How can I implement ads to my android flash game?

I am having trouble on implementing ads to my android flash game. I have searched Google Adsense, but their code does not involve mobile phones. I looked up admob, but you have to add your game on the Play store first. I am relatively new at actionscript, so could you please help me with this in simple terms?

it's not going to be simple unless you make your own ads.
if you do not make your own, you must use someone else's ads.  if you use someone else's ads, you must use their api to include their ads to your game.

Similar Messages

  • How can I implement GCM push notifications in AIR?

    How can I implement GCM push notifications in AIR? How can I implement GCM in Android using flex?

    You have 2 ways, first is buy the ane, are alot such as: http://myappsnippet.com/gcm/ or review the open in: https://github.com/freshplanet/ANE-Push-Notification or http://afterisk.wordpress.com/2012/09/22/the-only-free-and-fully-functional-android-gcm-na tive-extension-for-adobe-air/ , that for client side, for server side you can buy in http://urbanairship.com/ or enter in the world of build your own pisblisher server, in this case you need to read android and ios and blackberry notification, each one has different methods.
    Also, here you have more information: http://forums.adobe.com/message/4626292
    looks good.

  • How can I transfer photos from an android based phone to my iPad without going thru my PC?

    How can I transfer pictures from my android based phone to my iPad without going through my PC?

    I like to get my media shared in the cloud so its reachable across all my devices.
    Dropbox, Box and Google Drive will be your friend.

  • I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks

    I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
    p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device

    mickyja wrote:
    I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
    p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
    Micky,
    The iTunes Store sells songs in AAC format.  Most Android phones can play AACs.  Just sync them to your phone per the instructions with the phone.
    If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide: 
    iTunes: How to convert a song to a different file format - Apple Support
    (This conversion does not require burning.)
    For future reference, note that the iTunes Store is really optimized for people using Apple devices.  You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music.

  • How can I implement a comfirmation window when closing javafx application?

    hi,guys
    I'd like to add a confirmation window when user is closing my javafx application,if user click yes, I will close the application,if no ,I wouldn't close it ,how can I implement this function?
    primaryStage.setOnCloseRequest(new EventHandler<WindowEvent>(){
                   @Override
                   public void handle(WindowEvent arg0) {
                        try
                             //todo
                        catch(Exception ex)
                             System.out.print(ex.getMessage()+"\r\n");
            });

    Hi. Here is an example:
    import javafx.event.ActionEvent;
    import javafx.event.EventHandler;
    import javafx.geometry.Pos;
    import javafx.stage.*;
    import javafx.scene.*;
    import javafx.scene.paint.Color;
    import javafx.scene.layout.*;
    import javafx.scene.control.*;
    public class ModalDialog {
        public ModalDialog(final Stage stg) {
         final Stage stage = new Stage();          
            //Initialize the Stage with type of modal
            stage.initModality(Modality.APPLICATION_MODAL);
            //Set the owner of the Stage
            stage.initOwner(stg);
            Group group =  new Group();
            HBox hb = new HBox();
             hb.setSpacing(20);
            hb.setAlignment(Pos.CENTER);
            Label label = new Label("You are about to close \n your application: ");
            Button no  = new Button("No");
            no.setOnAction(new EventHandler<ActionEvent>() {
                public void handle(ActionEvent event) {
                       stage.hide();
            Button yes  = new Button("Yes");
            yes.setOnAction(new EventHandler<ActionEvent>() {
                public void handle(ActionEvent event) {
                       stg.close();
             hb.getChildren().addAll(yes, no);
             VBox vb =  new VBox();
             vb.setSpacing(20);
             vb.setAlignment(Pos.CENTER);
             vb.getChildren().addAll(label,hb);
            stage.setTitle("Closing ...");
            stage.setScene(new Scene( vb, 260, 110, Color.LIGHTCYAN));       
            stage.show();
    }Test:
       import javafx.application.Application;
    import javafx.event.ActionEvent;
    import javafx.event.EventHandler;
    import javafx.scene.Group;
    import javafx.scene.Scene;
    import javafx.scene.control.Button;
    import javafx.scene.paint.Color;
    import javafx.stage.Stage;
    import javafx.stage.*;
    * @author Shakir
    public class ModalTest extends Application {
         * @param args the command line arguments
        public static void main(String[] args) {
            Application.launch(ModalTest.class, args);
        @Override
        public void start(final Stage primaryStage) {
            primaryStage.setTitle("Hello World");
            Group root = new Group();
            Scene scene = new Scene(root, 300, 250, Color.LIGHTGREEN);
           primaryStage.setOnCloseRequest(new EventHandler<WindowEvent>(){
                   @Override
                   public void handle(WindowEvent arg0) {
                                    arg0.consume();
                        try
                         ModalDialog md = new ModalDialog(primaryStage);
                        catch(Exception ex)
                             System.out.print(ex.getMessage()+"\r\n");
            primaryStage.setScene(scene);
            primaryStage.show();
    }

