How can I import CTI route points with line setting "Advertise Globally via ILS" enabled?

I am using CUCM 10.5.1.10000-7 and am using ILS to propogate dial plans between two clusters.  We use quite a few CTI route points but so I generally import them into the cluster with all the appropriate settings and line association settings. I need to be able to enable and set the various ILS settings line Advertise Globally via ILS.  This can be done on phones and their line associations but not on CTI route points as far as I can figure.  The same goes true with the Bulk Administration, you can updates lines of the phones for these setting but not CTI route points.  Any trick or even obvious thing I  am missing?  Setting these manually is extremely time consuming.  

I am using CUCM 10.5.1.10000-7 and am using ILS to propogate dial plans between two clusters.  We use quite a few CTI route points but so I generally import them into the cluster with all the appropriate settings and line association settings. I need to be able to enable and set the various ILS settings line Advertise Globally via ILS.  This can be done on phones and their line associations but not on CTI route points as far as I can figure.  The same goes true with the Bulk Administration, you can updates lines of the phones for these setting but not CTI route points.  Any trick or even obvious thing I  am missing?  Setting these manually is extremely time consuming.  

Similar Messages

  • How can I find the vanishing point with Labview?

    I am using a myRIO for developing a system for helping visually imapaired people in their navigation. I have already done the image processing of what is being aquired by the camera (edge detection and finding of straight lines).
    How can I fin the vanishing point from the two edges of a path in an image with LabVIEW? Is there any special function that I can use?
    Thank you!
    Solved!
    Go to Solution.

    The vanishing point is the intersect of two lines, right? 
    https://www.google.com/webhp?sourceid=chrome-insta​nt&ion=1&espv=2&ie=UTF-8#q=intersect%20point%20of%​...
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • How can I import images from iphoto with the albums and folders?

    How can I import images from iphoto without losing the albums and folders I already created?

    In Organizer, you can choose File>get Photos and Videos>From iPhoto.
    Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
    Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
    Hope this information helps!
    regards,
    vaishali

  • How can an external table handle data with line feed between delimiters?

    I have defined an external table as below. My data is pipe delimited and comes from a DOS system.
    I already remove any carriage returns before putting the file into the DATA_DIR for reading. But
    I have found that some of my VARCHAR fields have embeded line feeds.
    Is it possible to have a definition that would remove any line feed characters between the delimiters?
    Below I also threw together a sample data set there ID #2 has that extra character. Yes, I could
    write an awk script to pre-process all my data files. But I am hoping there is a way for Oracle
    to also do this.
    I understand the LDTRIM to remove any leading and trailing spaces in the delimited field. Is there a
    REPLACE or TRANSLATE option. I did a bit of searching but I must be asking the wrong things.
    Thanks for any help
    Eric
    CREATE TABLE table_ext
      id        NUMBER,
      desc1     VARCHAR2(64 CHAR),
      desc2     VARCHAR2(255 CHAR),
      add_date  DATE
    ORGANIZATION EXTERNAL
      TYPE ORACLE_LOADER
      DEFAULT DIRECTORY data_dir
      ACCESS PARAMETERS
        RECORDS DELIMITED BY NEWLINE
        CHARACTERSET WE8ISO8859P1
        BADFILE     log_dir:'table_ext.bad'
        DISCARDFILE log_dir:'table_ext.dis'
        LOGFILE     log_dir:'table_ext.log'
        FIELDS TERMINATED BY '|' LDRTRIM
        MISSING FIELD VALUES ARE NULL
        id        INTEGER EXTERNAL(38),
        desc1     CHAR(64),
        desc2     CHAR(255),
        add_date  CHAR DATE_FORMAT DATE MASK "yyyy-mm-dd hh24:mi",
      LOCATION( 'data.txt' )
    PARALLEL
    REJECT LIMIT UNLIMITED;
    1|short desc|long desc|2001-01-01 00:00
    2|short desc| long
    desc |1999-03-03 23:23
    3|short desc|  long  desc  | 2011-02-02 02:02

    Thanks for looking. But that relates to the record delimiter which in my case is the pipe character '|'. In my various data sets this is consistent. I expect each record to be one per line. But between two delimiters some data has a line feed. So I'm looking for a method that will "cleanup" the field data as it gets imported.
    I was hoping there was an option that would ignore any embedded line feeds (\n) characters. I.e., those not at the end of the line.
    Eric

  • Location with CTI Route Point

    Hi
    Does anybody knows whether Location setting will work with CTI Route Point?
    Is there a documentation? I can't seem to get it to limit amount of calls to route point.

    I belive this is due to the fact that the call does not get connected to CTI RP for very long time, it is re-directed to a cti port whatever cti application is used, ie IPCC, etc. So you should be concerned about provisioning Location based CAC on CTI ports.
    Chris

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • I can't add a DN to a CTI route point on Call manager due to...

