How can I initialize an external hard drive when disk utility won't work?

Have a Seagate 300 GB external firewire drive. Formatted it for Mac. Had worked great and then one day it would not mount, got message box with choices of "initialize", "ignore" and 'eject". Clicking initialize, disk utility comes up with only the "first aid" button showing active. When I click on it nothing happens. As far as I can tgell there are no other options
Any suggestions on how I can repair this drive or recover data would be much appreciated.
Thanks, Jim

OK, I suspect First Aid may be blank since Disk Utility "sees" the device but does not think there's anything on it.
1. How about if you select the drive and then click the Erase tab?
2. Also, what happens if you connect the drive, select Ignore, then open Disk Utility? Does the drive show up?
3. What's your objective here? Do you want to try to recover data from the drive, or simply erase it? If you're looking to recover data from the drive, see my "Data Recovery" FAQ.
4. Do you know what happened before the problem arose? For example, was there a power outage or was the cable or drive suddenly disconnected before the drive was Ejected? Any of these events can result in the drive's partition map being corrupted, leading to the kind of problems you're seeing.
5. Did you build this FireWire drive? That is, buy and enclosure, buy a drive, and install the latter in the former? If so, have you checked the connections?
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

  • How Do I partition an external hard drive using disk utility?

    I have a 500 GB external hard drive that I want to set up so that half the space is for Time Machine backup and the other half as a simple flash drive that will be compatible with all types of computer operating systems?

    A terrible idea. Never use a backup drive for anything but a backup drive. Get another drive for experimenting.
    You can partition an external drive no differently than an internal drive.
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions desired from the drop down. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • How can I back-up my hard drive when my MacBook won't power on?

    The other day my 2 year old MacBook Pro just turned off abruptly and has not powered on since. I took it to the Apple store today and they determined that it's more than likely a problem with the logic board since its not getting power at all and now I'm going to have to get that replaced. Before I send it away I need to backup my hard drive to an external but have no idea how to do that when it won't even power on. We don't have any other working computers in the house but if I absolutely need another computer to accomplish this, I could try to ask a friend to help me out.

    dzwick1 wrote:
    I lost power to my PC. Neither the battery nor the AC adapter works.  I'm shipping the laptop back to the manufacturer for repair, but they advised that I should back up my hard drive before shipping it.  Is there a way to back up my hard drive without having any power on my laptop?
    Do you have another machine?
    You can remove the hard drive and put it in an external enclosure in order to copy the contents to another machine.
    If you don't have another machine, you unfortunately are going to have to find someone to back it up for you. 
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Can I REPAIR my External Hard Drive in Disk Utility without losing all of the Data?

    So, here's the story...
    A while back, I made the mistake of throwing my TM backups in the Trash folder. They were "stuck" there in my External Trash FOREVER until I finally decided to do something about it. I read a few forums that gave instructions on how to delete those volumes through Manually through a series of prompts in TERMINAL. This process actually WORKED and removed the files from the trash, HOWEVER, now the Disk isn't mounting properly. After running "Verify Disk" in Disk Utility, It's telling me that the disk needs to be repaired.
    Fearing that my disk may be wiped completely, I thought I'd transfer all the files over to another HD and Repair the Problematic Disk just to be safe.
    But When I try to copy the files over to another drive with ample space, it gives the message "The operation can’t be completed because the selection contains both backup items and non-backup items."
    I am now at a cross roads, because I DO NOT WANT TO LOSE ALL OF THE DATA ON THIS DRIVE!!!!  What do I do??

    Hi,
    If it is not mounting properly but you can "grab" something in an effort to Transfer it, what are you seeing ?
    Can you limit it to different files/folders ?
    Other than that I would try Carbon Copy Cloner (you can Try before your Buy sort of thing)
    Use this to Create the Backup of the drive.
    Then repair drive.
    8:07 pm      Wednesday; January 1, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • How can I backup an external hard drive using Time Machine?

    How can I backup an external hard drive connected to my MacBook Pro using Time Machine?

    Attach drive, open Time Machine preferences, be sure external drive is not in the Exclude list.

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • How can a format an external hard drive to Fat 32 format

    how can i format an external hard drive to a Fat 32

    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS (FAT)  Click on the Partition button and wait until the process has completed.

