How can I include telephone numbers when printing address labels using Dymo Labelwriter Turbo 330?

I am able to pull info from Apple Address Book using the Dymo Labelwriter application, but I cannot seem to include telephone numbers. Does anyone know how to do this?

short answer
1 - NO
2 - It is up to apple to correct the issue and I have heard they will look at it. It doesn't hurt to call customer support both apple and dymo to let them know you are unhappy about this [it used to work fine in later versions of 10.3]. Also don't let them convince you that you must have installed the driver wrong or something. I have had the same problem on 3 different macs [one of which was brand new] with 2 different dymo label printers.

Similar Messages

  • Use Numbers to print Address Labels

    I know Excel allows you to export a spreadsheet to print labels with, but being a die-hard Apple guy, there's no way I'm going to fork over that much money for a M$ product when I have a perfectly good spreadsheet app right here.
    Does anyone know of a way to use a Numbers spreadsheet to print address labels? I have a list of names and addresses that I want to print on some postcards but I can't seem to find an option to do that.
    Thanks

    If I took time to build a script to do the trick it's because I undersatand that some users wish to be able to print labels from an other source than AddressBook.
    But, given that, it's not because some users wish to have this feature available that the fact that it isn't is "inacceptable". Remember what is written in Apple Human Interface Guide.
    +-+-+-+-+-+-+-+-+
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution—that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    -+-+-+-+-+-+-+-
    It just seems that you doesn't fit in the 80%. Is it serious doctor ?
    Yvan KOENIG (from FRANCE mardi 9 septembre 2008 21:03:56)

  • Printing address label using Print Shop 2 program

    Hello, I have a iMac ox 10.6.8 and have been printing address labels.  The problem is the image and address do not align "CENTERED" when printing. The image/address are either Higher on the label or lower on the label. There not an even border within the label.   Got any ideas as how I can fix this?
    Darryl (Personal information removed)

    Hi @Macdog64,
    Welcome to the HP Forums!
    I understand that the image and address do not align "CENTERED" when printing on Avery Labels 8160 when using your HP Deskjet 6540. I am happy to help you with this printing issue!
    Please see this guide, Formatting & Printing Tips, through the Avery website.
    Otherwise, I would recommend contacting Avery Support. Help Center | Avery, as they may have some different software/drivers that you can use.
    Best of luck!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How can I eliminate blank responses when printing the submited form?

      I am using a lot of skip logic on an employment application.  When printing the application out, I have many pages that don't need to be there.  I get the same thing on the email notice I receive, even though I have the checkbox marked not to include blank responses.
    Thanks for you help.
    Jay

    Hi Jay;
    When you say you are printing out the submitted from, are you using the "Download Response as PDF"?  There isn't any way to hide unanswered questions in the PDF.  I was trying to think if you could export responses as Excel and hide the unanswered columns but since those would be different per responder that would not work.  I am not sure of a way to do this at the moment, if I come up with something I will respond again.
    Regarding the emails, there is not an option to hide blank responses in the "Email Notifications" (that goes to you, the author).  There is an option in the "Email Receipts" for the "Email Submission Reciept" that goes to the person who submitted the form (assuming they enter their email into an email field you selected), in there is an option to include empty fields (ommited by default).
    You may want to add a feature request to the ideas page for the "Email Notification" to have an option to exclude blank responses, you can do that here by clicking "Create an idea" in the upper right:  http://forums.adobe.com/community/formscentral?view=idea
    Thanks,
    Josh

  • How can I regain Preview funtion when printing using FF 28.0 ?

    I am running Mac os 10.9.2 and FF 28.0. When printing on an Epson WF 545 I no longer get the "Preview" option in the print windows. How do I regain that function?

    There is no "Print Preview" in the File drop down menu and I don't get any menu from the FF logo. When I click on "Print" from the File menu, the window that comes up shows "Show Details" or "Hide Details" where it should say "Preview".

