How can I import network tags programmatically

How can I import network tags programmatically from a remote DSC module 6.1 application and save it to the local SCF-File ?

Programmatic tag configuration/importing is not possible in 6.1. Some steps, specifically the importing, have to have user intervention.
Regards,
Khalid

Similar Messages

How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

How can I import Firefox bookmarks, now stored in User folder on same (new) PC, into Firefox?

How can I import Firefox bookmarks, now stored in User folder on same (new) PC, into Firefox? I have exported the Firefox bookmarks from my old PC into a [Windows 8] folder on my new PC.
When I use the Firefox import facility, it will only import one bookmark at a time - and then it bookmarks all the main pages on the bookmarked website, not just the one which I originally bookmarked. It also does not import the information stored in the bookmark tag.

Sure thing.
# Open the run dialog by holding the Windows key and pressing R
# Type <code>%appdata%</code> into the run window and press ok
# Open the ''Mozilla'' folder
# Open the ''Firefox'' folder
# Open the ''Profiles'' folder
# Copy the folder that is located in this folder to a USB drive
# Install and run Firefox on the new computer
# Close Firefox
# Repeat steps 1 to 5 on the new computer
# Open the folder that you copied from the old computer
# Copy the contents of that folder into the folder located inside of the new computer's profile folder
# Allow Windows to replace any duplicate folders with the ones that you are copying onto the computer is prompted
If you have any problems following these instructions or if you need further help, please feel free to comment below.

How can I import a javascript file in page template--11G update 2

Hi,
Since we don't have the <document> tag in page template how can I import a java script file ?
--11G update 2
Thanks

Hi,
best option is
<trh:script>
</trh:script>
second best
<f:verbatim>
</f:verbatim>
in JDeveloper 11 R1, the next release, trh:script can be replaced with af:resource
Frank

How can I import F4V or flv files

I downloaded some videos from tudou.com ,I want to edit them ,but it seems that i can't import them to PR cs6 , They are f4v files ,and some flv files also can't be imported,    my win8 system had installed    win8 codecs ,but no work ,i changed   win8 codecs   to K-lite codecs   , still no work
so ,i wonder how can i import the f4v files~
thanks!!!
the video information is below
General
Complete name                  : D:\视频\秦时明月-万里长城\万里长城01.f4v
Format                         : Flash Video
File size                      : 489 MiB
Duration                       : 22mn 0s
Overall bit rate               : 3 105 Kbps
Writing application            : m_0682044e1fb8335ad6dca1f39d84f022_md Tudou, Inc.
Tagging application            : Tudou Metadata Injector for FLV - Version 1.0
liveXML                        : <?xpacket begin="" id="W5M0MpCehiHzreSzNTczkc9d"?>
Video
Format                         : AVC
Format/Info                    : Advanced Video Codec
Format profile                 : [email protected]
Format settings, CABAC         : Yes
Format settings, ReFrames      : 4 frames
Codec ID                       : 7
Duration                       : 22mn 32s
Bit rate                       : 2 965 Kbps
Width                          : 1 280 pixels
Height                         : 720 pixels
Display aspect ratio           : 16:9
Frame rate mode                : Constant
Frame rate                     : 25.000 fps
Color space                    : YUV
Chroma subsampling             : 4:2:0
Bit depth                      : 8 bits
Scan type                      : Progressive
Bits/(Pixel*Frame)             : 0.129
Stream size                    : 478 MiB (98%)
Audio
Format                         : AAC
Format/Info                    : Advanced Audio Codec
Format profile                 : HE-AAC / LC
Codec ID                       : 10
Duration                       : 22mn 0s
Bit rate                       : 61.7 Kbps
Channel(s)                     : 2 channels
Channel positions              : Front: L R
Sampling rate                  : 48.0 KHz / 24.0 KHz
Compression mode               : Lossy
Stream size                    : 10.3 MiB (2%)

Do you mean that my video files are encrypted?but i tried the old flv files ,i am sure the files 2 years ago were not encrypted，
Thank you all the same！

HT201302 how can i import photos from iphone to pc

how can i import photos from iphone to pc?

For photos taken with the iPhone or saved from emails/websites then on a PC you should be able to use the Windows Camera Wizard or just copy them via Windows Explorer (there is more info on this page).
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPhone, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

How can I import images from iphoto with the albums and folders?

How can I import images from iphoto without losing the albums and folders I already created?

In Organizer, you can choose File>get Photos and Videos>From iPhoto.
Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
Hope this information helps!
regards,
vaishali

How can I import to my iMac's Aperture from my MacBook Air?

