How can I import mxf files from my Canon XF100?

I downloaded software/plugins from Canon. Didn't help.

Here is the plug-in you need.
These files import easily into FCPX with this installed. (Don't pay for a converter.)
Use a card reader. Import directly from the card or make a camera archive.
Good luck.
Russ

Similar Messages

How can I import Raw files from a canon eos 6d?

How can I import RAW files from a Canon Eos 6D into aperture?

Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have been in the latest update, 4.02.
In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
While I can't say for sure Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
regards
And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

How can I upload raw files from my canon g7x to lightroom5

How can I upload raw files from my canon g7x to lightroom

See this thread in the official Adobe feedback forum: Why doesn't my version of Photoshop or Lightroom support my camera?

How can I import Quicken Files from a G4 to a new iMac.

I need to transfer my Quicken 2007 files from my G4 to my new iMac. My G4 is running OS 10.4 and Quicken Essentials for Mac requires 10.5 or above. My G4 cannot run 10.5. My iMac is running Lion and I've heard if I load Mac Essentials on my iMac, I won't be able to import the files from my G4. Anybody have any ideas?
I've been considering making a copy of my system and applications folders on an external firewire drive, then connecting it to my iMac. I thne plan to use the external drive as a startup disk and load Quicken essentials on the external drive. Then, once eveything is loaded, I was hoping I could copy the files and pull them over to my applications folder on my iMac. Does anybody know if that will work?

I'm in the same boat!!! Been a long Time Quicken user and they finally made the software almost un-useable. I have 2 intel laptops in the house and a G4. The intel systems are both running Lion had I known the quicken conversion software dosen't run on Lion I would have converted all my quicken backups (going back to 1997) before installing Lion.
To answer your question, what I have found out is convert all your files on Lepoard then update to lion. The conversion software that comes with Quicken Essentials will work on Lepoard. Thats how I converted mine. But last week I needed to go back to and old backup looking for some transactions and found the Lion issue. Had to boot up the G4 and load the old Quicken software to look at the backups.
Been really thinking of switching to another product.

How can I import Master files from my iPhoto library to my Aperture lib?...

... That is knowing that I have already imported all my iPhoto library but I selected the option "in their current location" from the "store files" pop-up menu.
So right now, all my pictures are referenced images in Aperture but stored in their current locations on the iPhoto folder.
I simply want to get the masters back into Aperture.
How can I do that?
Thanks a lot for you help

There are some tutorials here
http://www.apple.com/aperture/tutorials/
one of which is specific to Aperture/iPhoto
Essentially though what you are wanting to do with your referenced master files is to
File/Consolidate Master/
Definitely worth having a read of the pro's and cons of managed vs referenced files.
RB maintains a great site with a wealth of ideas on workflows, worth having a erad of these.
http://photo.rwboyer.com/
Tony

How can I import AVCHD files from my hard drive?

- How can I work with .mts files from my Sony camera that I dragged from the camera to a folder on my computer. If I understand it well, if I import the files with a Log and Transfer, they will be converted to another format.
- do they lose quality with the Log and Transfer conversion?
I want to erase my sony camera hard disk but do not want to lose the original files, that is why I ask.

Hi -
In order to use the files from your camera easily (without 3rd party software) you need to not only drag the mts files, but the ENTIRE DIRECTORY STRUCTURE of the camera storage to your hard disk drive. Many people find it most convenient to use Disk Utility to make a disk image of the camera storage media, and keep the disk image on their hard disk, available for re-use at any time.
The additional folders that are present on the camera storage give necessary and valuable information to Final Cut as to how to "unpack" the extremely compressed video files. Without these files as guides and instructions, it becomes a much more difficult process.
MtD

How do I import .mxf files from an external hard drive onto FCP 5.1.4?

I have an external hard drive and it is full of .mxf files. I am trying to import them but when I click import-folder, the only thing it imports from the Contents is the Icons folder.
Next, I try to log and capture. It tells me I can only capture now, so I click "Now" and a viewer window flashes with nothing in it, then disappears. And then nothing happens.
Also, I don't even see the "Log and Transfer" button. Is that because my version is too old?
Can someone who knows a lot more than me give me guidance so I can be concerned with actually editing it in my time sequence? Thank you!