  • How can I send an imessage when the conversation is using jabber

    I have a conversation going with a friend which started on iMessage, then transferred to jabber (google talk).
    - He's now offline, so I want to send an imessage in the existing conversation.
    - If I send anything it attempts to use jabber.
    - I already have a second conversation going as the only way I could see around this last time was to create a new imessage conversation.
    - The contact drop down only has jabber as an option for the user.
    How can I do this?!

    I have a conversation going with a friend which started on iMessage, then transferred to jabber (google talk).
    - He's now offline, so I want to send an imessage in the existing conversation.
    - If I send anything it attempts to use jabber.
    - I already have a second conversation going as the only way I could see around this last time was to create a new imessage conversation.
    - The contact drop down only has jabber as an option for the user.
    How can I do this?!

  • How can I remove vertical lines when printing from Aperture 3.2.2 to Epson Stylus Photo RX690?

    I have been generally quite happy with my access to and use of Aperture 3.2.2 (recently purchased) for import and manipulation of photos and movies, etc.I am using Aperture on a MacBook Pro OSX 10.6.8.
    However I have been unable to print high quality images on Epson premium glossy, glossy or matt paper on my Epson Stylus Photo RX690.
    High quality prints on screen show perfectly in preview, but all prints come out with good and accurate colours, but a series of vertical lines or bands of lines across the photo print.
    Using the Aperture Manual I have checked my settings in Aperture for the printer, for colour and quality of paper etc and they all seem to be correct.
    The Epson Printer is networked with a Toshiba (Vista) laptop which prints perfect results from Picasa and Photoshop with fine colour and no markings.
    I would appreciate any help please.
    Cam Opie

    Thank you Mark
    I thought I had done all the settings .....but no.
    I now have perfect prints. Easy when you know how!!!
    Cheers
    Cam

  • How can page margins be changed when printing from Firefox for Mac OS X? (This is easy to do on the Windows version.)

    Page margins can be adjusted from the page setup menu in the Windows version of Firefox, but there does not appear to be an equivalent menu in the Mac version.

    Hi onlyhuman2-
    I'm not familiar with the printing options using Windows. I've found this article on editing print options for a Mac: [[Printing a web page]]
    That shows you how to shrink the page, and to edit page headers and footers. I'm hoping that covers the margins you were hoping to change.
    Good luck!

  • How can page margins be changed when printing from Firefox for Mac OS X?

    This has been asked in the past with the thread closed even though the asker got no answer. I have the same problem so I am asking again....
    How does one set the margin sizes on Firefox on the Mac?

    Did not notice that you are using a Mac, otherwise, I would not have replied.
    <s>It appears that page margins for OSX are set at the operating system level.</s>
    Does this help? - http://www.mintprintables.com/print-tips/adjust-margins-osx/

  • How do I print address labels using Pages 09 on MacBook Pro?

    I need to do a full page of Avery J8163 labels with the same address printed on each label on the sheet and can't work out on Pages 09 how to do it.
    Can some kind person please tell me how to do it.  Please be gentle with me as I am new to the ways of Mac having always used a PC before.
    Thank you

    I would try asking the users in the Pages forum.  Good luck.

  • HT2486 How can I send an email to all of the email addresses associated with one contact? Similarly, in regard to group lists, how do you include for distribution all email addresses associated with each contact in the group?

    Often times there are multiple email addresses associated with a single contact in address book.  How can I included all of these email addresses when creating an address book group?

    Don't be surprised.
    Apple offers free, basic Mail and Address Book apps and creates paid, more sophisticated solutions, also allowing Developers to provide more sophisticated solutions for sale in the marketplace.
    When I need to repeatedly email to multiple contacts, I create a blank draft email, and use the Address Book button to list the appropriate address book group. With the Address Book window open, it's easy to click to add multiple email addresses for a single contact name. Each is added to the message email address list. Then I save that blank email to iCloud Drafts, and it retains the email addreses I've entered. Next time I need to send a message I double-click on it in Drafts to open it, and drag it to one of my other email accounts to add Subject and details, then send from the other account.
    Message was edited by: kostby

  • How can I lock in numbers for use in a spreadsheet ap?

