How can I include a Labview graph in a TestStand report?

Hi All,
I have a new need that I have never done before in TestStand. I have a Labview VI in which I am sending results to a graph.. I would like to include that graph in the TestStand report. I have searched the help and the forums and have come up empty. Any ideas out there as to how to accomplish this? Thanks in advance for any help.
Troy
Solved!
Go to Solution.

Raj - Thanks for the response and that solution does work. The problem is that the graphs that I am including are more elaborate than what TestStand is doing by default. Some of the graphs will have three traces on them to show spectral masks test with lower and upper limits. These graphs will also be used in reports and I would like them to show up larger, kind of like when you have a graph in Labview and you can use its reference to save it to an HTML report.
Troy

Similar Messages

How can I include different DAQ cards (for notebook and PC) in one application?

I want to build one application, which runs on different computers. On PC a DAQ board PCI-6052E and LabVIEW including application builder are installed and work. My program runs.
Now I want to build an application, which runs on the notebook without LabVIEW but with the similar DQACard-AI-16XE-50, too.
How I have to install the DAQCard on the notebook and how can I include the driver?

Sylke,
Check the following link which guides you step by step to install the driver and configure the daq board:
http://www.ni.com/support/install/
Hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

How can I make a waveform graph store the entire wave, not just the current time period and how can I save the actual graph?

I am taking temp readings with a 4 channel DAQ, sending them to a waveform graph and exporting the data to excel, how do I manipulate the graph to take a continuous reading as opposed to losing the previous GUI and how can I save the entire graph?
Using LabVIEW 2011 operating on Windows 7 professional.

That is the nature of the chart -- everything not in the history is lost (it is a FIFO buffer of length=1024 samples by default).
The scroll bar is probably grayed out because you're show all of the data.
Attached is a program that will add 5 random points to a graph and prompt you for a file location where to save a JPG snapshot of the graph. It's not particularly good programming style, but it has all of the elements/concepts you're after.
Attachments:
graph.vi ‏14 KB

How can I include my business email fonts on the ipad signature?

How can I include my business email fonts on the ipad signature?

It's a lot easier with Photo Manager Pro.
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

I have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

i have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

How can I include a carriage return in a expression

How can I include a carriage return in a expression between text strings eg
Expression 1 = Text1 & text2 & text3 & text4
I need to display it as below
Text1
Text2
Text3
Text4
adjusting the box the size doesn’t work as the text strings are variable lengths

Message Edited by Ryan.S on 01-04-2007 08:17 PM
Ryan Shi
National Instruments
Attachments:
untitled.JPG ‏37 KB

How can I include results of a subsequence, which runs in a new thread, in the main sequence test report

Hi!
I', m working with TestStand Version 4.2.1. I have a main sequence, which calkls different subsequences. All these steps are properly reported. One of subsequences runs as "new thread". How can I include its results in common test report of the main sequence?
I have markes variables of the subsequence as it is requred for test report (it works OK if it is not a new thread). If the the numerical test, which is executed in this subsequence is correct, I get no results at all. If the numeric test failed I get somewhere in the main sequence report a "red message", that test failed whithout any reference to the step or values of vaiables which were not correct.
I tried an option "On the fly" in the Report Configuration , but haven' got any useful results. What shall I do?
Best regards
Solved!
Go to Solution.

Hi,
I tried it but without success:
1) I got a reference to the Thread as "Locals.Step1=RunState.Thread" for every of 2 steps which start a thread
2) I put both "Waits" after steps with (and without) threads, at the same place, where they were before
3) The sequence run OK, but when it came to Wait for Thread 1 it waited for ever, I had to terminate sequence
Does it mean, that I got a false reference (suppose No - please, have a look at attached pic)?
Or does it mean, that Waits are badly placed in the sequence (threads are already terminated)? Here is a pic of sequeces calls with Wait after them.
Regards
Attachments:
Thread.JPG ‏34 KB
SequenceCall.JPG ‏32 KB

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Smartforms: how can I include a jpg picture stored an a web server ?