    Hello,
    I'm trying to add a DN to a CTI route point which routes to Unity directly. This allows me to have a voicemail box be reachable that is not tied to a phone. So I can dial XXXX and leave a message for this person directly. The reason we have this setup is because 2 people share a phone and we have a call handler on the phone extension to route messages to person 1 or person 2 by pushing 1 or 2 if know one picks up the phone. The caller then obviously can leave the private message for person 1 or person 2 depending on who they wanted to talk to. I have the CTI route point up and running, and it works for 2 DNs that are set up on it. I'm adding a 3rd and 4th DN to this route point.
    The error message I receive says:
    "Add failed. Sum of device's line appearance values for maxNumCalls exceed device limitation". On the Multiple Call/Call Waiting Settings on Device ROUTE_TO_VM section(the name I gave the CTI ROUTE POINT) I keep changing the Max number of calls to 1 and busy trigger to 1 to see if this resolves it but it does not. I had to do this on the other DNs tied to this route point and that fixed the issue. This time it will not let me.
    Any ideas?

    Do you mean I should be adding a new separate CTI Route Point for each DN? I didn't think I had to because we have a separate one called FORWARDtoUnity and there 4 DNs tied to this one and underneath association information, it says "Line {5} - Add a new DN"...so it seems I can keep adding more. (Unless there is a limit of DNs per route point). So since this one has 4 DNs, I thought I could have 4 DNs on this new route point I created. I was wondering if I'm missing a step somewhere.

  • HT2470 HOW CAN I IMPORT WORD , EXCEL, POWER POINT FILES TO MICROSOFT 2011 PRELOADED IN MY I Mac ?

    HOW CAN I IMPORT WORD , EXCEL, POWER POINT FILES TO MICROSOFT 2011 PRELOADED IN MY I Mac ?

    First, don't post in all caps. It's considered shouting and very rude. As for your issue, http://answers.microsoft.com/en-us/mac

  • Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

    Dear Adobe Forum,
    I have the following problem, please help:
    I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
    avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
    What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
    Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
    Thank you in advance
    Leonardo

    Now I show you details of 2 files:
    the first video clip which you can import with sound (works):
    Video:
    1280 x  720
    data rate: 4259 kBit/s
    total bitrate: 4387 kBit / s
    Single bit rate: 29 single images / second
    Format                           : AVI
    Format/Info                      : Audio Video Interleave
    File size                        : 63.5 MiB
    Duration                         : 2mn 1s
    Overall bit rate                 : 4 388 Kbps
    ID                               : 0
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=3, N=15
    Codec ID                         : H264
    Duration                         : 2mn 1s
    Bit rate mode                    : Variable
    Bit rate                         : 4 248 Kbps
    Maximum bit rate                 : 4 001 Kbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.154
    Stream size                      : 61.4 MiB (97%)
    Audio:
    Bitrate: 128 kBit/s
    Channels: 2 (stereo)
    sampling rate: 48 kHz
    ID                               : 1
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format version                   : Version 4
    Format profile                   : LC
    Format settings, SBR             : No
    Codec ID                         : FF
    Duration                         : 2mn 1s
    Bit rate                         : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Stream size                      : 1.85 MiB (3%)
    Alignment                        : Aligned on interleaves
    Interleave, duration             : 21 ms (0.64 video frame)
    the second video clip which you can import without sound (doesn't work with sound):
    Video:
    1280 x  720
    data rate: 4278 kBit/s
    total bitrate: 4406 kBit / s
    Single bit rate: 29 single images / second
    Format                           : AVI
    Format/Info                      : Audio Video Interleave
    File size                        : 69.3 MiB
    Duration                         : 2mn 11s
    Overall bit rate                 : 4 407 Kbps
    ID                               : 0
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=3, N=15
    Codec ID                         : H264
    Duration                         : 2mn 11s
    Bit rate mode                    : Variable
    Bit rate                         : 4 267 Kbps
    Maximum bit rate                 : 4 001 Kbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.154
    Stream size                      : 67.1 MiB (97%)
    Audio:
    Bitrate: 128 kBit/s
    Channels: 2 (stereo)
    sampling rate: 48 kHz
    ID                               : 1
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format version                   : Version 4
    Format profile                   : LC
    Format settings, SBR             : No
    Codec ID                         : FF
    Duration                         : 2mn 11s
    Bit rate                         : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Stream size                      : 2.01 MiB (3%)
    Alignment                        : Split accross interleaves
    Interleave, duration             : 21 ms (0.64 video frame)
    Consequently, as you can see, they have both nearly the same information
    Both video clips have the following audio codec:
    AAC
    In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
    But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

  • How can i fix my wifi connection with my router

    how can i fix my wifi connection with my router?