    How can I lock in numbers on my Ipad for use in a spreadsheet?

    There is a forum that deals exclusively with "Numbers" discussions:
    https://discussions.apple.com/community/iwork/numbers?view=discussions

  • Printing sapscript label using zebra printer

    Hi,
    Can anybody please help me regarding "printing sapscript label using zebra printer"?
    i hav set the following print default settings in the transaction mb90:
    output device :
    NO01
    device type: YZZX_ZEB
    but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
    i hav also attached my print program for ur easy reference.
    ====================================================================*
    FORM open_form_slv.
    *'  Description:
    *'  Add information for the SAP spooler
    *'  Change the name of the standard customized form for Zebra print
    *'  Last Change Vers Programmer   Reason
    *1
      DATA: BEGIN OF print_infos.
              INCLUDE STRUCTURE itcpo.
      DATA: END OF print_infos.
      DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
      PERFORM itcpo_fuellen.
      MOVE-CORRESPONDING itcpo TO print_infos.
      WRITE sy-datum USING EDIT MASK '__.__.____'
                                               TO print_infos-tdcovtitle+1.
      WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                              TO print_infos-tdcovtitle+12.
      CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                           mseg-mblnr print_infos-tdcovtitle
                              INTO print_infos-tdcovtitle SEPARATED BY space.
    form name from the table YZZM_GR_LABEL
      IF NOT g_fonam IS INITIAL.
        tnapr-fonam = g_fonam.
      ENDIF.
    if the used printer is a Zebra label printer, then the customized
    layout set name ???_???_XXX will be changed to ???_???_ZP
      SELECT SINGLE * FROM  tsp03d WHERE  padest  = nast-ldest.
      IF tsp03d-patype = 'YZZX_ZEB'.
        ind_beg := 15.
        WHILE ind_beg > -1.
          char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
          IF char1 = '_'.
            form_name := tnapr-fonam(ind_beg).
            CONCATENATE form_name '_ZP' INTO tnapr-fonam.
            EXIT.
          ENDIF.
          ind_beg := ind_beg - 1.
        ENDWHILE.
      ENDIF.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          language = language
          OPTIONS  = print_infos
          form     = tnapr-fonam
          dialog   = ' '.
      x_open := x.
      IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
      IF syst-tcode <> 'MB90'  AND  NOT g_flag_popup IS INITIAL.
    check for requirement of printing label and ask for gr-quantities (popup)
        SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
        CLEAR yzzm_gr_quantity-no_popup.
      ELSE.
    and ask not for gr-quantities
        IF syst-tcode = 'MB90'.
          yzzm_gr_quantity-erfmg := mseg-menge.
        ELSE.
          yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
        ENDIF.
        yzzm_gr_quantity-no_popup := x.
      ENDIF.
    determination inspection lot number
      CLEAR qals-prueflos.
      SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                           AND zeile = mseg-zeile
                           AND mjahr = mseg-mjahr.
    determination vendor batch
      CLEAR mch1-licha.
      SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                            AND charg = mseg-charg.
    ENDFORM.                    "open_form_label
    =================================================================== *
    FORM we01_print_slv.
    *'  Description:
    *'  print out of hazardous symbol
    *'  controls the Zebra printer
    *'  Last Change Vers Programmer   Reason
    *****26.09.2007 Starts
      DATA: l_objky TYPE nast-objky,"Object key
            l_vstat TYPE nast-vstat. "Processing status of message
    *****26.09.2007 Starts
      TABLES: mgef, t300.
      FIELD-SYMBOLS: .
      DATA: aux_index LIKE sy-index.
      DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
      DATA: aux_value(5) TYPE c.
      DATA: txt(10) TYPE c, pos(5) TYPE c.
      t001w-werks = r_werks.
      t001w-name1 = r_name1.
      PERFORM read_address.
    *2
      SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                                  AND ebelp = mseg-ebelp.
      CLEAR mara-stoff.
      SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
