How can I improve the terrible results from Type in Photoshop?

Hello all,
I have a blog on which I need to add type to each and every photos for copyright purposes.
The trouble is that the post photos are maxed out @ 144 dpi, and thus I use only sizes 6-8 for my fonts.
The reason for the small font size is proportion. I don't want to have giant fonts for small-sized photos.
I've attached a sample before rasterization and after illustraintg the use of this fiunction is next-to-useless.
I've tried different permutations and combinations font,font style, crisp,smooth, shar, etc, and the results are always the same - bad.
Either what I want can't be done, or I am doing something wrong.
Please keep the answers just to Photoshop, as I don't have Illustrator!
So all that vector-based to pixel-based discussion is irrelevant.
Thanks,
Stacey

Hi Noel,
I think Chris confirmed what I thought, which is that at a small-sized font at a low resolution,
I can't get a sharply-defined type.
In terms of answering your question, I find that the type is "soft" and lacks sharpness.
Therefore, I either go with a larger fornt size, and also perhaps a simpler font with less curves and edge surface.
In this way, the adjacent pixels next to the fonts won;t affect the lettering as much. e.g. a straight and vertical font.
Thanks,
Stacey

Similar Messages

How can I remove the Location column from the search results in a .chm file?

How can I remove the Location column from the search results in a .chm file?
I generated the file in Robohelp HTML 9.
As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
Can anyone tell me how I can remove it?
Thanks
Tom

In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

How Can we improve the report performance..?

Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.

First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

How can I improve the performace of this?

I have two tables - TableA and TableB. TableB is having 500,000,000 rows. I need to insert these rows, after some processing on them, into tableA. My insert statement is like this -
Insert into tableA
select A,B,C,...
from TableB
How can I improve the performace of this?
Here it will select 500,000,000 rows from TableB and store the result in cache and then start inserting.
Do I have any way so that the select statement starts releasing the records (and not wait upto 500,000,000 record ) and in parallel insert statement start inserting the records?

Shirish,
You need to insert more than 500 millions of rows in a table, right ?
But one point can be a problem, this is when you said "I need to insert these rows, after some processing on them". What does that means after some processing ?
Please give us more information about all your process, maybe the problem doesn't come from the insert itself ?
And why the APPEND hint cannot be an answer ?
And why create table cannot be an answer ?
What time did you expected for insert of these 500 millions of rows ?
Nicolas.

How can I Improve the Performance using Global Temo Tables ??

Hi,
Can anyone tell me , How can i make use of Global Temporary Tables to improve the Performance.
I have few sample scripts ,
Say i have the View based on some Complex query like ,
CREATE OR REPLACE VIEW Profile_values_view AS
SELECT d.Profile_option_name, d.Profile_option_id, Profile_option_value,
u.User_name, Level_id, Level_code
FROM Profile_definitions d, Profile_values v, Profile_users u
WHERE d.Profile_option_id = v.Profile_option_id
AND ((Level_code = 'USER' AND Level_id = U.User_id) OR
(Level_code = 'DEPARTMENT' AND Level_id = U.Department_id) OR
(Level_code = 'SITE'))
AND NOT EXISTS (SELECT 1 FROM PROFILE_VALUES P
WHERE P.PROFILE_OPTION_ID = V.PROFILE_OPTION_ID
AND ((Level_code = 'USER' AND
level_id = u.User_id) OR
(Level_code = 'DEPARTMENT' AND
level_id = u.Department_id) OR
(Level_code = 'SITE'))
AND INSTR('USERDEPARTMENTSITE', v.Level_code) >
INSTR('USERDEPARTMENTSITE', p.Level_code));
Now i have created the Global temp Table as ,
CREATE GLOBAL TEMPORARY TABLE Profile_values_temp
Profile_option_name VARCHAR(60) NOT NULL,
Profile_option_id NUMBER(4) NOT NULL,
Profile_option_value VARCHAR2(20) NOT NULL,
Level_code VARCHAR2(10) ,
Level_id NUMBER(4) ,
CONSTRAINT Profile_values_temp_pk
PRIMARY KEY (Profile_option_id)
) ON COMMIT PRESERVE ROWS ORGANIZATION INDEX;
Now I am Inserting the Records into Temp table as
INSERT INTO Profile_values_temp
(Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id)
SELECT Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id
FROM Profile_values_view;
COMMIT;
Now what my doubt is, when do i need to execute the Insert Statement.
Say , if the View returns few millions of records , then loading such a data into Global Temporary table takes lot of time.
Then what is the use of Global Temporary tables and how can i improve the Performance using the same.
Raj

Thanks for the responce ,
There are 2 to 3 complex views in our database, and there always be more than 5000+ users will be workinf on the application and is OLTP application. Those complex views are killing the application performance.
I what i felt was, if i create the Global Temporary tables for thow views and will be able to load the one third million of records returned by the views in to cache and can improve the application performance.
I have created the Global Temporary tables for 2 views with the option On Commit Preserve , But after am inserting the records into the Temp table and when i Issue the commit statement, the Temp table is getting Cleared.
I really got surpised of this behaviour as i know that with the Option On Commit Preserve , the rows should retain in the Temp Table, Instead , it's getting cleared.
Pelase suggest , what to do ??
Raj

How can I change the photo pixal from 1000 to 500?

how can I change the photo pixal from 1000 to 500?

