How can I improve the sound of my Qosmio F-25?

The sound quality on my Qosmio is not good enough.
What can I do?
[Edited by: admin on 26-Jan-06 07:07]

Not good enough?
With the Harman/Kardon combined with Toshiba Virtual Sound application, it sounds fantastic to me.
Maybe you're using 2 sound enhancement programs at the same time, like Media PLayer with SRS sound enabled and TVS active. In this case you need to disable one of them or the sound will be distorded.
In the readme of TVS, it says to disable SRS in WinDVD and in WMP.
Later,
Alcahest

Similar Messages

How can I improve the sound in final cut express using my mic?

How can I improve the sound in final cut express using my mic?

I think you're in the wrong forum. This is the LiveType forum. There is no sound in LT.

How can I improve the sound quality of my new iPod?

Hey there,
I just received my new iPod with my new MacBook Pro computer.
I have read every bit of documentation i received plus I have scoured resources here on the forum, but I am baffled.
I just synced my iPod for the first time to my Macbook, iTunes,
With the supplied earbuds (from the iPod), the sound is not very good at all. In fact, it the sound of each song seems to break up quite a bit, and the clarity is not very good.
As an experiment, I plugged the earbuds directly into my MacBook using the same songs, same quality, etc, and the MacBook sounds decidedly better.
What can I do to improve the tonal quality that is so lacking in my iPod compared to the same recordings on my computer?
Any tips? Tricks?
Thanks for your input.
Joel
www.readyacoustics.com

Ok Joel, I think I have the answer for you.
First, the iPod sound. The 5th Gen iPod is a good sounding unit. It has been designed to have a flat, neutral - uncoloured - sound, which is a good thing.
There should not be that much of a difference in sound quality between the iPod and the MacBok Pro. Are you sure that all settings are equal on both units? For instance, make sure that the eq is flat on both units, and same goes for the output level. For the same material being played, the louder one will be perceived as sounding better.
There are ways to improve dramatically the sound you hear from your iPod: (a) better headphones (b) a mini, portable headphone amp.
(a) better headphones: For a good roundup, check out these two sites:
http://store.earphonesolutions.com/shureearphones.html
http://www6.head-fi.org/forums/forumdisplay.php?s=&forumid=2
I would say that the new Shure E500 (around US$450) would be on top of my list, price not being an issue. It seems like they're good no matter what you're listening to. All others seem to sound good on, say, classical/acoustic, but are way too flat - read boring - for modern music, such as techno or house, or R&B. The brand "Etymoyics" fall into this category, for example. But then again, some people would disagree, so read as much as you can on one of the forums I mentioned above, Headfi - really good.
(b) mini headphone amp: These are very small and portable, and people who have bought them swear by them. Check out Headfi again, this time on their amp forum:
http://www4.head-fi.org/forums/forumdisplay.php?s=&forumid=3
Think about spending about around $500 for a great little portable amp. They're made by enthusists, small-scale companies. Real jewels, some of them, and I mean jewel in terms of quality, not just looks.
Anyway, this should get you started...Good luck.
A.

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can i improve the speed of my mac?

my mac has 667 MHz, how can i improve the speed?