Hello!
I started working with relativily small librarie in my MacBook air, it has a size of 12GB more or less.
My question is: how can I import/merge this library to my iMac library.
Thanks.
Federico

Whatever you can. Dropbox. Ethernet. Firewire. Thumb-drive. I'm pretty sure you can set up an ad-hoc wireless network between the two machines.
Message was edited by: Kirby Krieger -- link added.

How can I import Canon GPS location from one picture in project to remaining pictures in project?

How can I import Canon imbeded GPS location from one picture in project to remaining pictures in project?

If you have several photos taken at the same location you can use the Lift&Stamp tool to copy the GPS data to the other images.
Seelct the image, press the "Lift" button, deselect all tags in the Lift&Stamp HUD but the GPS coordinates, then select all photos taken at the same place and and press the "Stamp" tool. (marked by the down arrow)
Alternately use the "Places View". You will see the photos with a GPS location marked by a pin. Drag the photos you want to assign to the same place simply to that pin on the map and they will be assigned to the same place.
Regards
Léonie

How do i import keyword tags from PSE12?

I have just downloaded PS and LR5 from Adobe CC. I was using Photoshop Elements 12. How can I import my keyword tags from the PSE Organizer. I saved them as .txt files but they will not import because they contain "special characters." What do I do? Please do not tell me I have to start over... ~

is there a way to import tags from PSE 12
The PSE 12 Organizer and LR 5 use different file formats for exporting and importing keyword hierarchies. PSE uses XML format, while LR 5 uses a tab-separated format. If you're a programmer or technically minded, you could convert from one to the other using your favorite scripting language.
But the approach suggested by dj_paige can be modified to accomplish what you want without scripting, by copying the keyword hierarchy from the "upgraded" LR catalog that was created from your PSE catalog to your "good" LR catalog:
1. Make a manual backup of your "good" LR catalog: Lightroom Help | Back up a catalog.
2. In LR, open the catalog that you created previously by upgrading (converting) the PSE catalog -- you can usually get to that catalog by doing File > Open Recent.
3. Go to grid view in the Library by doing Window > Library followed by View > Grid (usually you're already in Library grid view, but just in case...)
4. Make sure the Keyword List panel is showing on the right by doing Window > Panels > Keyword List.
5. You should see the keyword hierarchy from your PSE catalog. If you don't, stop and post a screen shot of the entire LR screen.
6. Do Metadata > Export Keywords to export those keywords as a LR-format text file.
7. Open your "good" LR catalog by doing File > Open Recent.
8. Do Metadata > Import Keywords and select the file you exported in step 6.
9. All the keywords that were exported in step 6 will be added to the current catalog, and there will be duplicate keywords if there were already keywords of the same name in the catalog. Those new keywords will not be attached to any existing photos in the current catalog.

How can you start the tag config editor from a vi or when labview starts?

how can you start the tag config editor from a vi or when labview starts?

Hi,
There is a VI called "dsc_TagEditorLauncher.vi" under "C:\Program Files\National Instruments\LabVIEW 7.1\project\lvdsc" folder that can be used to launch the TCE programmatically. I hope this helps.
Best Regards,
Remzi A.
Applications Engineering
National Instruments

How can i import pics from my iphone to my compurer

how can I import photos from my iphone to my compurer

Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

How can i import songs from......

how can i import ongs on itunes on a new computer....i have a new laptop and installed my itunes cd on it....i cant get my songs onto that library
how do i get all my songs from one library to another?

try copying the songs from your itunes music folder over your network and paste them in the itunes music fold. Then in iTunes go File add folder to library and selecet the folders you copyed.

How can I display selected tags across multiple e-mail addresses?

I receive email on a specific topic but via several e-mail addresses. How can I view selected tags where the resulting e-mails span several (7) email addresses. They are all active on my Thunderbird, but as far as I know, I can only display the selected tag on one of them at a time.
Any assistance greatly appreciated as this is a very big problem for me.
thanks, Ron75

This solution does not appear to work across multiple e-mail addresses.
Perhaps I should have said "work across multiple e-mail address at the same time. I get e-mail on specific topics via several email addresses and wish to view all the tagged emails regardless of which email account in which they reside.
I could not get this solution to select more than one email account at a time.

How can i import contacts from another AIM account to this new one

If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
How can I import contacts from another AIM account to this new one??

Hi,
Use AIM for Mac and use the Export and Import features.
Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
9:08 PM Thursday; February 7, 2008

How can I import network tags programmatically

Similar Messages

Maybe you are looking for