How can i import ics file to my ipad?

I am trying to import an ics file to my ipad, and I cannot get a headway. any suggestions?

PogoPossum wrote:
If it is a commercial DVD, you have to strip away the copyright protection and then convert it ... Many ways to do the latter, but the former is illegal in many countries and discussion of how to do so is not allowed on this forum.
Actually, as the owner of the DVD, you are permitted to make one copy.  You can use Handbrake to make an iPad compatible version of the DVD movie, then move it into the Videos section of iTunes.  From there, you can sync it with your iPad.

Similar Messages

  • HT5182 How can I import RAW files from my iPad to my MAC computer?

    iPhoto doesn't recognize RAW files on my ipad and unfortunately, I've deleted the images from the SD card in my camera. I'm concerned that I've lost access to these images for processing. Any advice?

    If the images are in iPhoto for iOS use the Share to iTunes feature. Then connect your iPad to the computer you normally sync with, open iTunes, select your iPad in the left column of iTunes and in the right column select General. Ten scroll down to find the File Sharing area and select iPhoto. You will see a pane where your photos are listed and you can copy them to your computer. I'm not completely sure the copies will be RAW files but at least you have saved a version of the photos.
    I use my iPad to review, display and post photos but I use my computer to actually process RAW files. While I often connect my camera to my iPad to transfer photos I never delete them from the card and ill eventually copy them to more than one hard drive.

  • How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

    How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
    I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
    Simply exporting from Premiere back to final cut is also very complicated.
    Thanks for any ideas.

    First, copy the card to a hard drive connected to your fcp workstation.  I always back up all card based media at least 2 or three times.  All hard drive will eventually fail.  It's a question of when, not if.
    I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files.  You can try importing these directly into fcp.
    If you don't, you can try something like clipwrap
    http://www.divergentmedia.com/clipwrap
    or
    Magic Bullet Grinder
    http://www.redgiantsoftware.com/
    But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy.  HDV is a problematic format.  Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

  • How can I import Raw files from a canon eos 6d?

    How can I import RAW files from a Canon Eos 6D into aperture?

    Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have  been in the latest update, 4.02.
    In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
    While I can't say for sure  Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
    regards
    And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

  • How can I import vob files into imovie 09?

    how can I import vob files into imovie 09? i have some home movies on dvd that i want to edit.

    You might want to look at this one too.  Very easy to use and it doesn't require the Apple MPEG-2 playback component.
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

  • How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

    How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

    Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

  • How can i import mpeg files into iMovie?

    how can i import mpeg files into iMovie?

    Where are your MPEG stored?
    I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

  • How can I import MP4-files in FCPX?

    How can I import MP4-files in FCPX? Should i convert the files? Do you know good (free) software?
    Thanks!

    MPEG-4 isn't nearly enough information. There are many other factors that determine whether it will work in FCP. Many MPEG-4 files can be imported and optimized directly into the application.

  • How can i import mpg files in i movie

    how can i import mpg files in i movie?

    iMovie cannot edit mpg files, unles they come directly from a supported camera.
    I would suggest that you use a free third party app to convert it.
    Get MPEG Streamclip from Squared 5, which is free.
    Drag you mpg clip into MPEG Streamclip.
    Then, FILE/EXPORT USING QUICKTIME
    Choose Apple Intermediate Codec, and save it where you can find it. You should be able to import this file into iMovie, using the FILE/IMPORT/MOVIE command.
    Note: If your file is an MPEG2 clip, you may need to purchase the Apple QuickTime MPEG2 Playback Component from Apple. MPEG Streamclip will tell you if you need this. Don't buy it unless you have to. It costs about $20. You just have to install the component. MPEG Streamclip will use it in the background.

  • How can I import m1v files in iMovie '09

    How can I import m1v files in iMovie '09?
    Many thanks

    You might want to look at this one too.  Very easy to use and it doesn't require the Apple MPEG-2 playback component.
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

  • How can I transfer .mov files to my iPad?

    How can I transfer .mov files to my iPad?

    If it's on a SD card in your camera, you cau use the camera connection kit, either by connecting the camera or inserting the SD card.
    If it's on your computer, you can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • How can I transfer "Pages" files  from my IPad to my Mac?

    How can I transfer "Pages " files from my IPad to my IMac, I cannot use ICloud because I have Mountain Lion installed on the IMac?

    Actually, you can use iCloud and the way that you so it is to log into iCloud.com on the Mac (use Safari for best results) click on the Pages icon and then drag the Pages files into the browser window. It works the other way around as well. Log into iCloud.com on the Mac and download the files from Pages (that you created on the iPad) in iCloud onto your Mac. You can click on the file in the documents window and select it to Download by clicking on the Gear icon or right click upon the file and select download.
    The files will then sync to the Pages app on the iPad - assuming hat you have use iCloud tuned on in Settings>Pages>Use iCloud>On. I have an iMac running Tiger 10.4.11 that I can still move Pages/Word files back and forth Iike this.
    Also, File Sharing with iTunes is a great way to move the files back and forth.
    iOS: About File Sharing - Support - Apple
    Message was edited by: Demo

  • How can i play aiff files on my ipad??

    Hello all,
    How can i play .aiff files on my ipad?? I mean without converting them into mp4 format. (Converting does by far not keep the quality!)
    Many thanks

    Hello John,
    this does not solve my problem, or at least i do not understand it. Because when i wanna transfer the file onto my ipad..... i do have a lot of backgroud noise due to the conversion and therefore the file is useless.
    is there any application whixh i could download? (app store ... and then how do i have to do?)
    best regards and thanks anyway for your answer......

Maybe you are looking for

  • Display keywords in full screen?

    I know you can see the attached keywords for specific fotos in the right panel, but is there a way to see them when you are in full screen mode. PSE allowed you to r-click and get "remove keyword" which functioned to tell you what keywords were attac

  • Open in adobe reader option doesn't appear

    I am unable to open PDFs in safari on my iPad air. I have the most recent version of Adobe reader installed and am using iOS 8. When I click on the "open in" option, nothing happens. There is no "open in adobe reader" option that appears.

  • Keeps asking for username password proxy server

    When i start Firefox 8 at work, Firefox keeps asking for username and password. I have fild in the network settings to not use a proxyserver for: 150.0.*;12.0.*. Now the startpage of Firefox is our ourIntranet which is: http://ourintranet (which has

  • Calendar Third Sunday of February doesn't show the correct day in all years

    Calendar Third Sunday of February doesn't show the correct day in all years? The day of month repeats the same day as saturday. Example: February 20 2010= Saturday. Sunday shows 20 and not 21. February 19 2010= Saturday. Sunday shows 19 and not 20...

  • Is it possible to set a tune purchased from iTunes as a ringtone.

    Is it possible to set a tune purchased from iTunes as a ringtone on an iPhone 4S?