I want do include a business graphic (JPG) in a smartforms window. The picture is created by a web serves and stored on a web server.
the jpg-picture can be loaded on by an http-adress.
How can I include the picture in the smartforms form ?
thanks
Richard

hi,
use transction SE78 to upload the picture .
Then use it in smartforms.
regards,
guru

How can I include merged projects in the printed documentation?

I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project.
Is there any setting or fix that enables print also of merged projects and topics when I create printed documentation?
Pretty please with sugar on top :-)

Hm - there is a contract with the customer, saying that he wants documentation both as word and pdf, and as we now aim at only writing online documentation, these tasks create extra work, as we are delivering updates each month
But yes - two beasts, where only chm is actually needed we think.
-Tone
Date: Tue, 3 May 2011 06:53:04 -0600
From: [email protected]
To: [email protected]
Subject: How can I include merged projects in the printed documentation?
Hi there
I'm a bit curious as to the reasoning behind your "persuation process for using chm-files only".
CHM files and printed documentation are two entirely different beasts.
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
>

How can I include a portal component look and feel in a java servlet

Does any body know how can i include a portal component look and feel (tables, buttons, etc) in a java servlet?

Hi José,
I don't think that is possible. But you can import the css files that ep uses for its look and feel and try to give your web pages similar look and feel. The tables and other controls used in EP are totally different and are done through complex JavaScript coding instead of simple HTML tags. If you want exact lok and feel then i thin you must go for a Webdynpro based application rather then a J2EE application with JSPs.
Regards,
Guru.
PS: Give points for helpful replies.

How can i include a sampling of type in ps7 type tool?

how can i include a sampling of type in ps7 type tool? i did this in ps3

I guess in my zest to answer your question i had forgotton about Adobe Type Reunion.
What operating system are you using photoshop 7 on?
photoshop 3.05 on mac os 7.6.1

How can i include a vi to help me save all the measurement from 10 to 100000

hi, how can i include a vi that will store my data or save them for each of the step increament , from the starting measurment 10hz to 10000000hz to the last. pls help
good
Attachments:
saving vi.vi ‏53 KB

Hi ifyo,
I couldn't run your VI as i dont have all the components of it. But i have attached herewith a vi which will show you how to save continuously acquired data into a text file. The explanations are added on the block digaram. Let me know if this doesn't help and you need more information.
Regards,
Nitzz
(Give Kudos to good Answers, Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi ‏9 KB

How can i include Services and Bindung in a generated WSDL file?

Hi,
i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java).
I noticed, that services an bindings are missing, also a policy is included.
How can i include services and bindings in the wsdl and exclude the policy?
Thanks!

well, I assume you have SOAMANAGER.
choose your service & "Apply Selection" (very useless button btw)
select a binding in the dropdown box or create on if you do not have one yet
Click button "Show WSDL options" (actually they do not really look like buttons in WD; call it yellow blot)
Some extra config area is thrown onto your screen (without any sense for usability or design); Change the radio button for WSDL format from "WS policy" to "Standard"; make sure the first radio button group is on "True" for monolithic
Now click the link (why is this a link and no blot?) called "Display selected bindings WSDL URL"
an extra text field is again thrown onto your screen somwhere between the dropdown and the WSDL option config area containing an URL (get out your glasses if you don't see the sub-10pt-letters)
hope it helps,
anton

How can I include 3rd party jar files with my custom extention?

I'm writing an extension that is dependent upon some 3rd party jars. How can I include/package these with my extension?
we're using the 11g tech preview
thanks,
Dylan

Do you mean that you need these files to appear in JDeveloper as a library available for the developers who build a project and use your extension?
You can create a library in JDeveloper with JAR files by simply adding the following to your extension.xml file:
<jdeveloper-hook xmlns="http://xmlns.oracle.com/jdeveloper/1013/extension">
- <libraries xmlns="http://xmlns.oracle.com/jdeveloper/1013/jdev-libraries">
<library name="My Extension Library">
<classpath> ${ide.extension.install.home}/lib/some.jar</classpath>
</library>
</jdeveloper-hook>

How can I include a Labview graph in a TestStand report?

Similar Messages

Maybe you are looking for