    I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA. 
    I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad.  I'm unable to use the trackpad(bluetooth) and wifi at the same time.  If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine.  This configuration was working fine prior to upgrading to Yosemite.
    I experienced the same problem at home and at the office.
    Additional test:
    I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA.  The wifi disconnected as soon as I paired the headphones with the MBA.
    I have had no problems with the MBA's keyboard or integrated trackpad. 
    Rick

  • I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

    I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

    HI Dave,
    I'm surprised you get no message when you attempt opening the Excel document in Numbers.
    I'm assuming Numbers 3.1, since you are running Mavericks.
    Does the Numbers file that opens show any content?
    Does it contain a table?
    How large?
    Does it contain more than one tab (indicating more than one sheet)?
    Do those other tabs contain a table?
    Have you checked those tables for data content?
    There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
    I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
    Regards,
    Barry

  • How can i import procedure with %ROWTYPE in Oracle 10.2 (paris) warehouse b

    Hello.
    How can i import procedure with %ROWTYPE in Oracle 10.2 (paris) warehouse builder?Everytime i try to do it i get an error message:
    API0411: Name should be an empty string.
    If i comment out %rowtype i can import it without problems.
    I have tried re-creating the procedure in OWB but once again i cannot find the %rowtype anywhere. the %type is there etc. I have tried to use Publish transformation / custom and cannot find %rowtypa there either.
    Thank you very much for your help

    Just in case you are having the same problem and cannot find any help anywhere - it is a bug in OWB.
    I got in touch with Oracle Support and it appears that it is possible to import procedure/package with %ROWTYPE inside it, but it is not possible if the %ROWTYPE is in the arguments.
    Just waiting for them to provide me with the bug ID.

  • (HELP!)How can I import Windows Media Player Playlists, into iTunes Playlists, with Music . .  for an iPod

    How can I import Windows Media Player Playlists, into iTunes Playlists, with Music . .  for an iPod
    We are having no luck with the thousands of songs we have to manualy add to a particular playlist in iTunes alone. .. there must be a simpler way! How can this be done . . . if there is and it's complicated, is the Genius allowed to help us out with this? They seem to only master Mac's only. .  or can they help us? PL E A SE E E  HELLPPP!

    tt2,
    Your very helpful and knowledgeable. I for one appreciate all the hardwork and help you have been giving the people on theses lists, especially with the problems associated with the "importing playlists" from windows media. Unfortunately I need more help if you or someone else can provide it. I followed all the steps you have instructed so far in the threads I have seen. Unfortunately nothing so far works for me. Maybe you or someone can help me, I'd really appreciate it. I tried the notepad++ method and when I click on save I always get a notepad file that my iTunes can't do anything with. I click the "convert to UTF-8 without BOM" then click save as and it still saves as a notepad file. I am also unable to find the \n\ file path to replace with my \C:\ filepath. Here is a copy of the first part of one of my playlists:
    <?wpl version="1.0"?>
    <smil>
        <head>
            <meta name="Generator" content="Microsoft Windows Media Player -- 12.0.7601.17514"/>
            <meta name="ItemCount" content="161"/>
            <author/>
            <title>Power Surge</title>
        </head>
        <body>
            <seq>
                <media src="..\Various Artists\Mixed Tape 2\13 Out of Control.wma" tid="{650561AF-AA9D-4EA3-84CC-2F09C24DF3B3}"/>
                <media src="..\Various Artists\Mixed Tape 1\12 One Step Closer.wma" tid="{EE5ADD9D-A879-404A-BC60-CE841045BCB6}"/>
                <media src="..\Various Artists\Mixed Tape 1\15 Click Click Boom.wma" tid="{0F71941C-1B67-425F-BDAA-246618709179}"/>
    Now I went and switched the part from  <media src="..\ to <media src="C:\ in all the files in hopes that was where I am supposed to have my drive letter but it didn't seem to help. Please forgive my encoding ignorance if that's what my problem is. I hope you can help.  Thanks in advance.
    Madmaxneo

  • My HDD crashed and I had to reinstall my boot and programmes on a new HDD.  I managed to recover my library.itl.  How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

    My HDD crashed and I had to reinstall my boot and programmes on a new HDD.  I managed to recover my library.itl.  How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

    It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.

  • How can I import pics with the title info?

    How can I import pics with the title info? Title info not importing, just the pics with original title info

    jfromcal wrote:
    the info is on the pics on the cd I'm importing to my iphoto library. I maybe using the wrong terminology. Basically naming or writing a description underneath for each individual photo.
    js
    exactly where is it - the file name? in the IPTC data? Actually "on the photo"?
    LN

Maybe you are looking for