How can I import and listen to a .wav file on my shuffle?

Someone texted me a WAV audio file.  I was able to import into my iTunes library, but cannot listen to it on a shuffle. It appears in the shuffle's library, but does not play.  Do I need to convert it to a different format?

According to this Apple support document, WAV files are supported by the iPod Shuffle.
iPod shuffle: Compatible audio formats
What happens when you try to play it on the iPod Shuffle? Were you even able to successfully sync or add the WAV file to the Shuffle via iTunes?
Perhaps, it wouldn't hurt to try and convert it to another format anyways.
iTunes: How to convert a song to a different file format
B-rock

Similar Messages

  • How can I open and listen to the PDF documents with audio in my iPad?

    How can I open and listen to the PDF documents with audio in my iPad?

    You need to use a PDF reader that supports multimedia. Adobe Reader 10.3 does not. Adobe has not stated whether it will support multimedia in the future.
    In the meantime, you could buy an application that does like PDF Expert. Read about it here:
    Finding the Best Tablet PDF Reader

  • HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
    to disable this, you must use a command under terminal.
    to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
    once under terminal, type the following text exactly:
    sudo tmutil disablelocal
    hit enter.
    you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
    in a few minutes the space taken up by time machine should be cleared.

  • Looking for a program that can handel import and export of palm doc files

    I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
    Could anyone give me a few suggestions of any plug-ins that would be good me?
    Hearns
    Post relates to: Palm IIIxe
    This question was solved.
    View Solution.

    Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
    Here are the clean uninstall instructioins for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

  • How can I convert an array into a .wav file?

    I have an array of points that I need converted and written into a .wav file. Any help?

    Indeed there is!
    Look at the attached vi....that's about all there is to it!
    Good Luck..
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705
    Attachments:
    ARRAY_TO_WAVE.vi ‏17 KB

  • How can i import and order photo books from older iPhoto versions?

    I have made a photobook which i have not ordered at apple yet. It's on another macbook still running iphoto 07 (unable to update iphoto, because to old for Mavericks)... Somehow i can't import this album on my laptop running iphoto 9.5.1 and order it from here...
    Does anyone have solution?

    Read again - the word "import" does not appear in either answeer - you never ever import one iPhoto library into another one
    books do not actually exist - they are simply database entries - so you have to move the entire iphoto library
    1 - rename it on the source machine
    2 - Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formatted Mac OS extended (journaled)
    3 -  drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac
    4 - depress the opeion key and launch iPhoto on the new mac
    5 -  select the library with the book, convert it as needed and you will be ready move forward
    - be sure to
    Before ordering your book preview it using this method -http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    there may be differences in the book due to a new system
    Spacing added for clearity in reading
    LN

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • How can I Save and Load the Configurat​ion File of a VNA HP8510C with LabView

    Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
    Has someone already deal with such a question?
    Géraud DEVOS
    IWE Karlsruhe

    geraudIWE a écrit:
    Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
    Has someone already deal with such a question?
    Géraud DEVOS
    IWE Karlsruhe
    Hello GerauIWE,
    Have you try to use the Hewlett-Packard 8510C Instrument Driver?
    You can download it on :
    http://sine.ni.com/apps/we/niid_web_display.drv_re​sults?p_app_area=&p_man=hewlettPackard&p_keywords=​8510c&p_inst_type=&p_env=845&p_drv_type=&p_int=
    Best Regards,
    Sanaa T
    National Instruments France
    Sanaa T.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

  • How can I charge and listen at the same time?

    I'm using a windows PC and the USB connector. If I plug the cable in, iTunes automatically opens and I get the "do not disconnect" message and can't play music.
    If I eject my iPod from iTunes, it doesn't charge anymore.

    You can listen to the music on your iPod through iTunes. Just click on the nano icon where the library and store and playlists are and hit play at the top. If you want to listen to it while charging, you can do that by using a wall adapter to charge. I do this at work when my battery starts to get low.

  • How can I import and edit Divx/Xvid codec .avi files?