Sorry if that sounded not very helpful, but basically it comes down to that. Not much can improve the performance of machine of that vintage, to stand up to a current model, unless you spend almost as much on upgrades (some of which to consider are listed below).
Some thought should be given to the budget (money and time and effort) one is willing to spend. The G4 Digital Audio is possibly a good candidate for upgrading for someone who is interested in do-it-yourself computer stuff and bargain hunting for parts. It can even be a fun hobby. But even max-ing out all possible upgrades will still be lacking in performance compared to the current Mac models, I don't actually have any specific benchmarks, just my gut feel. And you may spend a good portion of the cost of a new machine on all those parts for the old machine.
Is this the 667MHz machine (G4 Digital Audio) in question?
http://www.lowendmac.com/ppc/digital-audio-power-mac-g4.html
http://eshop.macsales.com/Descriptions/specs/Framework.cfm?page=g4da.html&title= Power%20Macintosh%20G4%20Digital%20Audio
or is it some other model?
Here are some CPU upgrades, for example:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=162&type=Processor&T I=2420&shoupgrds=Show+Upgrades
you can even get a small rebate for your original CPU
http://eshop.macsales.com/Service/rebate-program/
Any of those CPUs should double your processing speed, but you may also need more RAM...or the CPU will just be waiting for data to be read from the virtual memory on the hard drive.
http://eshop.macsales.com/item/Other%20World%20Computing/133SD512328/
you could max it out with a whopping 1.5 GB, with 3 of these.
and you may need a better video card...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=162&type=Video&TI=29 34&shoupgrds=Show+Upgrades
To add larger and faster hard drives than the original Ultra ATA/66 can handle you would need a PCI ATA133 or PCI SATA card...
http://eshop.macsales.com/item/ACARD/AEC6280MOB/
http://eshop.macsales.com/item/Sonnet%20Technology/TSATA/
And if you need to install OS X from a DVD, and want to burn your own DVD, you may need a new optical drive, if one hasn't been installed already, to replace the CD-RW:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?Model=162&Type=InternalOpticalDrives&sort=pop
Also, check out the Power Macintosh G4 forums if you have any questions about that particular model, (if I guessed correctly)
http://discussions.apple.com/category.jspa?categoryID=113
Even while I am trying to build a case to convince someone not to waste their money on this project, I am thinking to myself, where can I pick up one of these G4 towers to take on this project myself. Maybe a Quicksilver, no a FW400 MDD dual-boot for sure, I still have some OS 9 software. I did about all I can with my G3 Desktop, and spent more than my MacBook cost.

How can I improve the stability of itunes64bit 8.0.2 on my Vista system?

Vista Home Premium: iTunes64bit: application crashes after adding album photos and then changing views (list, Album, split) or clicking on different playlists and back to the entire music library.
The library has 42,000 items (mostly music) so it is quite large. At launch it takes a long time for itunes to load and display. There is no user cues telling me it is running. It simply displays after 60 or more seconds.
Then I start working in the library, pasting pictures to multiple items, modifying album titles.
After doing a few management tasks on my music items and navigating back and forth between the music library and playlist (changing views), the application stop being responsive and according to the log, the app just plainly crashes.
Sometimes I can restart successfully but most of the times, I need to stop the itunes service or log-out before I can restart it successfully.
I am using itunes64bit 8.0.2
I am running it on a machine equipped with 4GB of ram and the library lives on a 500GB external hard drive plugged-in through USB 2.0.
How can I improve the stability of itunes64bit on my system?
Message was edited by: JF Boisvert

This VI can be convert to labview 8.0 because subvi are not compatible with old version.
I post a screenshot.
Aurélien J.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...
Attachments:
image.jpg ‏38 KB

How can I change the sound of push notifications on an iPhone 4 running with iOS5?

How can I change the sound of push notifications?
In settings > sounds there are various options but not the a possibility to change the general sound (!!!) of push notifications.
Example: How can I change for instance the sound of the push notification of for example the New York Times notifications.
Thanks for the help!
Product: iPhone 4 running with iOS5

What you see - what is available for this is what you get.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

How can I Improve the Performance using Global Temo Tables ??

Hi,
Can anyone tell me , How can i make use of Global Temporary Tables to improve the Performance.
I have few sample scripts ,
Say i have the View based on some Complex query like ,
CREATE OR REPLACE VIEW Profile_values_view AS
SELECT d.Profile_option_name, d.Profile_option_id, Profile_option_value,
u.User_name, Level_id, Level_code
FROM Profile_definitions d, Profile_values v, Profile_users u
WHERE d.Profile_option_id = v.Profile_option_id
AND ((Level_code = 'USER' AND Level_id = U.User_id) OR
(Level_code = 'DEPARTMENT' AND Level_id = U.Department_id) OR
(Level_code = 'SITE'))
AND NOT EXISTS (SELECT 1 FROM PROFILE_VALUES P
WHERE P.PROFILE_OPTION_ID = V.PROFILE_OPTION_ID
AND ((Level_code = 'USER' AND
level_id = u.User_id) OR
(Level_code = 'DEPARTMENT' AND
level_id = u.Department_id) OR
(Level_code = 'SITE'))
AND INSTR('USERDEPARTMENTSITE', v.Level_code) >
INSTR('USERDEPARTMENTSITE', p.Level_code));
Now i have created the Global temp Table as ,
CREATE GLOBAL TEMPORARY TABLE Profile_values_temp
Profile_option_name VARCHAR(60) NOT NULL,
Profile_option_id NUMBER(4) NOT NULL,
Profile_option_value VARCHAR2(20) NOT NULL,
Level_code VARCHAR2(10) ,
Level_id NUMBER(4) ,
CONSTRAINT Profile_values_temp_pk
PRIMARY KEY (Profile_option_id)
) ON COMMIT PRESERVE ROWS ORGANIZATION INDEX;
Now I am Inserting the Records into Temp table as
INSERT INTO Profile_values_temp
(Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id)
SELECT Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id
FROM Profile_values_view;
COMMIT;
Now what my doubt is, when do i need to execute the Insert Statement.
Say , if the View returns few millions of records , then loading such a data into Global Temporary table takes lot of time.
Then what is the use of Global Temporary tables and how can i improve the Performance using the same.
Raj

