new jcomponent to a frame?
hi.
how can we add new component to a frame? look at this code. Why when i click on button, nothing added to frame? event handled correctly and frame size changes but no button adds to frame.
private void convertButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
JButton newButton = new JButton("new");
getContentPane().add(newButton , BorderLayout.CENTER);
newButton.setVisible(true);
setSize(500, 500);
}Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
Well typically you wouldn't add a button to the Center of a BorderLayout. If you really want to do this you should be using a [Card Layout|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html].
In general the code for adding/removing components should be:
panel.add(...)
panel.revalidate();
panel.repaint(); -
How can I Add new LookAndFel to IDE
How can I Add new LookAndFel to IDE "JDeveloper 10g" ?
(to the combo box in the Tool->Preferences->LookAndFeel ).Here is how you can add new L&Fs to the drop down list. (Instructions are for Linux , as I use Linux, but they will work for Windows too)
Add the L&F jar to <path to JRE>/lib/ext (or <path to JDK>/jre/lib/ext). Then create swing.properties (if it does not already exist) in <path to JRE>/lib (or in jdk...) with following lines:
swing.installedlafs = motif,windows,metal,mac,plastic
swing.installedlaf.motif.name = CDE/Motif
swing.installedlaf.motif.class = com.sun.java.swing.plaf.motif.MotifLookAndFeel
swing.installedlaf.windows.name = Windows
swing.installedlaf.windows.class = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
swing.installedlaf.metal.name = Metal
swing.installedlaf.metal.class = javax.swing.plaf.metal.MetalLookAndFeel
swing.installedlaf.mac.name = Mac
swing.installedlaf.mac.class = com.sun.java.swing.plaf.mac.MacLookAndFeel
swing.installedlaf.plastic.name = Plastic
swing.installedlaf.plastic.class = com.jgoodies.plaf.plastic.PlasticLookAndFeel
swing.defaultlaf=com.jgoodies.plaf.plastic.PlasticLookAndFeel
Note that I retained default example L&Fs that normally come with the JDK/JRE (depending on the platfom) and added PlasticLookAndFeel as additional PLAF (Pluggable Look And Feel).
Now it should be possible to choose Plastic L&F in not only JDeveloper but also other Swing apps that you want to use.
Please let me know if this works and also if you have any questions.
- Ganesh -
I loaded music on my nano with my old laptop. now using a new laptop and want to load music on my nano but it wants to delete all song. How can I load new music frmo new laptop onto my nano and keep existing songs?
Import the music on the external HD into iTunes. If you don't want iTunes to make a new copy of each track that is stored in your iTunes Media folder on your PC's internal HD, make sure the Copy files to iTunes Media folder when adding to library option is NOT ticked from under the Advanced tab of iTunes Preferences. Just remember that if you go this route, you'll always need to have your external HD plugged in before you start up iTunes.
B-rock
Maybe you are looking for
-
In brief, when I drag content from iTunes to my iPad icon it will not transfer. It doesn't happen to all albums and songs but quite a few. I also have an iPod touch 5th gen iOS 8.2 and the same albums seem to move across ok? Most pf the time it say's
-
Getting error while Archiving the IDOCS
Hello, i am using the archiving object IDOC. I am getting an error "Infostructure SAP_IDOC_001 contains error. When running the production Mode. I tried to run the same in Test mode there was no error. The error is occurring in the delete program. I
-
I am having difficulty viewing large fine J-peg files (Nikon D100) in Lightroom. I can see the images on my camera but I do not see the images after I have imported the images from my card reader. What is the best way to trouble shoot this? I shot
-
Showing button over skins?
I'm stumped on this one. I know there has got to be a way to do this, but I'm new at AS3, and I can't figure it out. I'm creating a 508-compliant control bar for flvplayback files, and am using the standard video playback components (stop, play, mute
-
Hi all, i try to call a remote enabled function module via rfc from erp to apo. CALL FUNCTION 'Z_XXXXXXXXXXXX DESTINATION XXXXX EXPORTING wa_truid = it_tab_pre-trguid IMPORTING status = wa_status. In debu