    Recently I changed of computer, I had Premiere CS3 in Windows and now I have CS4 in Mac. The problem is that in windows I could edit divx and xvid files, but now, when I try to import any divx/xvid file premiere has an error saying "UNSOPPORTED  COMPRESSION IN FILE".
    I have installed divx and xvid codecs on the Mac and I can watch those videos too, but Premiere doesn't accept them.
    Any idea? Thanks

    Mike,
    You might want to take a look at the file closely, and then decide if you wish to edit it. Know, that if you go to DVD, or any compressed format/CODEC, after the edit, there will be another quality hit.
    There are CODEC's that are basically used to play a file, and then those that play, plus allow editing. DivX and Xvid, are in the former group. There could be some editors that will edit DivX, but I do not know of them. PrPro cannot effectively use the DivX CODEC to edit. Some have gotten very lucky, once the CODEC is installed, but usually one looses either the Video, or the Audio. In the cases, where it worked, OOS issues were almost always present.
    Good luck,
    Hunt

  • How can I import and edit my iWeb (2006 version) with newly updated iWeb 2011?

    Hi:
    I was using the iWeb from iLife 2006, until I just updated to iLife 2011. I tried copying and pasting my site into "sites", but when I opened iWeb for the first time; it appeared I coud not open that file. I looks like I may have to rebuild it from scratch, which would be enormously time consuming and difficult. Any ideas? Thanks for your help.

    Well no, iWeb will not be able to open that file because it is your published site and iWeb has no import facility, so is unable to open any html files/published files.
    iWeb always has and still does store all your website information in a file called domain.sites which can be found under your User/Library/Application Support/iWeb/domain.sites.  Remember to look in your User/Library and not your System Library, as iWeb is not there.
    Find this domain.sites file and ensure that it is in the same place - put the file in your User/Library/Application Support/iWeb folder and then just double click on your domain.sites file and iWeb 09 should open it.
    Find this file and you won't have to re-build yoru site from scratch.  Remember that it is this file that you need to back up, as iWeb has no import facility.

  • How can I import and edit photos on my laptop and synch with PS Elements?

    I have my Photoshop elements library on my desktop. Can Lightroom help with this, or do I need to update to Creative Cloud with Photoshop?

    If you have Elements only, your best choice would be to store your image library as well as your catalog on an external drive and plug the EHD alternatively to both computers. Be sure the EHD is recognized with the same drive letter on both computers. Ask if you need help for that solution.
    Lightroom offers other powerful solutions, you don't need the Cloud version with Photoshop.
    To get the best advice from Lightroom experts, post on the Lightroom forum:
    Photoshop Lightroom

  • How can Last Imported and All Imported be deleted from my iPad?

    Attempts to delete those two "albums" fail because they go gray (in a manner of speaking) when Edit is tapped.
    Also, when attempting delete, either an individual image or a group of images, I get the warning that to tap on delete will delete that image in other albums. Does that apply only to the images on the iPad? And if so, does syncing from iTunes back to the iPad restore that/those specific image(s) in their proper albums?
    An ancillary question has also reared its head. Even though Places and Faces are unchecked in iTunes, many of them appear on the iPad. Why?
    This series is prompted by the desire to free up space on a decidedly almost-full iPad!

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How can I import an iMovieHD (5.0.2) file into 10.0.3?

    Have an edited iMovieHD (5.0.2) on my PowerePC G4, OS X 10.4.11, that I'd like to migrate/import to iMovie 10.0.3 (Mavericks OS X 10.9.2); can this be done, and if so, how?

    Hi gene in ohio!
    You should use Migration Assistant to help you get the iMovie file onto your new computer:
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    http://support.apple.com/kb/ht4889
    After that is completed and the file is on your new computer, you can use the information in this article to help you upgrade the file for use with iMovie (2013):
    iMovie (2013): Updating projects and events from previous versions of iMovie
    http://support.apple.com/kb/HT6012
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • How can I read and display a ATR image file?

    Hello,
       Does anyone have any ideas on how to read a atr image file? 
    Regards,
    Kaspar
    Regards,
    Kaspar

    Hello,
      The ATR file is one of three files that are outputed as a result of a test that is performed with UnHoltz Dickie test equipment  that is used in a vibration lab. Does this help answer the question is there are any viewers?
    Regards,
    Kaspar
    Regards,
    Kaspar

Maybe you are looking for