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

How can I import raw files from nikon d810 to elements 12

How ca raw files be imported into elements from a nikon d810

If the images are in iPhoto for iOS use the Share to iTunes feature. Then connect your iPad to the computer you normally sync with, open iTunes, select your iPad in the left column of iTunes and in the right column select General. Ten scroll down to find the File Sharing area and select iPhoto. You will see a pane where your photos are listed and you can copy them to your computer. I'm not completely sure the copies will be RAW files but at least you have saved a version of the photos.
I use my iPad to review, display and post photos but I use my computer to actually process RAW files. While I often connect my camera to my iPad to transfer photos I never delete them from the card and ill eventually copy them to more than one hard drive.

Can't importe MXF-File from Canon XF300, 4.2.2 codec

premiere pro 4.2.1 say the video is too big; doesn't CS4 support this codec???

sounds suspiciously like the prores 4.2.2. from panivision genesis..maybe close to hdcam hd...
some info on that stuff that might help determine custom settings, maybe conversion first without loss...etc..
hdcam hd
http://www.apple.com/finalcutstudio/resources/white_papers/Sony_XDCAMHD_whitepaper.pdf
Ingest
Once all footage has been shot, it must be transferred to a computer hard disk for
editing and converted into a format editable by Final Cut Pro. Although the XDCAM
HD camera records directly to digital files on the Professional Disc, the files are stored
in a special file type called MXF (Material Exchange Format).
In order to edit the files in Final Cut Pro, the data within the MXF files must be transferred
to QuickTime files. This translation does not damage or cause quality loss to the
video files. The MPEG HD data is simply unwrapped from the MXF file and rewrapped
in a QuickTime file.
One additional benefit of the XDCAM HD format is that low-resolution proxies of every
clip are automatically created and stored on the Professional Disc media. These proxies
allow you to quickly view the clips before importing the full-resolution data and
choose which clips to ingest and which to leave on the Professional Disc media. You
can even log different sections of the proxy clips (using In and Out points) to avoid
importing unwanted parts of the full-resolution HD files you may not need for editing.
more info
http://bssc.sel.sony.com/BroadcastandBusiness/docs/brochures/v-2320.pdf
ps...I imagine the camera manufacturer would have info available for editing this material , maybe free software for "capturing", conversions, etc

How can i import my files from an Acer into my new iMac - easiest idiot proof solution pls

i bought an iMac, and would like to migrate all data from my old Acer aspire one over to the mac
i tried thru wireless ------ too dumb for it - or to bad step by step guides to do it
same for connecting the two by ethernet....
can someone guide a dummy thru this pls?

Do you have a USB flash drive or an external hard drive, if so then plug it in to your USB port on your Acer and copy your my documents folder to to the drive. After ejecting the drive insert it into the Mac and copy the files into your home folder. I would copy folder to folder from drive, for example; your documents folder files from Acer to Mac documents folder and so forth.

How can I import the files from a SDXC card to my iMac?

When I connect my camcorder to my iMac, the iMac can't read the SDXC card (SanDisk SDXC Ultra 64Gb, 15MB/s).
The camcorder itself, ofcourse, supports the card.
Is anyone familiar with this problem?
I have the latest OS software (10.6.4), and my iMac 24" is an early 2009 model.
Thanks, in advance.
B.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

How can I import images directly from my Canon EOS 6D to Lightroom?

When I try to import from my Canon EOS 6D camera to Lightroom, the Canon EOS software intervenes and wants to take over. I have to quit that software, go to Lightroom, and import from there. This happens whether I use the USB cable or a reader. I'm new to Lightroom. When I used Apple Aperture, the import was immediate. Aperture opened and started the process as soon as I connected the camera to my computer. Any idea what's happening here and how I can fix it?

Do you need the Canon software? Uninstalling it would solve the problem. If it's anything like the Nikon software, it's not worth keeping ...
On Windows, you could possibly fix it by changing the file association for canon files, don't know how that's done on a Mac, though.

1. importing MXF files 2. Canon XF100

1. Can MXF files be imported/ingested into FCP 7.0.3?
2. Can anyone recommend a suitable work flow for FCP 7.0.3 and Canon XF 100 and Canon XF Utility and plug in
3. If the Canon XF 100 FCP plug in has been installed should it be visible anywhere?
thank you in anticipation

1. Yes. You need to download the Canon XF Log and Transfer plugin in order for this to work:
http://software.canon-europe.com/software/0040354.asp?model=
2. Yes...I have a full tutorial on the tapeless workflow with FCP, found here:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
3. No...well, yes, but it is a system file buried in the OS. Just install it, and then use the Log and Transfer workflow.

How can I import mxf files from my Canon XF100?

Similar Messages

Maybe you are looking for