      IF NOT mara-stoff IS INITIAL.
        CLEAR t300.
        SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
        IF NOT sy-subrc IS INITIAL.
      for plants without warehouses try to use the country code
          CASE mseg-werks.
            WHEN 'BUP'.
              t300-regkz := 'US '.
          ENDCASE.
        ENDIF.
        CLEAR mgef.
        SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                                  AND   regkz = t300-regkz.
      ENDIF.
    in case of more then one label, use for each a new output window
    (not only for the first)
      IF g_count > 1.
        CALL FUNCTION 'CONTROL_FORM'
          EXPORTING
            command = 'NEW-WINDOW'.
      ENDIF.
    Ausgabe Gefahrstoffsysmbole        Neustadt,  V.Hilgert  14.07.98
    *For output type YNL7, the hazardous warning symbol has to be printed at  the bottom of the label.So label is called before that.
      IF tnapr-kschl = 'YNL7'.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'LABEL'.
      ENDIF.
      count_haz_sym = 0. position = 0.
      WHILE count_haz_sym  = 'XN'.
    For output type YNL7, the width of the standard text is small.
          IF tnapr-kschl = 'YNL7'.
            zw = position * '0.2' + '0.1'. pos = zw.
          ELSE.
            zw = position * '1.3' + '0.1'. pos = zw.
          ENDIF.
          IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
            aux_value := count_haz_sym.
          ELSE.
            aux_value := pos.              " HP/Kyocera or other laser printer
          ENDIF.
          CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
            EXPORTING
              name   = '&XPOS&'
              value  = aux_value
            EXCEPTIONS
              OTHERS = 1.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              element   =
              window    = 'MAIN'
            EXCEPTIONS
              element   = 1
              function  = 2
              type      = 3
              unopened  = 4
              unstarted = 5
              window    = 6
              OTHERS    = 7.
          IF sy-subrc = 0.
    *Varying the position for YNL7
            IF tnapr-kschl = 'YNL7'.
              position = position + 2.
            ELSE.
              position = position + 1.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDWHILE.
      IF NOT mseg-vfdat IS INITIAL.
        am07m-mhtxt = text-105.
      ENDIF.
      IF NOT am07m-mhdat IS INITIAL.
        am07m-mhztx = text-106.
      ENDIF.
      IF ekko-bsart = 'UB'.
        am07m-litxt = text-101.
        am07m-libzg = ekko-reswk.
      ELSE.
        am07m-litxt = text-100.
        am07m-libzg = ekko-lifnr.
      ENDIF.
      belpos-mblnr = mkpf-mblnr.
      belpos-zeile = mseg-zeile.
      CONDENSE belpos NO-GAPS.
      am07m-belpos = belpos.
      IF t156-shkzg = h.
        am07m-hdlne = text-020.
      ELSE.
        am07m-hdlne = text-010.
      ENDIF.
    Ausgabe der Etiketten mit den ind. Mengen
      IF NOT g_flag_popup IS INITIAL.
        SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                              AND   weanz = g_count.
      ELSE.
    * print the number of labels is handeled by the Zebra printer
    IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
    g_lbls_tot := mseg-weanz - g_count + 1.
    g_break_print := x.
    ENDIF.
    ENDIF.
    mseg-erfmg := yzzm_gr_quantity-erfmg.*
    ********26.09.2007 Starts
    CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
    SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
    objky = l_objky AND
    kschl = 'YNL7'.
    ********26.09.2007 Ends
    CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
    EXPORTING
    name = '&nummer&'
    value = g_count.
    IF tnapr-kschl <> 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    element = 'LABEL'.
    else.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT = 'BAR_CODE'
    EXCEPTIONS
    ELEMENT = 1
    FUNCTION = 2
    TYPE = 3
    UNOPENED = 4
    UNSTARTED = 5
    WINDOW = 6
    BAD_PAGEFORMAT_FOR_PRINT = 7
    SPOOL_ERROR = 8
    CODEPAGE = 9
    OTHERS = 10.
    IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
      ENDIF.
    ENDFORM.                    "GR_label_print
    *&      Form  lesen
          text
         -->OBJKY      text
    FORM lesen USING objky.
      nast_key = objky.
      CLEAR retco.
      SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                                AND   mjahr = nast_key-mjahr.
      SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                                AND   zeile = nast_key-zeile
                                AND   mjahr = mkpf-mjahr.
      IF sy-subrc NE 0.
        retco = sy-subrc.
        EXIT.
      ENDIF.
      PERFORM tab156_lesen.
      xskkz = t156-rstyp.
      PERFORM tab001w_lesen.
      IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
        PERFORM t027_lesen.
      ENDIF.
      PERFORM bestellung_lesen.
      IF NOT ekpo-knttp IS INITIAL AND NOT
             ekpo-weunb IS INITIAL.
        PERFORM kontierung_lesen.           "für multikontierte Bestellungen
      ENDIF.
      IF NOT mseg-ematn IS INITIAL.
        PERFORM lesen_htn.
      ELSE.                                                     "111277/PH
        CLEAR am07m-mfrpn.                                      "111277/PH
      ENDIF.
      IF mseg-matnr IS INITIAL.
        mseg-menge = mseg-bpmng.
        mseg-meins = mseg-bprme.
        PERFORM bestelltext_lesen.
        CLEAR mabdr.
      ELSE.
        PERFORM material_lesen.
      ENDIF.
      PERFORM tab024_lesen.
      PERFORM t064b_lesen.
      PERFORM ladr_lesen.
    ENDFORM.                    "lesen
    Lesen für WE-Schein Fert.Auftrag -
    FORM lesen_wf USING objky.
      nast_key = objky.
      CLEAR retco.
      SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                                AND   mjahr = nast_key-mjahr.
      SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                                AND   zeile = nast_key-zeile
                                AND   mjahr = mkpf-mjahr.
      IF sy-subrc NE 0.
        retco = sy-subrc.
        EXIT.
      ENDIF.
      PERFORM tab156_lesen.
      xskkz = t156-rstyp.
      PERFORM tab001w_lesen.
      PERFORM auftrag_lesen.
      IF NOT mseg-matnr IS INITIAL.
        PERFORM material_lesen.
      ELSE.
        mseg-menge = mseg-erfmg.
        mseg-meins = mseg-erfme.
      ENDIF.
      PERFORM tab024d_lesen.
      PERFORM t064b_lesen.
      PERFORM ladr_lesen.
    ENDFORM.                    "lesen_wf
    Lesen für Warenausgang -
    FORM lesen_wa USING objky.
      nast_key = objky.
      CLEAR retco.
      SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                                AND   mjahr = nast_key-mjahr.
      SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                                AND   zeile = nast_key-zeile
                                AND   mjahr = mkpf-mjahr.
      IF sy-subrc NE 0.
        retco = sy-subrc.
        EXIT.
      ENDIF.
      PERFORM tab156_lesen.
      xskkz = t156-rstyp.
      PERFORM tab001w_lesen.
      IF NOT mseg-matnr IS INITIAL.
        PERFORM material_lesen.
      ENDIF.
      PERFORM ladr_lesen.
    ENDFORM.                    "lesen_wa
    Druck Vorbereiten -
    FORM open_form.
      PERFORM itcpo_fuellen.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          language = language
          OPTIONS  = itcpo
          dialog   = ' '.
      PERFORM lesen_t159p.
      x_open = x.
    ENDFORM.                    "open_form
    Druck Vorbereiten Sammelscheine -
    FORM open_form_sammel.
      PERFORM lesen_t159p.
      PERFORM itcpo_fuellen.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          language = language
          OPTIONS  = itcpo
          form     = tnapr-fonam
          dialog   = ' '.
      x_open = x.
    ENDFORM.                    "open_form_sammel
    Druck schließen -
    FORM close_form.
      CHECK NOT x_open IS INITIAL.
      CALL FUNCTION 'CLOSE_FORM'.
      CLEAR x_open.
    ENDFORM.                    "close_form
    Hilfsfelder versorgen für Sammelscheindruck -
    FORM helpdata1.
       *mkpf = mkpf.
       *mseg-lgort = mseg-lgort.
       *ladr = ladr.
      save_mkpf = *mkpf-usnam.
      save_mblnr = *mkpf-mblnr.
      save_budat = *mkpf-budat.
      save_cpudt = *mkpf-cpudt.
      save_ematn = *mseg-ematn.
      save_lgort = *mseg-lgort.
      save_ladr = *ladr.
       *t001w = t001w.
      save_werks = *t001w-werks.
      save_name1 = *t001w-name1.
       *ekko = ekko.
       *am07m = am07m.
      save_lifnr = *ekko-lifnr.
      save_ebeln = *ekko-ebeln.
      save_ekgrp = *ekko-ekgrp.
      save_linam = *am07m-name1.
      save_lina2 = *am07m-name2.
       *t024 = t024.
      save_eknam = *t024-eknam.
      save_ektel = *t024-ektel.
       *mkpf-usnam = old_mkpf.
       *mkpf-mblnr = old_mblnr.
