How can I import JVC files (.mod) into iMovie?

I have an JVC Everio GZ-MC500E Camcorder which generates .mod files. These files can not be read or imported by iMovie. Does anyone know a work around? Is there any other apple program (shareware) that is able to import and convert these files?

DVD/iMovie work with firewire connected miniDV/D8 only.
Your mod files need a conversion but it may lose some quality.
You'll need:
MPEG Streamclip 1.5.1 (free) and the MPEG-2 Playback Component ($20 from Apple).
http://www.alfanet.it/squared5/mpegstreamclip.html
http://www.apple.com/quicktime/mpeg2/
Sue
iMac ppcG5 1.8 GHz 20FP & (2)iMac G4 800MHz 17FP Mac OS X (10.3.9) OS X 10.4.8 / iLife 4,5,6 Superdrives & 1 G RAM / QT6 pro

Similar Messages

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

How can I import mpeg files downloaded into itunes?

How can I import mpeg song files downloaded into itunes?

Where are your MPEG stored?
I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How can I import vob files into imovie 09?

how can I import vob files into imovie 09? i have some home movies on dvd that i want to edit.

You might want to look at this one too. Very easy to use and it doesn't require the Apple MPEG-2 playback component.
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

How can i import mpeg files into iMovie?

how can i import mpeg files into iMovie?

Where are your MPEG stored?
I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

How can I import Raw files from a canon eos 6d?

How can I import RAW files from a Canon Eos 6D into aperture?

Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have been in the latest update, 4.02.
In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
While I can't say for sure Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
regards
And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

How can I import MP4-files in FCPX?

How can I import MP4-files in FCPX? Should i convert the files? Do you know good (free) software?
Thanks!

MPEG-4 isn't nearly enough information. There are many other factors that determine whether it will work in FCP. Many MPEG-4 files can be imported and optimized directly into the application.

How can i import mpg files in i movie

how can i import mpg files in i movie?

iMovie cannot edit mpg files, unles they come directly from a supported camera.
I would suggest that you use a free third party app to convert it.
Get MPEG Streamclip from Squared 5, which is free.
Drag you mpg clip into MPEG Streamclip.
Then, FILE/EXPORT USING QUICKTIME
Choose Apple Intermediate Codec, and save it where you can find it. You should be able to import this file into iMovie, using the FILE/IMPORT/MOVIE command.
Note: If your file is an MPEG2 clip, you may need to purchase the Apple QuickTime MPEG2 Playback Component from Apple. MPEG Streamclip will tell you if you need this. Don't buy it unless you have to. It costs about $20. You just have to install the component. MPEG Streamclip will use it in the background.

How can i call this file path into my bsp-html to display the images?

Hi
I have a file path for an image like c:/test_logo.bmp.
How can i call this file path into my bsp-html to display the images?
moosa

Try this...
Can i have sample code in BSP-HTML to display images?

How can I pass a file refnum into and out of external c++ code? What type does it convert to in c++?

I am trying to write external c++ code that will read a file already opened by Labview and therefore assigned a refnum. (Unfortunately, I definately can't use the standard Labview vis.) However I am not sure what c++ type to use in order to manage the refnum.
All help and thoughts appreciated. Thanks,
Joanna

You could do ALL your file handling in C or C++ (MFC CFile for
example) and pass Microsoft file handles into and out of LabVIEW
instead of LabVIEW file references into and out of C. This may be an
easier way to attack the problem.
You could create a DLL in MSVC that exports a FileOpen function, a
FileClose function and a FileRead and/or FileWrite Function and then
call that DLL from place to place as required in your code.
It would help us if you would explain what kind of data you are trying
to read or write and what the application is. Is it binary data?
text files? Do you need some special Win32 file system feature like
file mapped memory? I guess what I am asking is what is your
motivation for doing file handling in C or C++?
Douglas De Clue
LabVIEW developer
[email protected]
"Rolf" wrote in message news:...
> A LabVIEW file refnum is an internal Magic Cookie to LabVIEW and there is no
> way to directly extract the actual information assigned to that Magic
> Cookie.
> However the CIN Reference Manual describes one function which allows to
> retrieve a lower level "File" handle and at least on Windows 32 bit and
> LabVIEW
> from version 5 up to and including 6.1 this "File" LabVIEW datatype directly
> maps
> to the Win32 API "FILE" Handle.
>
> The function to use is
>
> MgErr FRefNumToFD(LVRefNum refNum, File *fdp);
>
> It is declared in extcode.h or one of its dependant headers and exported
> from "labview.lib"
> all located in the cintools directory and you can link this lib also to a
> normal DLL project.
> However calling this DLL then from any other process than LabVIEW or a
> LabVIEW
> executable will not initialize the DLL anymore correctly.
>
> Your best option if you need to write in C(++) should be to use the LabVIEW
> file manager
> functions described on the External Code Manual (manual/lvexcode.pdf) on
> this File handle.
> If you need to use directly some Win32 API functions with it please note
> that although currently
> the "File" in the LabVIEW file manager functions matches the FILE in Windows
> 32 bit API
> functions this is an undocumented and hence unsupported feature. The next
> LabVIEW version
> may actually use a different datatype for its "File" parameter to the
> LabVIEW file manager calls
> and your use of assuming File == FILE may simply crash.
>
> Also operating on a file refnum in LabVIEW which has been accessed directly
> with Win API
> functions may result in strange behaviour such as the file read/write mark
> not being updated as
> you would maybe expect it.
>
> "Jo" wrote in message
> news:50650000000800000016520000-1023576873000@exchange.ni.com...
> > How can I pass a file refnum into and out of external c++ code? What
> > type does it convert to in c++?
> >
> > I am trying to write external c++ code that will read a file already
> > opened by Labview and therefore assigned a refnum. (Unfortunately, I
> > definately can't use the standard Labview vis.) However I am not sure
> > what c++ type to use in order to manage the refnum.
> > All help and thoughts appreciated. Thanks,
> > Joanna

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

How can I import m1v files in iMovie '09

How can I import m1v files in iMovie '09?
Many thanks

You might want to look at this one too. Very easy to use and it doesn't require the Apple MPEG-2 playback component.
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

How can I import JVC files (.mod) into iMovie?

Similar Messages

Maybe you are looking for