How can I import CD's with differing custom settings? IWhen I want to change settings the AAC encoder window does not appear because Itunes has adopted the first custom settings as default.
I imported a CD with custom settings for stereo bit rate, sample rate and channels. When I tried to import a second CD with different settings I could not get to the AAc encoder window that gave the settings options. The custom settings I had chosen for the first CD had become the default "custom" settings.
Hi there,
please take a look at my suggestion under message #19227279
regards,
Markus
Similar Messages
-
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanksHi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David -
How can I add donate page with different levels of giving such as $250, $150, $50, Other
How can I add donate page with different levels of giving such as $250, $150, $50, Other. I am using Foxy Cart…is this possible?
From Muse end , you can add texts as donation value with paypal button which would take the users to paypal site for payment, with Foxy Cart you can try the suggestion mentioned here :
https://forum.foxycart.com/discussion/4417/donation-page-radio-button/p1
Thanks,
Sanjit -
How can i import my e-mail contacts? i don´t want to type one at a time. Is there a way to import all at once?
Sync your old address book with the one on the iPod. You may have to import them into an intermediate address book like Google contacts since that can be done by importing a file you should be able to export for your address book. Without know your old address book that is all I can say.
-
I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?
From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone. -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?
i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com -
I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.
Hi there,
If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W. -
My brand new iPad 2 does not appear in iTunes. I am OS 10.6, iTunes is up to date, I have restarted computer and iPad and switched usb sockets. Don't know if its related, but I can no longer see my Sony Handycam in iMovies too.
What content are you wanting to copy of the iPad ? You should be able to copy off anything that you've purchased from Apple (films, music, ibooks, apps etc) by connecting the iPad to your computer's iTunes and doing File > Transfer Purchases. If you want to copy off music copied from your own CDs or purchased from other sites then you will need to find a program for your computer that can copy them off – iTunes won't copy them off.
For photos taken with the iPad, copied to it via the camera connection kit or saved from emails/websites then you should be able to copy them off via the Windows camera wizard.
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
Content in third-party apps (documents and files etc) then how you copy that content off will depend upon what the apps that they are in support e.g.either via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc. -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
I have a student trying to set up an App Store account (she has an Apple ID), however she is being asked for credit card information. The option of NONE does not appear as one of the choices with the other credit cards.
Any assistance?There are instrctions on this page for how to create a new account (it won't work with existing account) without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it.
-
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
I had to replace my iPhone today. I have alot of music that still resides on my iPad. It does not appear in iTunes. How to I get this music to my iPhone?
From the iPad to itunes...
Transfer Purchases
File > Devices > Transfer Purchases
More Info Here > http://support.apple.com/kb/HT1848
From iTunes to iPhone...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
Maybe you are looking for
-
I have downloaded a movie using i Tunes is it possible to burn it onto a DVD? and if so - can someone twll me how to pleASE? THANKS
-
Need build.xml to create Ear file using Ant in jdeveloper 11g??
Hi all, I think Jdeveloper use ANT to create Ear file and how to get build.xml from Jdeveloper. 1) I have created ADF Fusion web Application having separte Model and View Controller. 2) Now when I select View Controller project and then i create New
-
Can you select a scene using time code?
When you are selecting a scene from a larger clip can you designate in an out points using the time code?
-
Copying Library data between PCs?
I currently have my Library in iTunes 9.2 on my Vista box. I'm planning on backing up my songs, replacing the HDD and starting fresh with Windows 7. I can always just reimport all of my songs into iTunes 10 on the new one, but is it possible to impor
-
Weird Icon (browser related ?)
NOW SOLVED - found another post - it was a push message which I deleted via View Folders in messages Between the Profile indicator and the date / time, I have an icon that has the number 1 and what looks like the browser Icon. It's some sort of stat