File -> Export
In the resulting dialogue use the Size option to set the maxium dimension to 500 pixles.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can i improve the speed of my mac?

my mac has 667 MHz, how can i improve the speed?

Sorry if that sounded not very helpful, but basically it comes down to that. Not much can improve the performance of machine of that vintage, to stand up to a current model, unless you spend almost as much on upgrades (some of which to consider are listed below).
Some thought should be given to the budget (money and time and effort) one is willing to spend. The G4 Digital Audio is possibly a good candidate for upgrading for someone who is interested in do-it-yourself computer stuff and bargain hunting for parts. It can even be a fun hobby. But even max-ing out all possible upgrades will still be lacking in performance compared to the current Mac models, I don't actually have any specific benchmarks, just my gut feel. And you may spend a good portion of the cost of a new machine on all those parts for the old machine.
Is this the 667MHz machine (G4 Digital Audio) in question?
http://www.lowendmac.com/ppc/digital-audio-power-mac-g4.html
http://eshop.macsales.com/Descriptions/specs/Framework.cfm?page=g4da.html&title= Power%20Macintosh%20G4%20Digital%20Audio
or is it some other model?
Here are some CPU upgrades, for example:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=162&type=Processor&T I=2420&shoupgrds=Show+Upgrades
you can even get a small rebate for your original CPU
http://eshop.macsales.com/Service/rebate-program/
Any of those CPUs should double your processing speed, but you may also need more RAM...or the CPU will just be waiting for data to be read from the virtual memory on the hard drive.
http://eshop.macsales.com/item/Other%20World%20Computing/133SD512328/
you could max it out with a whopping 1.5 GB, with 3 of these.
and you may need a better video card...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=162&type=Video&TI=29 34&shoupgrds=Show+Upgrades
To add larger and faster hard drives than the original Ultra ATA/66 can handle you would need a PCI ATA133 or PCI SATA card...
http://eshop.macsales.com/item/ACARD/AEC6280MOB/
http://eshop.macsales.com/item/Sonnet%20Technology/TSATA/
And if you need to install OS X from a DVD, and want to burn your own DVD, you may need a new optical drive, if one hasn't been installed already, to replace the CD-RW:
http://eshop.macsales.com/MyOWC/Upgrades.cfm?Model=162&Type=InternalOpticalDrives&sort=pop
Also, check out the Power Macintosh G4 forums if you have any questions about that particular model, (if I guessed correctly)
http://discussions.apple.com/category.jspa?categoryID=113
Even while I am trying to build a case to convince someone not to waste their money on this project, I am thinking to myself, where can I pick up one of these G4 towers to take on this project myself. Maybe a Quicksilver, no a FW400 MDD dual-boot for sure, I still have some OS 9 software. I did about all I can with my G3 Desktop, and spent more than my MacBook cost.

HT1338 how can I improve the speed of my Macbook? It's become incredibly slow...

how can I improve the speed of my Macbook? It's become incredibly slow...

Hi,
Troubleshooting Steps are... Restart... Reset... Restore from Backup... Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
http://support.apple.com/kb/HT1414
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
iPhone Syncing
http://www.apple.com/support/iphone/syncing/

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can i get the max rpm from cpu fan??

how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ?? please make things clear for me
thanks

if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
need more air get a different cooler/fan

How can I get the edited pictures from the thumbnails to full size?

I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture. How can I get the edited pictures from the thumbnails to full size?

Verify you are using iPhoto11 ver 9.5
if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched, not an older ver.

How can I get the XML structure from a flat structure?

Hi all,
in my XI SP 12 I use a JMS adapter to read information using the WebSphereMQ transport protocol.
The structure that I receive have this format:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value>
<NumberRecordType_B><NumberRecordType_c>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
the problem is that in this structure each line is not separated by a carriage return or a comma, I have all the information in a single line:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value><NumberRecordType_B><NumberRecordType_c><Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>...<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value><Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>...<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
and the customer don't want to insert a line separator.
Then, the question is:
How can I get the XML structure from this structure?
If possible, I don't want to develop new Module and add it in the JMS Module Sequence.
PS I have already read the article "How to Use the Content Conversion Module with the XI 3 J2EE JMS Adapter.pdf" and it doesn't seem to help me.
Best Regards,
Paolo

To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
ServletContext context = getServlet().getServletContext();
String tempContextVar =
context.getInitParameter("<your context param >");

How can I improve the terrible results from Type in Photoshop?

Similar Messages

Maybe you are looking for