       *mkpf-cpudt = old_cpudt.
       *mkpf-budat = old_budat.
       *mseg-ematn = old_ematn.
       *mseg-lgort = old_lgort.
       *ladr = old_ladr.
       *t001w-werks = old_werks.
       *t001w-name1 = old_name1.
       *t024-eknam = old_eknam.
       *t024-ektel = old_ektel.
       *ekko-lifnr = old_lifnr.
       *ekko-ebeln = old_ebeln.
       *ekko-ekgrp = old_ekgrp.
       *am07m-name1 = old_linam.
       *am07m-name2 = old_lina2.
      save_lfa1  = lfa1.
      IF NOT old_lfa1 IS INITIAL.
        lfa1  = old_lfa1.
      ENDIF.
    ENDFORM.                                                    "helpdata1
    --- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
    FORM helpdata2.
      old_lfa1 = save_lfa1.
      lfa1     = save_lfa1.
      old_mkpf = save_mkpf.
      old_lgort = save_lgort.
      old_ladr = save_ladr.
      old_budat = save_budat.
      old_cpudt = save_cpudt.
      old_werks = save_werks.
      old_name1 = save_name1.
      old_mblnr = save_mblnr.
      old_lifnr = save_lifnr.
      old_linam = save_linam.
      old_lina2 = save_lina2.
      old_ebeln = save_ebeln.
      old_ekgrp = save_ekgrp.
      old_eknam = save_eknam.
      old_ektel = save_ektel.
      old_ematn = save_ematn.
       *mkpf-usnam = save_mkpf.
       *mkpf-mblnr = save_mblnr.
       *mkpf-budat = save_budat.
       *mkpf-cpudt = save_cpudt.
       *mseg-ematn = save_ematn.
       *mseg-lgort = save_lgort.
       *ladr = save_ladr.
       *t001w-werks = save_werks.
       *t001w-name1 = save_name1.
       *t024-eknam  = save_eknam.
       *t024-ektel  = save_ektel.
       *ekko-lifnr  = save_lifnr.
       *ekko-ebeln  = save_ebeln.
       *ekko-ekgrp  = save_ekgrp.
       *am07m-name1 = save_linam.
       *am07m-name2 = save_lina2.
    ENDFORM.                                                    "helpdata2
    Form Lesen Warenausgang Lohnbearbeiter -
    FORM lesen_wlb USING objky.
      nast_key = objky.
      CLEAR retco.
      SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                                AND   mjahr = nast_key-mjahr.
      SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                                AND   zeile = nast_key-zeile
                                AND   mjahr = mkpf-mjahr.
      IF sy-subrc NE 0.
        retco = sy-subrc.
        EXIT.
      ENDIF.
      PERFORM tab156_lesen.
      xskkz = t156-rstyp.
      PERFORM tab001w_lesen.
      IF NOT mseg-matnr IS INITIAL.
        PERFORM material_lesen.
      ENDIF.
      ON CHANGE OF mseg-lifnr.
        PERFORM read_address.
      ENDON.
    ENDFORM.                    "lesen_wlb
    *eject
    Fuellen der ITCPO -
    FORM itcpo_fuellen.
      IF xscreen NE space.
    *- Testausgabe auf Bildschirm -
        itcpo-tdpreview = 'X'.
        itcpo-tdnoprint = 'X'.
      ELSE.
        CLEAR: itcpo-tdpreview,
               itcpo-tdnoprint.
      ENDIF.
      MOVE-CORRESPONDING nast TO itcpo.
      itcpo-tdcover   = nast-tdocover.
      itcpo-tddest    = nast-ldest.
      itcpo-tddataset = nast-dsnam.
      itcpo-tdsuffix1 = nast-dsuf1.
      itcpo-tdsuffix2 = nast-dsuf2.
      itcpo-tdimmed   = nast-dimme.
      itcpo-tddelete  = nast-delet.
      itcpo-tdcopies  = nast-anzal.
      itcpo-tdprogram = sy-repid.
    ITCPO-TDTELELAND = US_COUNTRY.
      itcpo-tdsenddate = nast-vsdat.
      itcpo-tdsendtime = nast-vsura.
      itcpo-tdnewid   = x.
    ENDFORM.                    "itcpo_fuellen
    *eject.
    ------------ FORM lesen der Lagerortadr. ---------------------------*
    FORM ladr_lesen.
      DATA:    BEGIN OF addr_sel.
              INCLUDE STRUCTURE addr1_sel.
      DATA:    END OF addr_sel.
      CLEAR ladr.
      SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                           AND  lgort = mseg-lgort
                           AND  lfdnr = '001'.
      IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
        MOVE twlad-adrnr TO addr_sel-addrnumber.
      ENDIF.
      CALL FUNCTION 'ADDR_GET'
        EXPORTING
          address_selection = addr_sel
        IMPORTING
          sadr              = ladr
        EXCEPTIONS
          OTHERS            = 1.
    ENDFORM.                    "ladr_lesen
    **&      Form  REPRINT
          text
    *FORM reprint.
    TABLES : nase.
    DATA  : x TYPE string.
    IF nase-vermo = 2.
       x = 'REPRINT'.
    ENDIF.
    *ENDFORM.                    "REPRINT
    Kindly do the needful.
    Thanks in advance
    Regards
    Swarna