  • How can i reformat my external hard drive without loosing any data?

    how can i reformat my external hard drive without loosing any data?

    Welcome to the Apple Support Communities
    It's impossible to format a hard drive without losing the data. One thing you can do before formatting is to copy the files from the external drive to your internal drive, and then, format the external drive. After formatting, copy the files to the external drive again, and everything will be as before formatting it

  • How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    OK. Start with:
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

  • Problem partitioning external hard drive with Disk Utility

    I'm trying to create a new partition in disk utility in an external hard drive using disk utility and every time I click Apply it says that "Disk Utility has lost its connection with the Disk Management Tool and can't continue. Quit and relaunch Disk Utility". It is a 3TB hard disk and I already created the first partition of 2 TB, and when I click the + symbol to add a 1 TB partition and click Apply is when the error shows up. I have restart the mac, unplugged the hard disk but the error still shows up. Anyone has any idea??? Thanks for your help in advance
    David

    I solved this issue. I was able to create the partition with the format MS-DOS and then I erased it to the Mac OS Extended (Journaled) format.
    Now it is working OK. Hope this help someone

  • How can i add an external hard drive to my time capsule

    How can i add an exteranl hard drive to my time capsule

    yes, plug a USB drive .. correctly formatted.. in.

  • IMac Finder cannot see external hard drive but Disk Utility can

    I have a WD external hard drive and it has been attached to my iMac for a year or two.  About two months ago I upgraded to Lion 10.7.5 and hard drive still worked.  Then suddenly about a week ago the iMac no longer sees the external hard drive in Finder.
    I have connected the hard drive to the iMac with different USB cables and into different ports and it makes no difference so deduce there is no issues with the cables or the ports.  I have connected the hard drive to an old Macbook and it can see the harddrive and read some of the info but I really need the hard drive attached to the iMac as I store all my music and photos on the external hard drive.
    I read another thread and someone asked if you can see the hard drive in Disk Utility.  I tried this and Disk Utility can see the hard drive.
    What does this mean?  Any suggestions as to how to get the iMac to see the hard drive so I can access the data on it?
    I dont really know how Disk Utility works therefore if that is any help to me.
    thanks

    Open the Finder.
    From the Finder menu bar click Finder > Preferences then select the General tab.
    Make sure: External disks is selected.

  • Unable to verify or repair my external hard drive with disk utility, reason being ...

    Hello there,
    I have been facing this problem: After I started getting an error 50 error while trying to view in Quicktime player a movie which I had exported from FCPX today, I found that I was not even able to trash the movie [this was a test movie used for export and I had no need for the same].  A little while later when I opened FCPX, I found this message pop up:
    Got a little worried and then tried to verify and repair my hard drives using disk utility, but I could neither verify nor repair the disk.  What should I do now?

    Hello Klaus,
    I think I have been able to overcome the problem/s.
    I have been using my Seagate 2 TB drive [2 USB] with a FW adapter and was using FW connectivity for the past several months without any problems. About 2 months ago I added a 2 TB Lacie, FW, to my workflow and this EHD was daisychained to the Seagate. Had been facing no problem with this arrangement until today.
    Now let me try to tell you what I had done:
    I ejected the Seagate drive with the intention of reconnecting it again. But, no, when I tried to reconnect, this message came up:
    After several attempts, I did this, connected the Lacie by FW to the FW port on the Mac and connected the Seagate by 2 USB. Was I glad to see my Seagate HD icons shining in all their glory on my desktop! I utilised the services of disk utility and was informed that these prodigal sons were absolutely fine.
    I also tried to do this: empty the trash. Was I happy to hear the sound of files being cast out?
    Well, well, at least I will be able to get some peaceful sleep now! I have not yet opened FCPX, but I trust it will also be reading the Seagate HD once again.
    Good night and thanks for being helpful.

  • How can I use my external hard drive on both pc and mac, but also being able to use it to back up my mac data?

    I want to be able to transfer some of my files from my laptop to my macbook, but not all of them. I have a NTFS external hard drive and I have heard about reformatting it so that it can read/write across both systems, but can I still use this hard drive to back up the data on my macbook? If I can, how should I go about reformatting the hard drive?

    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

Maybe you are looking for