How can I improve screen resolution on tablet

I loaded Firefox for Android on my Motorola Zoom. I set it to request the desktop site. When the site comes up it is very blurry. Not sharp and crisp like other screens on the tablet. If I double tap to zoom in the resolution gets better. How can I improve the resolution? The basic Android browser is very crisp.

Try with Firefox Beta
use this addons for desktop view
*https://addons.mozilla.org/en-US/android/addon/phony/
For more addons
*https://addons.mozilla.org/en-US/android/

Similar Messages

Finally upgraded to Lions OSX. The Mac screen is now hard to view as everything has a grey tinge. How can I improve this? Tried

Finally took the plungs and upgraded to Lion OSx so that I could access icloud. Everything worked ok but I now find it difficult to view the screen. Everything has a grey tinge and with my poor eyesight it's really frustrating. Zooming in is ok but I would really like more contrast. What was wrong with crisp white and deep black? Have tried to change the profiles in System Preferences but it's confusing to follow and after 3 attempts I still don't like any of the profiles. My photos all have an unnatural colour now. How can I improve this and bring everything back to 'normal'? Whose 'bright' (?) idea was it to make everyting grey and why???

Thanks. Very helpful. It's now less of a strain for me. But the fonts are still too pale. I really need to be able to read words that are black. In Mail, the sender and headings are dark enough, but the content is still too light for me to read without straining. Any other suggestions?

How we can recover the screen resolutions on maverick

how we can recover the screen resolutions on maverick

Hi
Deleting invoice is a data base action that deletes the record from the table and won't right these records to any history tables. The only way is to re enter the invoice from hard copy. Where as Cancel invoice will behave differently.
Is it manual invoice or invoice created from ERS etc?

How can I improve quality of image when burning a movie to a DVD

How can I improve quality of image when burning a movie to a DVD?

What resolution are you using? If the DVD is to be playable on an ordinary DVD player, only ordinary TV resolution is supported. You need Blue ray for HD.
Geoff.

How to change the screen resolution

Dear All,
Could someone please help and tell me how I can change the screen resolution (i.e. the dimensions of the monitor) in Solaris 10 using CDE?
Regards and thanks a lot for your reply

This site has some instructions on how to do this: http://solaris-x86.org/documents/tutorials/cde.mhtml

How can I improve download speed

How can I improve download speed of movies purchased from iTunes on my AppleTV? 10 hours+ minimum. I've already selected a lower video resolution from the settings in the iTunes store. It used to be way faster. Any suggestions? Thanks.

Check the Internet speed to confirm it is what it is supposed to be by going to www.speedtest.net
On the ATV, try Settings > General > Reset.
Power cycle the router, modem, and the ATV

HT1651 how can i improve my macbook's performance without installing memory

how can i improve my macbook's performance without installing memory

More RAM & bigger faster Hard Drive will help, maybe a better Graphics card also, since 10.5 ises the Video much harder.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected

How we will maintain screen resolution for tmaintaining able control in BDC

how we will maintain screen resolution for tmaintaining able control in BDC. can you give the code or how we have to set it

Hi,
You need to use the CTU_PARAM options with the call transaction method.This is used if you would like to do a commit work once call trnasaction is done. This has also got very important property, for example if your Screen resolution is different from others then the screen (Application) will be different that is you'll be having say 5 lines in your screen where as your friend will be having 8 or 10 so your program might fail in this case. If you set variable DEFSIZE as 'X' it will always use the default screen size and hence avoids error.
Use CALL TRANSACTION 'XXX' OPTIONS FROM w_ctu_params.( type CTU_PARAMS)
This structure contains the follwing.
DISMODE : Display mode (like the MODE addition)
UPDMODE: Update mode (like the UPDATE addition)
CATTMODE: CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
RACOMMIT: Do not end transaction at COMMIT WORK
NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND : No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
This might help u in better understanding...
Re: regarding bdc
Re: ctu_params
Regards
Sudheer

Qosmio X500 - How to increase the screen resolution?

Hi,
Does anybody know how to increase the screen resolution? My qosmio X500 is 1920 x 1080 and I want to raise it to 1920 x 1200.
Thank you/Red

Hey
1) I think the screen brightness is about 180 nits for this qosmio model. If I change the graphics card, can I increase the brightness to 300 NITS levels? If yes, which card do you suggest? If not, how can I achieve this?
2) When I view the screen in 100 % magnitude, then the texts are too small to read. But then when I view the screen in 125 % or higher, then the texts go blurry. Is there a way to avoid this?

How can I improve picture quality...now grainy after IOS update!

How can I improve picture quality...now grainy after IOS update!

Hello, dreamer5th.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue. They are labeled for the iPhone; however, the steps also apply to your iPad. Also, make sure to test the camera in well lighted conditions as this can affect picture quality.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Hardware troubleshooting
http://support.apple.com/kb/ts2802
If the issue persists see the last section labeled Issue not resolved.
Cheers,
Jason H.

How can I improve the stability of itunes64bit 8.0.2 on my Vista system?

Vista Home Premium: iTunes64bit: application crashes after adding album photos and then changing views (list, Album, split) or clicking on different playlists and back to the entire music library.
The library has 42,000 items (mostly music) so it is quite large. At launch it takes a long time for itunes to load and display. There is no user cues telling me it is running. It simply displays after 60 or more seconds.
Then I start working in the library, pasting pictures to multiple items, modifying album titles.
After doing a few management tasks on my music items and navigating back and forth between the music library and playlist (changing views), the application stop being responsive and according to the log, the app just plainly crashes.
Sometimes I can restart successfully but most of the times, I need to stop the itunes service or log-out before I can restart it successfully.
I am using itunes64bit 8.0.2
I am running it on a machine equipped with 4GB of ram and the library lives on a 500GB external hard drive plugged-in through USB 2.0.
How can I improve the stability of itunes64bit on my system?
Message was edited by: JF Boisvert

This VI can be convert to labview 8.0 because subvi are not compatible with old version.
I post a screenshot.
Aurélien J.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...
Attachments:
image.jpg ‏38 KB

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can i improve a performence of query

How can i improve performence of query which not having the where clause for a table

whenever the query have the where clause then only it can use the indexes
otherwise how it can use the index eventhough we create the index of that table columns.

How can i improve jsf application? It eat a lot of CPU.

I use only request beans, state save method is server.
How can I improve it, what is with state manager, save state tree.?

Profile your application and find the CPU hotspots. Then you can figure out what needs improvement.

How can I improve screen resolution on tablet

Similar Messages

Maybe you are looking for