    Hi Swarna,
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    device = 'PRINTER'
    language = language
    OPTIONS = print_infos
    <b>form = tnapr-fonam</b>
    dialog = ' '.
    x_open := x.
    I thing its not a good way to pass the Form name to the Parameter.
    Try like,
    data : temp_form like tnapr-fonam.
    <b>form = temp_form</b>
    Thanks.

  • How can I include merged projects in the printed documentation?

    I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project.
    Is there any setting or fix that enables print also of merged projects and topics when I create printed documentation?
    Pretty please with sugar on top :-)

    Hm - there is a contract with the customer, saying that he wants documentation both as word and pdf, and as we now aim at only writing online documentation, these tasks create extra work, as we are delivering updates each month
    But yes - two beasts, where only chm is actually needed we think.
    -Tone
    Date: Tue, 3 May 2011 06:53:04 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I include merged projects in the printed documentation?
    Hi there
    I'm a bit curious as to the reasoning behind your "persuation process for using chm-files only".
    CHM files and printed documentation are two entirely different beasts.
    Cheers... Rick
    | http://www.robowizard.com/pc.gif | Helpful and Handy Links
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com |
    >

  • How can I print address labels from numbers spread sheet

    How can I print address labels from numbers spread sheet

    CAB,
    The 5163 template has the following dimensional specs:
    Dimensions & Info
    Length: 4.00000"          Height: 2.00000"
    Top Margin: 0.50000"          Bottom Margin: 0.50000"
    Left Margin: 0.18000"          Right Margin: 0.18000"
    Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
    Intended Use: Mailing Labels, Shipping Labels, Address Labels
    There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
    You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
    I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
    So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
    Jerry

Maybe you are looking for