Thanks for the responce ,
There are 2 to 3 complex views in our database, and there always be more than 5000+ users will be workinf on the application and is OLTP application. Those complex views are killing the application performance.
I what i felt was, if i create the Global Temporary tables for thow views and will be able to load the one third million of records returned by the views in to cache and can improve the application performance.
I have created the Global Temporary tables for 2 views with the option On Commit Preserve , But after am inserting the records into the Temp table and when i Issue the commit statement, the Temp table is getting Cleared.
I really got surpised of this behaviour as i know that with the Option On Commit Preserve , the rows should retain in the Temp Table, Instead , it's getting cleared.
Pelase suggest , what to do ??
Raj

How can I restore the sound on my ipad

How can I restore the sound on my ipad please?
I have know idea what happened to it but I am disabled
and rely on it so much because it is so easy to carry around.
Please advise me how to restore it. I miss listening to my music
so much.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

How can I improve the rate of success in Siri recognizing what I am sayin (rate of success nil, to date).

How can I improve the rate of success in Siri recognizing what I am saying (rate of success nil, to date)?

justjesper wrote:
Excelent question.
I have been searching around, and it looks like a lot of users is asking this question.
Where can I make Siri learn my accent ? Some users was talking about a feature where you could correct Siri so it would learn, but I have not been able to find it.
Nor have I, but it does seem to get better as I go along, so maybe it learns.

How can I improve the performace of this?

I have two tables - TableA and TableB. TableB is having 500,000,000 rows. I need to insert these rows, after some processing on them, into tableA. My insert statement is like this -
Insert into tableA
select A,B,C,...
from TableB
How can I improve the performace of this?
Here it will select 500,000,000 rows from TableB and store the result in cache and then start inserting.
Do I have any way so that the select statement starts releasing the records (and not wait upto 500,000,000 record ) and in parallel insert statement start inserting the records?

Shirish,
You need to insert more than 500 millions of rows in a table, right ?
But one point can be a problem, this is when you said "I need to insert these rows, after some processing on them". What does that means after some processing ?
Please give us more information about all your process, maybe the problem doesn't come from the insert itself ?
And why the APPEND hint cannot be an answer ?
And why create table cannot be an answer ?
What time did you expected for insert of these 500 millions of rows ?
Nicolas.

HT1338 how can I improve the speed of my Macbook? It's become incredibly slow...

how can I improve the speed of my Macbook? It's become incredibly slow...

Hi,
Troubleshooting Steps are... Restart... Reset... Restore from Backup... Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
http://support.apple.com/kb/HT1414
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
iPhone Syncing
http://www.apple.com/support/iphone/syncing/

How can i improve the battery life of my iphone 5s, it drains to fast and i don't know what to do?

how can i improve the battery life of my iphone 5s, it drains to fast and i don't know what to do?

http://www.apple.com/batteries/iphone.html
Take a look at this to make sure your settings are optimized to the best it can be.
If all else fails, try and restore through iTunes, set up as a new iPhone and manually sync your apps and media back to your iPhone.
If still persists after this, you might call Applecare and see if they can run a battery diagnogstics..

How can I improve the sound of my Qosmio F-25?

Similar Messages

Maybe you are looking for