  • How can I implement a real time datawarehouse

    Hi, I'm a little lost here but I want to know how can I implement a real time datawarehouse in sql server, I don't know if it is only to make the extraction process the shortest time possible.
    Thank you

    Hi Mega15, 
    I agree with everything Seif and Louw said, but I'd like to add that if you are using SQL Server 2012 or 2014 and you want to use DirectQuery or ROLAP mode (depending on what SSAS mode are you using, tabular or multidimensional) you may be interested on
    using columnar indexes on your base tables. 
    Analytical and aggregated queries will take GREAT advantage from these indexes, they will perform much better than with traditional B-Tree indexes in most of your scenarios. 
    Regards. 
    Pau.

  • How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO?

    How can I implement a Digital I/O counter with a maximum source frequency of 80 MHz (like 6602 board) using CompactRIO? It appears as if the Digital I/O modules for CompactRIO are much slower than this.
    Thank you,
    --Ray

    Hi Ray,
    The highest frequency input we offer for C Series modules is 20 MHz if you are doing LVTTL and 10 MHz for 5 V TTL.  These modules are the 9402 and 9401, respectively.  Unfortunately, there is no 80 MHz input on this form-factor.
    Regards,
    Chris E.
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • How can I implement an user function in a derived column of a report ?

    Hello,
    I've a report and added a derived column.
    In this column should be displayed the result of a function.
    GETANZGJMONATE ( to_date(#START_AFA#,'DD.MM.YYYY'), #ND#, :P302_GJ );
    How can I implement this?
    Thanks in advance
    Regards Ulrike

    Ulrike - I would do this in the SQL statement (there may be other ways).
    Presumably START_AFA and ND are table columns?
    Presumably you've also created the GETANZGJMONATE function?
    So, something like this should work (this also assumes that START_AFA is of a DATE type - you'll need the TO_DATE call if not):
    SELECT COL1
    , COL2
    , START_AFA
    , ND
    , GETANZGJMONATE (START_AFA, ND, :P302_GJ)
    from TABLE
    where ...
    Can't remember if you have to grant any particular execute permissions on the function ('grant execute on GETANZGJMONATE to public', for example) when you call it from SQL on a page, but you could try that if the function call fails.
    Depending on what's in :P302_GJ and what the function parameter data type is, you might need to use the '&P302_GJ.' syntax or TO_NUMBER etc.
    Hope this helps.
    Regards,
    John.

  • How can i implement 'Distribute Qty' function in BAPI_GOODSMVT_CREATE

    Hi all,
    Using MIGO For GR. if more than one Batch or Production Date or Vendor Batch for same Purchase Order Line Item and Deliv date, need to hit ‘Distribute Qty’ button to split the entry line into multiple lines before enter Production Date and Vendor Batch.
    So I want use bapi BAPI_GOODSMVT_CREATE  implement MIGO function for a interface. Anyone have some suggestion how can i implement the 'Distribute Qty' function in the bapi.
    My email address: [email protected]

    Hello,
    1. Use structure BAPIPAREX for passing custom fields. (There are several blogs/posts on how to make use of this).
    2. In the BAPI i noticed there is a BAdI to populate these fields into your business tables.
    Call BAdI MB_BAPI_GOODSMVT_CREATE to fill own fields
        TRY.
            get badi lo_mb_bapi_GOODSMVT_CREATE.
          CATCH cx_badi_not_implemented.                    "#EC NO_HANDLER
        ENDTRY.
        TRY.
            call badi lo_mb_bapi_goodsmvt_create->extensionin_to_matdoc
              EXPORTING
                EXTENSION_IN = EXTENSIONIN[]
              CHANGING
                CS_IMKPF     = S_IMKPF
                CT_IMSEG     = T_IMSEG[]
                CT_RETURN    = return.
          CATCH cx_badi_initial_reference.                  "#EC NO_HANDLER
        ENDTRY.

  • How can we implement the currency translation in a query definition

    How can we implement the currency translation in a query definition and should it modified for each and every type of currencies

    hi rama krishna
    i think u can not get any translation in Query. this is only for het the report as it is there in tables. if u want to write a report take a help of the Abaper
    hope u goit,assign points if u ok for this
    thanks
    subbu

  • We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

    We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

    Anyone any ideas to help please?

  • How can I implement the connection pool in my java stored procedure

    my java stored procedures (in database 'B') have to connect to another oracle database ,let's say 'A'. And how can I implement the behavior like the so-called connection pool in my java stored procedure in 'B', as below.
    1. database B, has 2 java stored procedures sp1 and sp2
    2. both sp1 and sp2 connects to databse 'A'
    whatever I call the sp1 and sp2 and the database 'A' always only one connected session from sp1 and sp2 in database 'B'.
    THANKS A LOTS...

    my problem is I have a lots of java stored procedures need to cnnect to the remote oracle db, and I hope the remote db can only have a connected session from my java stored procedures in my local db. I try as below
    class sp{
    static Connection conn=null; //the remote db connection,
    public static void sp1(){...}//procedure 1, using conn
    public static void sp2(){...}//procedure 2, using conn,too
    I can 'see' the 'conn' variable if I invoke the sp1() and sp2() from the same client application(maybe sqlplus). But if I invoke the sp1() from client 'A' and invoke sp2() from client 'B' then the sp1() and sp2() can not see the 'conn' variable for each other. I think it's because the two clients cause oracle to create two instances of the class 'sp' and the sp1() and sp2() located in different instance seperately. Thus the sp1() and sp2() can not see 'conn' for each other. They can only see its own 'conn'.
    To connect to the remote db from the java stored procedure is easy but is it possible to connect to the remote db via database link from the java stored procedure at my local db ? If so, then I also archive my goal .
    BTW , thanks a lots...
    andrew :-)

  • How can we implement product key feature while installing AIR application?

    How can we implement product key feature while installing AIR application?

    Hello,
    Could you try using /Q or /QS parameter?
    http://msdn.microsoft.com/en-us/library/ms144259(v=sql.110).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How can I implement IMAQ correlation for 16bit image?

    Hi
    When using IMAQ correlate. vi in Machine vision Filter catergory, the vi only works for 8 bit source and template image case.
    16 bit source image case makes error.
    But I need 16 bit source image without losing image information, I want to use full 16 bit image correlation with 8 bit template.
    How can I implement the code in labview?
    Need help.
    Many thanks.

    Unfortunately you can't do so.
    There are some functions in the Vision Lib that only accept 8bit images. In order to use them you have to convert your image to an 8bit Image.
    Keep in mind that converting an Image to 8bit will not necessary result in a loss of data. Check your Images, it might be that you are not using the full range of a 16bit value. you might be able to use a mixture of dynamic shifting and bit shifting in order to convert an image to an 8 bit, then embedding these criterias in the image and use them to convert back to a 16bit at a later time without losing any data, or in most cases minimal precision loss. 
    If you would like to attach one of the images you are using, I can take a look at it to see if this is possible in your case.
    Good luck,
    Dan,
    www.movimed.com - Custom Imaging Solutions

  • How can I implement Authentication in LDAP

    How can I implement Authentication in LDAP.

    Hi,
    If ur using JAAS, then use NTLoginModule in ur conf file and your own defined CallbackHandler for validating and obtaining the Subject (user connected to your domain).
    Remember the user is the one which the code obtains when u login to your Domain based machine.
    Apart from this, Apache Http Server also provides you with a popup window asking for the user's credentials when u set the SSPIDomain in the httpd.conf file.
    httpd.conf
    ========
    <Location /Seet/servlet/ >
    SSPIAuth On
    AllowOverride None
    Order allow,deny
    Allow from all
    AuthName "seet190 auth"
    AuthType SSPI
    SSPIAuth On
    SSPIAuthoritative On
    require valid-user
    SSPIDomain seet190
    </Location>
    seet190 is the domain name
    Actually so far in the Security Forum, u might refer to some of the replies posted for more help but actual LDAP authentication can be done by passing the user's info too.
    HTH,
    Seetesh

Maybe you are looking for